Assessment of Inorganic Fibre Burden in Biological Samples by Scanning Electron Microscopy – Energy Dispersive Spectroscopy

A method based on cloud point extraction (CPE) separation/preconcentration of trace cadmium as a prior step to its determination by graphite furnace atomic absorption spectrometry (GFAAS) has been developed. If the system temperature is higher than the cloud point temperature (CPT) of the nonionic surfactant of p-octyl polyethyleneglycolphenyether (Triton X-100), the complex of Cd²⁺ with 1-(2-pyridylazo)-2-naphthol (PAN) could be extracted into surfactant-rich phase. The chemical variables affecting CPE were evaluated and optimized. Under the optimum conditions, preconcentrating 10.0 mL of water samples permitted a limit of detection of 5.9 ng · L⁻¹ (3σ) for cadmium with an enhancement factor of 50 and a relative standard deviation of 2.1% (n = 11, c = 2.0 ng · mL⁻¹). The method was applied to the determination of cadmium in reference material and water samples with satisfactory results.     

Validation of methodology for determination of the mercury methylation potential in sediments using radiotracers

Experiments to determine the mercury methylation potential were performed on sediments from two locations on the river Idrijca (Slovenia), differing in ambient mercury concentrations. The tracer used was the radioactive isotope ¹⁹⁷Hg. The benefit of using this tracer is its high specific activity, which enables spikes as low as 0.02 ng Hg²⁺ g⁻¹ of sample to be used. It was therefore possible to compare the efficiency of the methylation potential experiments over a range of spike concentrations from picogram to microgram levels. The first part of the work aimed to validate the experimental blanks and the second part consisted of several series of incubation experiments on two different river sediments using a range of tracer additions. The results showed high variability in the obtained methylation potentials. Increasing Hg²⁺ additions gave a decrease in the percentage of the tracer methylated during incubation; in absolute terms, the spikes that spanned four orders of magnitude (0.019–190 pg g⁻¹ of sediment slurry) resulted in MeHg formation between 0.01 and 0.1 ng MeHg g⁻¹ in Podroteja and Kozarska Grapa. Higher spikes resulted in slightly elevated MeHg production (up to a maximum of 0.27 ng g⁻¹). The values of methylation potential were similar in both sediments. The results imply that the experimental determination of mercury methylation potential strongly depends on the experimental setup itself and the amount of tracer added to the system under study. It is therefore recommended to use different concentrations of tracer and perform the experiments in several replicates. The amount of mercury available for methylation in nature is usually very small. Therefore, adding very low amounts of tracer in the methylation potential studies probably gives results that have a higher environmental relevance. It is also suggested to express the results obtained in absolute amounts of MeHg produced and not just as the percentage of the added tracer.     

Characterization of vibrational transition modes by use of normal forms

Summary In this paper we use the Birkhoff-Gustavson perturbation theory to analyze the vibrational modes of two linearly coupled Morse oscillators in the transition region from normal modes to local modes. Our study is based on: truncation of the Hamiltonian written in normal mode coordinates at the 4th order, transformation to normal form and analytical study; construction and use of the approximate integrals of motion of the exact Hamiltonian according to Birkhoff and Gustavson theory. By comparison with a previous analytical study, we demonstrate that perturbation theory, based either on local or normal modes can be used to accurately describe transition modes.     

Electrochemical Organic Synthesis of Electron-Rich Biaryl Scaffolds: An Update

Biaryl scaffolds are widely spread in biologically important natural products, in numerous therapeutic agents, but they are also considered a privileged class of ligands and (organo)catalysts; therefore, the development of efficient alternative methodologies to prepare such compounds is always attracting much attention. The present review discusses the organic electrosynthesis of biaryls starting from phenols, anilines, naphthols, and naphthylamines. The most significant examples of the works reported in the last decade are presented and classified according to the single class of molecules: after the introduction, the first three sections relate to the reactions of phenols, naphthols, and anilines, respectively; the other two sections refer to cross-coupling and miscellaneous reactions.     

Novel,Stable Catholyte for Aqueous Organic Redox Flow Batteries: Symmetric Cell Study of Hydroquinones with High Accessible Capacity

Owing to their broad range of redox potential, quinones/hydroquinones can be utilized for energy storage in redox flow batteries. In terms of stability, organic catholytes are more challenging than anolytes. The two-electron transfer feature adds value when building all-quinone flow battery systems. However, the dimerization of quinones/hydroquinones usually makes it difficult to achieve a full two-electron transfer in practical redox flow battery applications. In this work, we designed and synthesized four new hydroquinone derivatives bearing morpholinomethylene and/or methyl groups in different positions on the benzene ring to probe molecular stability upon battery cycling. The redox potential of the four molecules were investigated, followed by long-term stability tests using different supporting electrolytes and cell cycling methods in a symmetric flow cell. The derivative with two unoccupied ortho positions was found highly unstable, the cell of which exhibited a capacity decay rate of ~50% per day. Fully substituted hydroquinones turned out to be more stable. In particular, 2,6-dimethyl-3,5-bis(morpholinomethylene)benzene-1,4-diol (asym-O-5) displayed a capacity decay of only 0.45%/day with four-week potentiostatic cycling at 0.1 M in 1 M H₃PO₄. In addition, the three fully substituted hydroquinones displayed good accessible capacity of over 82%, much higher than those of conventional quinone derivatives.     

Photoactive Zr and Ti Metal-Organic-Frameworks for Solid-State Solar Cells

Solid-state photovoltaic cells based on robust metal-organic frameworks (MOFs), MIL-125(Ti), MIL-125(Ti)-NH₂, UiO-67, Ru(bpy)₂-UiO-67, (bpy 2,2‘-bipyridine) as active components and spiro-MeOTAD (MeOTAD 2,2‘,7,7‘-tetrakis[N,N-di(p-methoxyphenyl)amino]-9,9′-spirobifluorene) as hole transporting layer have been prepared., The photovoltaic response of this material increases in the presence of bathochromic −NH₂ groups on the linker or Ru (II) polypyridyl complexes light harvester. These results show that the strategies typically employed in photocatalysis to enhance the photocatalytic activity of MOFs can also be applied in the field of photovoltaic devices.     

A Selective,Nontoxic, OFF–ON Fluorescent Molecular Sensor Based on 8‐Hydroxyquinoline for Probing Cd2+ in Living Cells

In spite of the fact that cadmium(II) has been recognized as a highly toxic element and that excessive exposure to this metal ion has been reported to have many adverse effects on human health, very few selective and specific fluorescent probes are available for imaging Cd²⁺ in living cells. Herein, we report the spectroscopic and photochemical characterization of 5‐(5‐chloro‐8‐hydroxyquinolinylmethyl)‐2,8‐dithia‐5‐aza‐2,6‐pyridinophane ( L ) as a fluorescent sensor for the selective imaging of Cd²⁺ in living cells. In particular, the response of L to Cd²⁺ was first assessed in aqueous solutions, sodium dodecyl sulfate micelles, and liposomes, and subsequently in living cells by fluorescence microscopy techniques. Cytofluorimetric analyses of leukemic HL‐60 cells loaded with L also allowed evaluation of the toxicity of the probe and the selective analysis of its intracellular fluorescence in the presence of Cd²⁺. Furthermore, the 1:1 complex species [Cd( L )H₂O]²⁺ responsible for the OFF–ON chelation enhancement of fluorescence (CHEF) effect on L was structurally characterized; time‐dependent DFT calculations allowed the prediction of theoretical excitations, which were comparable with the experimental ones.     

Highly enantioselective acylation of chlorohydrins using Amano AK lipase from P. fluorescens immobilized on silk fibroin–alginate spheres

Aromatic, allylic, and aliphatic compounds containing a chlorohydrin group were selected as substrates for the enzymatic kinetic resolution mediated by Amano AK lipase from Pseudomonas fluorescens immobilized in silk friboin-alginate spheres. Thus, the enantioselectivity of the process was sufficient for the production of the desired alcohols and acetates in good yields and high enantiomeric purities. This Letter provides a simple, cheap, and practical protocol for enantioselective synthesis of chlorohydrins and reinforces the versatility of silk fibroin as supports for heterogeneous catalysts.     

Volatile components of Centaurea bracteata and C. pannonica subsp. pannonica growing wild in Croatia

This paper reports on the volatile components of oils from the aerial parts (CBA) and roots (CBR) of Centaurea bracteata Scop. and aerial parts of C. pannonica (Heuffel) Simonkai subsp. pannonica (CPA), two Asteraceae growing wild in Croatia. The volatile components, obtained by hydrodistillation, were determined by GC-MS analysis. The yields (w/w) of the dried oils were 0.10% (CBA), 0.22% (CBR) and 0.09% (CPA), respectively. A total of 91 compounds were identified accounting for 91.1%, 93.3% and 87.9% of the total oil for CBA, CBR and CPA, respectively. All the samples were characterized mainly by hydrocarbons (7.1-34.1%), fatty acids (9.7-45.9%), and oxygenated sesquiterpenes (15.2-16.6%). The major components of the samples were hexadecanoic acid (8.1-31.1%), nonacosane (0.6-13.4%) and caryophyllene oxide (4.5-11.9%). Monoterpenes, both hydrocarbons and oxygenated, were either absent or present in low amounts in all the oils. The similarity in the oil contents is consistent with the two species being placed in the same section, Jacea.     

Electroanalytical Determination of N‐Nitrosamines in Aqueous Solution Using a Boron‐Doped Diamond Electrode

The electrochemical methods cyclic and square‐wave voltammetry were applied to develop an electroanalytical procedure for the determination of N‐nitrosamines (N‐nitrosopyrrolidine, N‐nitrosopiperidine and N‐nitrosodiethylamine) in aqueous solutions. Cyclic voltammetry was used to evaluate the electrochemical behaviors of N‐nitrosamines on boron‐doped diamond electrodes. It was observed an irreversible electrooxidation peak located in approximately 1.8 V (vs. Ag/AgCl) for both N‐nitrosamines. The optimal electrochemical response was obtained using the following square‐wave voltammetry parameters: f=250 Hz, E_sw=50 mV and E_s=2 mV using a Britton–Robinson buffer solution as electrolyte (pH 2). The detection and quantification limits determined for total N‐nitrosamines were 6.0×10^?8 and 2.0×10^?7 mol L^?1, respectively.