Water as an Efficient Solvent for Oxygenation Transformations with 34% Hydrogen Peroxide Catalyzed by some Heteropolyoxometalates

Summary. A highly efficient, selective, fast, and cheap protocol is developed for oxidation of aromatic amines and alcohols utilizing 34% hydrogen peroxide in water catalyzed by some W- and Mo-based heteropolyoxometalates. Findings showed that dodecatungstophosphoric acid, H₃PW₁₂O₄₀, was the most efficient catalyst in the examined oxidation reactions. This methodology may prove to be a valuable alternative for eco-friendly green oxidation. Inherent simplicity, easy work up, and using regenerable catalysts were other key aspects of this oxidation protocol.     

Headspace solvent microextraction of trihalomethane compounds into a single drop

Headspace solvent microextraction (HSME) into a single drop is developed for the determination of six trihalomethanes, CH2Cl2, CHCl3, C4H9Cl, CCl4, C2HCl3, and C2Cl4, in aqueous solution. A drop of benzyl alcohol containing bromoform, as an internal standard, is used for extraction. The analytes are extracted by suspending a 3-microL drop directly from the needle of a microsyringe. The needle passes through the septum of a vessel, and the needle tip appears above the surface of the solution. After the prescribed extraction time, the drop is drawn back into the syringe. The syringe is then removed, and its content is injected directly into a gas chromatography column for analysis. The main parameters affecting the HSME process, such as stirring speed, microdrop volume, sample solution temperature, microsyringe needle temperature, sample volume, solution pH, extracting solvent, and ionic strength of the solution, are studied. Also, the linear range and precision of the method are examined.     

SnCl4 and SbCl5 promoted aromatization of enamines

Aromatic amines have been synthesized efficiently from enamines using SnCl₄ and SbCl₅ in CH₂Cl₂ at room temperature.     

Aminoalkylation with Aldehydes Mediated by Solid Lithium Perchlorate

Summary. The solid LiClO₄-mediated one-pot reaction of aldehydes with secondary amines and C nucleophiles afforded the corresponding aminoalkylation products in high yields. Unlike the previous reported procedure, the aminoalkylation of aldehyde was achieved in the presence of only 0.5 equivalents of solid lithium perchlorate in dichloromethane as the solvent with good to high yields at room temperature.     

Simultaneous photoconjugation of methylene blue and cis-Rh(phen)2Cl2+ to DNA via a synergistic effect

Irradiation of the red-light absorbing dye, methylene blue (MB), in the presence of the metal complex, cis-Rh(phen)2Cl2+ (BISPHEN), leads to irreversible photobinding of both reagents to DNA. Evidence from absorption and emission spectroscopy indicates that the dye is strongly complexed to the DNA at the concentrations used in the experiments and that this complex is unaffected by the presence of BISPHEN. The level of covalent binding is proportional to the absorbed light dose, with the quantum efficiency for covalent binding of BISPHEN to the DNA with 633 nm light equal to 3.5 x 10(-4). Electrospray ionization mass spectrum of a mixture of DNA fragments created by enzymatic degradation of DNA isolated following irradiation indicates that purine adducts are formed with both BISPHEN and the dye. In addition, UV-Vis and high-performance liquid chromatography analyses of the irradiated MB/BISPHEN/DNA mixture and isolated adducts show extensive conversion of the dye and metal complex to the corresponding N-demethylated and aquated derivatives, respectively. Triplet quenchers for MB, for example oxygen and benzoquinone, inhibit both the photoconjugation and the photochemistry of BISPHEN. A mechanism for the synergistic interaction is proposed that involves photoconjugation of both partners to the DNA following oxidation and reduction via electron transfer between 1MB*/DNA and 3MB*/BISPHEN.     

Potentiometric determination of ultratrace amounts of fluoride enriched by zirconia in a flow system

A satisfactory method was described for separation and preconcentration of ultratrace amounts of fluoride ions enriched by zirconia (ZrO₂) as an inorganic ion exchanger. Fluoride ions can be adsorbed rapidly and selectively on zirconia from an acidic solution (pH 4.8) then reversibly desorbed by increasing pH up to 13. A flow system consisting of a column packed with zirconia impregnated on cellulose fibers and an ion-selective electrode was used for the determination of fluoride. The RSD was found to be 1.6% and the detection limit defined by S/N = 3 was 3 × 10⁻⁹ mol L⁻¹. The interference effects of various ions, such as nitrate, sulfate, halides, alkaline, and alkaline earth ions, which may be found in the environmental water, were studied, and it was found that they were tolerated even at high concentrations. The method was applied to determine fluoride in drinking water, which contains ultratrace amounts of fluoride. The concentration of fluoride was found to be 42 μg L⁻¹, which is confirmed by spiking 2 μmol fluoride to the drinking water with a recovery of 99%. Published in Russian in Zhurnal Analiticheskoi Khimii, 2006, Vol. 61, No. 2, pp. 179–183. The text was submitted by the authors in English.     

The use of Nafion-H® as an efficient catalyst for the direct conversion of primary and secondary trimethylsilyl ethers to their corresponding ethers under mild and heterogeneous conditions

Primary and secondary trimethylsilyl ethers were converted to their corresponding ethers in the presence Nafion-H® with good to excellent yields under mild and heterogeneous conditions.     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

The effect of the physical and chemical characteristics of activated carbons on the adsorption energy and affinity coefficient of Dubinin equation

The dependency of adsorption energy (E) and affinity coefficient (beta) of Dubinin equations (Dubinin-Radushkevich (DR) or Dubinin-Astakhov (DA)) on surface chemistry and porosity of activated carbons was investigated by analyzing adsorption of nitrogen, benzene, trichloroethylene (TCE), and water vapor by several surface-modified activated carbons and carbon fibers. For all studied nonpolar adsorbates, carbons with smaller average micropores showed higher adsorption energies independent of their surface chemistry. For water vapor, carbons with higher surface polarities showed higher adsorption energies due to specific adsorbate-adsorbent interactions. Adsorption energies increased with decreasing average micropore widths. betaN2,DR for different carbons were observed to vary in the 0.292-0.539 range. Carbons with higher degrees of mesoporosity had higher betaN2,DR values, while no dependency was observed between betaN2,DR and surface chemistry. A comparison of DR and DA cases indicates that: (1) the average value of betaN2,DA is considerably above the classical value of this parameter; and (2) the range of betaN2,DA values were smaller compared to betaN2,DR, despite a wide range of mesoporosity of carbons examined. Obtained beta(TCE,DR) values varied in the 0.952-1.243 range, with an average value of 1.085+/-0.083, independent of surface chemistry or porosity of activated carbons. A similar result was observed for beta(TCE,DA). betaH2O,DR values of different granular and fibrous activated carbons changed in the range of 0.081-0.271. They depended more on the carbon surface chemistry and less on the porosity. A similar result was obtained when DA equation was considered.