Flow-injection spectrofluorimetric determination of ethylenethiourea

A flow-injection configuration is proposed for the fluorimetric determination of ethylenethiourea. The procedure is based on the inhibitory effect of ethylenethiourea on the oxidation of thiamine to thiochrome by mercury(II). A linear calibration graph was obtained between 0.1 and 2.0 μg mL^–1, with a sampling rate of 40 samples per hour and a relative standard deviation of about 1.11%. The usefulness of the method was tested for the determination of ethylenethiourea residues in water, milk, potatoes, pear, grape and apple. Received: 26 January 1998 / Revised: 6 April 1998 / Accepted: 9 April 1998     

Trehalose-based cyclodextrin analogs: cyclotrehalans (CTs)

A new concept for the de novo synthesis of artificial glyconanocavities is presented. The use of alternating α,α′-trehalose building blocks and (thio)urea segments allows the efficient synthesis of a new family of cyclooligosaccharides, namely cyclotrehalans (CTs), featuring a convex-shaped cavity with an apolar environment. CTs are designed to exhibit molecular inclusion abilities similar to that of cyclodextrins (CDs). Contrary to CDs, CTs expose the monosaccharide β-face to the inner cavity, while the (thio)urea tethers provides some conformational adaptability. High-yielding syntheses of a series of CTs and a preliminary evaluation of their inclusion properties are reported.     

Application to routine analysis of a method to determine multiclass pesticide residues in fresh vegetables by gas chromatography/tandem mass spectrometry

The use of gas chromatography/tandem mass spectrometry (GC/MS/MS) applied to determine multiple pesticide residues in fresh vegetables has been thoroughly studied. A single injection method to detect, confirm and quantify 54 multiclass pesticides has been developed and applied in a routine analysis laboratory. The proposed method consists of a rapid extraction of 15 g of vegetable sample with dichloromethane. An additional clean-up step is not necessary even when injecting 10 microL of extract. Instead the gas chromatograph was fitted with a carbofrit inserted into the glass liner and a guard column. In addition, the detection mode chosen (MS/MS) provides additional selectivity. The method has been validated and applied to 1300 samples in a routine laboratory following specified quality criteria. The recovery efficiencies obtained for all the pesticides ranged between 70.2 and 110.8% at two different fortification levels. The relative standard deviation for quantification (RSD) was lower than 16.7% for all the compounds. Important experimental parameters, such as the conditioning of carbofrit, overload of the analytical column, and cleanliness of the ion trap, were evaluated for their influence on the performance of the method.     

A family of alkynylgold(III) complexes [AuI(mu-{CH2}2PPh2)2Au(III)(C triple bond CR)2] (R = Ph, tBu, Me3Si): facile and reversible comproportionation of gold(I)/gold(III) to digold(II)

The symmetric digold(II)dichloride bis(ylide) complex [Au2Cl2(mu-{CH2}2PPh2)2] reacts with acetylides to form the asymmetric heterovalent gold(I)/gold(III) complexes [AuI(mu-{CH2}2PPh2)2AuIII(CCR)2] [R = Ph, tBu, and SiMe3], the phenyl analogue of which was characterized by X-ray crystallography. These compounds represent the first examples of gold(III) complexes containing two acetylide ligands. [AuI(mu-{CH2}2PPh2)2AuIII(CCPh)2] undergoes a reversible comproportionation reaction upon treatment with [Ag(ClO4)tht] to give the symmetric digold(II) cationic complex [Au2(tht)2(mu-{CH2}2PPh2)2](ClO4)2. If this complex is treated with phenylacetylene in the presence of base, the heterovalent gold(I)/gold(III) complex is re-formed. This reversible interconversion between binuclear gold(I)/gold(III) and digold(II) bis(ylide) complexes is unprecedented.     

Identification of the main by-products of the developing agent N-hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine in photographic effluents by liquid chromatography/mass spectrometry

N-Hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine (CD(4)) is commonly used as a developing agent in color photographic processes. The main by-products formed in developer baths used in the process were separated and identified by liquid chromatography/electron ionization mass spectrometry (LC/EI-MS) and liquid chromatography/atmospheric pressure ionization mass spectrometry (LC/API-MS). A number of side reactions, in addition to the main reactions involved in the developing process, were found to occur. Such side reactions involved in the formation of CD(4) by-products included oxidation, hydroxylation, sulfonation and the formation of coupling products. A reaction pathway for the degradation of CD(4) based on the nature of the by-products identified is proposed and discussed.     

Selection of thermotolerant yeasts for simultaneous saccharification and fermentation (SSF) of cellulose to ethanol

A total of 27 yeast strains belonging to the groupsCandida, Saccharomyces, andKluyveromyces were screened for their ability to grow and ferment glucose at temperatures ranging 32-45°C. K. marxianus andK. fragilis were found to be the best ethanol producing organisms at the higher temperature tested and, so, were selected for subsequent simultaneous saccharification and fermentation (SSF) studies.     

Reaction of methyl 4-nitrobenzenesulfonate with Br- in water-formamide tetradecyltrimethylammonium bromide micellar solutions

Summary The reaction methyl 4-nitrobenzenesulfonate + Br^- was studied in water-formamide tetradecyltrimethylammonium bromide micellar solutions. A pseudophase kinetic model was used to quantitatively rationalize the kinetic micellar effects observed     

Use of chemometrics and mid infrared spectroscopy for the selection of extraction alternatives to reference analytical methods for total fat isolation

Chemometric techniques have been used to compare two methods for fat extraction, namely focused microwave-assisted Soxhlet extraction (FMASE) and dynamic ultrasound-assisted extraction (DUAE), with the conventional Folch method, frequently used as reference. The data generated by a mid infrared spectrometer, after appropriate treatment, provide a simple and effective way for the detection of potential alterations of the fat obtained with the assistance of auxiliary energies, in this case, microwaves and ultrasounds. The results thus obtained are as compared with those from the Folch method, a mild extraction method with a view to finding faster alternatives for routine analysis. Moreover, classification of the samples between cookies and snacks based on extraction kinetics studies was possible, thus demonstrating the importance of these studies for the development of analytical methods. Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) were used for both purposes, namely detection of alterations and classification of the samples as a function of their extraction kinetics, while K Nearest Neighbours (KNN) and Soft Independent Modelling of Class Analogy (SIMCA), based on PCA, models were generated in order both to predict the extraction kinetics of unknown samples, thus adjusting the extraction time as a function of the matrix, and find out explanation to the different extraction kinetics.     

The influence of cosolvent polarity on the flow properties of hydroalcoholic gels: empirical models

The aim of this study was to investigate the influence of cosolvent polarity on the rheological flow properties of aqueous and hydroalcoholic gels obtained from the Carbopol Ultrez 10 base and used for topical applications. Specifically, we have examined the effect of pH (range 4.0--7.0) on the consistency and flow properties of dispersed systems in water and mixtures--15 : 85% v/v of methanol : water, ethanol : water, n-propanol : water and n-butanol : water--at a constant polymer concentration of 0.3% w/w. The gels, which had decreasing polarity values in the jellifying medium, showed qualitatively similar flow behavior, characteristic of pseudoplastic systems, and all of the flow curves were adjusted to the Ostwald model. Sigmoidal dose response functions were calculated to describe the flow and consistency indexes as a function of pH. As a result, the influence of alcohol polarity on the polymer network has been assessed meaningfully using the empirical parameters obtained: maximum consistency index value (k(max)), pH value required for 50% development of polymer network (pH(50)), and asymptotic flow index value (n(min)) for the fully structured gels.     

Excess molar enthalpy of binary mixtures of hexane+ethyl benzene, <Emphasis Type="Italic">o</Emphasis>-xylene, <Emphasis Type="Italic">m</Emphasis>-xylene and <Emphasis Type="Italic">p</Emphasis>-xylene at 298.15 K

Summary This paper reports excess molar enthalpies of the binary systems hexane+ethyl benzene, hexane+o-xylene, hexane+m-xylene and hexane+p-xylene at 298.15 K and atmospheric pressure, over the whole composition range. The data was measured directly using a Calvet microcalorimeter. The excess magnitude was correlated to a Redlich-Kister type equation for each mixture. Also, we will discuss the results for the four mixtures studied here and by comparison with the same binary systems but containing propyl propanoate as first component. Finally, we will correlate our results with the Nitta-Chao and the three UNIFAC theoretical approximations.