Photoinduced magnetism caused by charge-transfer excitations in tetracyanoethylene-based organic magnets

The photoinduced magnetism in Mn-tetracyanoethylene (TCNE) molecule-based magnets is ascribed to charge-transfer excitations from manganese to TCNE. Charge-transfer energies are calculated using density functional theory; photoinduced magnetization is described using a model Hamiltonian based on a double-exchange mechanism. Photoexciting electrons from the manganese core spins into the lowest unoccupied orbital of TCNE with photon energies around 3 eV increase the magnetization through a reduction of the canting angle of the manganese core spins for an average electron density on TCNE less than one. When photoexciting with a smaller energy, divalent TCNE molecules are formed. The delocalization of the excited electron causes a local spin flip of a manganese core spin.     

Addition of trifluoromethyltrimethylsilane to acyl phosphonates: synthesis of TMS-protected 1-alkyl-1-trifluoromethyl-1-hydroxyphosphonates and 1-aryldifluoroethenyl phosphates

Addition reactions of nucleophilic CF3TMS to acyl phosphonates were investigated. Various acyl phosphonates reacted readily with CF3TMS in the presence of K2CO3 in DMF at rt to give 1-alkyl-2,2,2-trifluoro-1-trimethylsilyloxyethylphosphonate in 70-90% yields. When benzoyl phosphonates were used as starting material, after addition of CF3, the formed alcoholate undergoes phosphonate-phosphate rearrangement to form the acyl anion, followed by elimination of F- to give 1-aryldifluoroethenyl phosphates in 87-97% yields. As a representative example, vinylphosphate 6a was converted into 2,2-difluoro-1-phenylethanone 7 with 6 N HCl/EtOH/reflux or CAN/NaOH/MeOH/0 degrees C in 82-90% yields.     

Studies on the pitting corrosion of zinc in aqueous solutions II. Measurement of pitting corrosion currents operating under natural conditions

A simple experimental arrangement was applied for the measurement and the evaluation of pitting corrosion currents operating under natural conditions. The feasibility of the procedure was examined by using Zn as a test metal, K₂CrO₄, Na₂HPO₄ and Na₂WO₄ as inhibitors, and Cl^?, Br^? and I^? as pitting corrosion agents. Both the type and concentration of the inhibiting and corroding agents were varied in a programmed manner. In CrO₄^2? and HPO₄^2? solutions, the pitting corrosion currents started to flow after an induction period, which decreased with increase in the concentration of the attacking agent. In WO₄^2? solutions, on the other hand, initially high currents were recorded due to the reduction of the agent to soluble, non-inhibiting species.In all solutions tested the corrosion current reached steady-state values which depended on the type and concentration of both the inhibiting and the aggressive anions. When keeping the inhibitor concentration constant, the corrosion current varied with the concentration of the aggressor according to: log i_corr = a₁ + b₁ log c_agg On the other hand, in solutions of constant aggressor concentration, with varying inhibitor amounts, the relation was: log i_corr = a₂ ? b₂ log c_inh where a₁(a₂) and b₁(b₂) are constants.The two equations were derived theoretically on the basis of competitive adsorption of the two counteracting agents on the surface of the metal. Comparison between the experimental values of a and b, with the corresponding terms of the theoretical equations was made.The aggressivity of the three tested anions decreases in the order Cl^? > Br^? > I^?, whilst inhibition varied as CrO₄^2? > HPO₄^2? > WO₄^2?.     

On weighted q-Daehee polynomials with their applications

In this paper, we first consider a generalization of Kim’s $p$-adic $q$-integral on ${\mathbb{Z}}_p$ including parameters $\alpha$ and $\beta$. By using this integral, we introduce the $q$-Daehee polynomials and numbers with weight $\left(\alpha ,\beta \right)$. Then, we obtain some interesting relationships and identities for these numbers and polynomials. We also derive some correlations among $q$-Daehee polynomials with weight $\left(\alpha ,\beta \right)$, $q$-Bernoulli polynomials with weight $\left(\alpha ,\beta \right)$ and Stirling numbers of second kind.     

Analysis of Biogenic Amines Using Immunoassays,HPLC, and a Newly Developed IC-MS/MS Technique in Fish Products—A Comparative Study

In this study, comparative analyses were carried out with ion chromatography mass-spectrometry (IC-MS/MS) which has no derivatization step, high-performance liquid chromatography (HPLC) technique, as well as two quantitative and two semi-quantitative immunoassays. The results demonstrated that HPLC and quantitative immunoassay methods were well-correlated with IC-MS/MS in determining histamine in various types of fish products. The best correlation was observed with the HistaSure ELISA Fast Track kit (R² = 0.9903). More than half of the values (68%) obtained by two methods were also statistically similar. The results of semi-quantitative test kits also supported histamine values estimated by quantitative methods, with some exceptions. The best results were found for HistaSure Lateral Flow in supporting the quantitative techniques. Therefore, these methods are found suitable for monitoring histamine in fish products in terms of food safety. Good correlations were also observed HPLC and IC-MS/MS in determining cadaverine, putrescine, and tyramine with the highest value observed for tyramine as R² = 0.9785. However, no correlation was observed for other biogenic amines, and the majority of the results were significantly different from each other for these amines (p < 0.05). The differences may be caused by the drawbacks reported previously for HPLC. However, further studies are required to confirm the possible effects. This study provides a comparative evaluation of several methods in terms of their suitability in determining biogenic amines in fish products for both monitoring and regulatory purposes.     

Graphene Paper with Sharp‐edged Nanorods of Fe−CuMOF as an Excellent Electrode for the Simultaneous Detection of Catechol and Resorcinol

A flexible composite paper Fe?Cu‐based metal‐organic framework (MOF)/reduced graphene oxide (rGO) (Fe?CuMOF/rGO) electrode was prepared by using a simple electrochemical method for the simultaneous detection of catechol (CC) and resorcinol (RC). Free‐standing, flexible and double‐sided Fe?CuMOF/rGO composite paper was obtained by applying the electrochemical deposition process on the rGO paper electrode in the solution containing Fe?CuMOF composite. The morphological analysis of Fe?CuMOF/rGO composite paper showed that sea urchin‐like structures formed on the rGO electrode surface consist of numerous sharp‐edged nanorods of Fe?CuMOF. Flexible Fe?CuMOF/rGO paper electrode exhibited high sensitivity, wide linear range and low detection limit for the simultaneous determination of CC and RC. The linear ranges of concentration for CC and RC were 0.1–800 and 0.1–720 μM, respectively, and the corresponding limits of detection (S/N=3) were 0.016 and 0.020 μM. The outstanding performance of this flexible electrode could be attributed to the sharp‐edged urchin‐like Fe?CuMOF structures which provide an increment of the surface area and the electrochemical activity of the composite paper electrode. Stability tests showed that Fe?CuMOF/rGO composite paper electrode has excellent flexibility, high durability, and good reproducibility. Furthermore, this electrode exhibited high sensitivity and selectivity for the determination of CC and RC in real sample analysis.     

Stochastic Ordering Among Success Runs Statistics in a Sequence of Exchangeable Binary Trials

A new scheme-distribution-based representation is presented for the cumulative distribution function of the number of success runs of length k in a sequence of exchangeable binary trials. By utilizing this new representation, some stochastic ordering results are obtained to compare success runs. The results are illustrated for beta-binomial distributions of order k.     

Liquid chromatographic determination of lumacaftor in the presence of ivacaftor and identification of five novel degradation products using high-performance liquid chromatography ion trap time-of-flight mass spectrometry

Lumacaftor is a transmembrane conductance regulator potentiator drug, prescribed for the treatment of cystic fibrosis in patients who are homozygous for the F508del mutation. Quantitation of lumacaftor besides its degradation products and ivacaftor was achieved on a fused-core silica particle column packed with pentafluorophenylpropyl stationary phase (Ascentis Express F5, 2.7 μm particle size 100 mm × 4.6 mm; Supelco) using gradient elution (A: 0.1% [v/v] formic acid in water, B: 0.1% [v/v] formic acid in acetonitrile [the mobile phase pH 2.5]). A constant flow rate at 1 mL/min was applied, and the detection was realized using a photodiode array detector set at 216 nm. The pseudo tablet formulation of the lumacaftor/ivacaftor fixed-dose combination preparation, namely, Orkambi®, was prepared in vitro and used for the analytical performance validation and method application studies. In addition, five novel degradation products, four of which even have no Chemical Abstracts Services registry number, were identified using high-resolution mass spectrometry instrument, and their possible mechanisms of formation were proposed. According to current literature, this paper can be regarded as the most comprehensive liquid chromatographic study on lumacaftor determination, among its counterparts.     

Some topological and geometrical properties of the sequence space e (u,p)

In this paper, we introduce the sequence space e^r(u,p) and investigate its some topological and geometrical properties such as basis, α-, β-, γ- duals and the uniform Opial property.