Intense geodesic acousticlike modes driven by suprathermal ions in a tokamak plasma

Intense axisymmetric oscillations driven by suprathermal ions injected in the direction counter to the toroidal plasma current are observed in the DIII-D tokamak. The modes appear at nearly half the ideal geodesic acoustic mode frequency, in plasmas with comparable electron and ion temperatures and elevated magnetic safety factor (q_{min}>or=2). Strong bursting and frequency chirping are observed, concomitant with large (10%-15%) drops in the neutron emission. Large electron density fluctuations (n[over ]_{e}/n_{e} approximately 1.5%) are observed with no detectable electron temperature fluctuations, confirming a dominant compressional contribution to the pressure perturbation as predicted by kinetic theory. The observed mode frequency is consistent with a recent theoretical prediction for the energetic-particle-driven geodesic acoustic mode.     

Quark-hadron duality in neutron (3He) spin structure

We present experimental results of the first high-precision test of quark-hadron duality in the spin-structure function g_{1} of the neutron and 3He using a polarized 3He target in the four-momentum-transfer-squared range from 0.7 to 4.0 (GeV/c);{2}. Global duality is observed for the spin-structure function g_{1} down to at least Q;{2}=1.8 (GeV/c);{2} in both targets. We have also formed the photon-nucleon asymmetry A1 in the resonance region for 3He and found no strong Q2 dependence above 2.2 (GeV/c);{2}.     

Characterization of Standard Reference Material 2941, uranyl-ion-doped glass, spectral correction standard for fluorescence

Standard Reference Material^® (SRM^®) 2941 is a cuvette-shaped, uranyl-ion-doped glass, recommended for use for relative spectral correction of emission and day-to-day performance validation of fluorescence spectrometers. Properties of this standard that influence its effective use or contribute to the uncertainty in its certified emission spectrum have been explored here. These properties include its photostability, absorbance, dissolution rate in water, anisotropy, temperature coefficient of fluorescence intensity, and fluorescence lifetimes. The expanded uncertainties in the certified spectrum are about 4% around the peak maximum at 526 nm, using an excitation wavelength of 427 nm. The SRM also exhibits a strong resistance to photodegradation, with no measurable decrease in fluorescence intensity even after 8 h of laser irradiation.     

Capacity limits of information transport in fiber-optic networks

The instantaneous optical Kerr effect in optical fibers is a nonlinear phenomenon that can impose limits on the ability of fiber-optic communication systems to transport information. We present here a conservative estimate of the "fiber channel" capacity in an optically routed network. We show that the fiber capacity per unit bandwidth for a given distance significantly exceeds current record experimental demonstrations.     

Distinguishing and quantification of the human visual pathways using high-spatial-resolution diffusion tensor tractography

Quantification of the living human visual system using MRI methods has been challenging, but several applications demand a reliable and time-efficient data acquisition protocol. In this study, we demonstrate the utility of high-spatial-resolution diffusion tensor fiber tractography (DTT) in reconstructing and quantifying the human visual pathways. Five healthy males, age range 24–37 years, were studied after approval of the institutional review board (IRB) at The University of Texas Health Science Center at Houston. We acquired diffusion tensor imaging (DTI) data with 1-mm slice thickness on a 3.0-Tesla clinical MRI scanner and analyzed the data using DTT with the fiber assignment by continuous tractography (FACT) algorithm. By utilizing the high-spatial-resolution DTI protocol with FACT algorithm, we were able to reconstruct and quantify bilateral optic pathways including the optic chiasm, optic tract, optic radiations free of contamination from neighboring white matter tracts.     

Ambiguous anti-fouling surfaces: Facile synthesis by light-mediated radical polymerization

In an attempt to create a polymer brush-based platform for the systematic study for anti-biofouling surfaces, the benefits of surface initiated, visible light-mediated radical polymerization are utilized to fabricate well-defined, chemically ambiguously patterned surfaces. A variety of analytical tools are used to illustrate the precise tuning of surface chemistry and thoroughly characterize spatially well-defined, hydrophilic/hydrophobic surfaces composed of poly(ethylene glycol methacrylate) and poly(trifluoroethyl methacrylate) with chemical definition on the micron scale. Advantages of both visible light-mediated photopolymerization and traditional copper-catalyzed atom transfer radical polymerization are combined to achieve both high spatial control and expanded monomer tolerance. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 253–262     

Characterization of deposits produced by TEA CO2 pulsed laser ablation of silicon mono- and dioxide

Silicon based deposits were prepared by TEA CO₂ pulsed laser ablation (PLA) of SiO and SiO₂ targets in the atmosphere of selected gases (N₂, He, Ne, Ar, Kr). These deposits possess high specific area of several hundreds m² per gram. Owing to the high specific area, some chemical groups and hydrogen related radical were detected by means of FTIR and EPR analyses and theoretical calculations: silyl (E′ center) Si, silylen Si:, silanon SiO, POL (peroxy linkage) SiOOSi and/or NBOHC (non-bridging oxygen hole center) SiO, POR (peroxy radical) SiOO and dioxysilirane Si(O)₂. In SiO₂ deposits the concentration of silyl Si resp. POR SiOO was determined to be 5.8 × 10¹⁸/g resp. 6.2 × 10¹⁹/g. In SiO deposits the ratio [Si:]:[Si] = (3.1-5.7) × 10¹⁹/g: (5.3-9.8) × 10¹⁹/g was measured. Estimated concentration of [Si] in deposits was increased nearly five times in comparison with SiO target. After exposure of the SiO deposits to H₂ EPR doublet with hyperfine splitting of 7.7 mT was observed. The best agreement between calculated theoretical and experimental values was found for the model [(HO)₃SiO]₂HSi. FTIR measurements and calculations of the silanol theoretical model clusters enabled us to discuss the chemical surroundings of the silanol and to determine the defects in the deposits.     

Nanostructural aspects, free volume and phase constitution of rapidly solidified Nd-Fe-B

A complement of experimental characterization techniques - positron annihilation spectroscopy (PAS), transmission electron microscopy, synchrotron X-ray diffraction and elevated temperature ac and dc magnetic measurements - were applied to the study of melt-quenched stoichiometric Nd₂Fe₁₄B ribbons modified by various amounts of the alloying additions Ti and C. These alloying additions are known to enhance the glass-forming ability in Nd₂Fe₁₄B melts, allowing for a wider processing window to produce homogeneous nanoscale materials with tailored magnetic properties. The experimental techniques used in this study reveal the complex multi-phase and multi-scale nature of the ribbons, a result that had escaped detection by lower-resolution techniques. The as-quenched ribbons were found to consist of at least three phases: α-Fe nanocrystals, poorly crystalline Nd₂Fe₁₄B and glass. The measured weight fraction of glass does not show a direct correspondence with quenching wheel speed, a result attributed to the complexity of the melt-spinning heat-transfer process. The Curie temperature of the glassy component of the ribbons varies in a non-systematic way with both Ti and C alloying addition content and wheel speed. PAS provides quantitative measurements of the S (or ‘shape’)-parameter which represents the size of a void or open volume in the material volume probed. The experimental results indicate that an excess of free volume in the glass is associated with increased glass stability, a counterintuitive conclusion. However, the results are consistent with the model of Sietsma and Thijsse [Phys. Rev. B 52 (5) (1995) 3248] who propose that thermal relaxation in glass causes the larger free volume regions in the amorphous structure to break up into smaller voids, which necessarily increases the total number of voids, but decreases the volume per void. This void breakup fosters the processes of cooperative diffusion and subsequent devitrification. It is concluded that the free volume concentration in the amorphous component of melt-spun Nd₂Fe₁₄B alloys produced by the highest quenching wheel speeds and Ti/C alloying addition content is thus not sufficient to allow cooperative diffusion to take place, resulting in an increased stability against devitrification.     

Differentiating between Acidic and Basic Surface Hydroxyls on Metal Oxides by Fluoride Substitution: A Case Study on Blue TiO2 from Laser Defect Engineering

Both oxygen vacancies and surface hydroxyls play a crucial role in catalysis. Yet, their relationship is not often explored. Herein, we prepare two series of TiO₂ (rutile and P25) with increasing oxygen deficiency and Ti³⁺ concentration by pulsed laser defect engineering in liquid (PUDEL), and selectively quantify the acidic and basic surface OH by fluoride substitution. As indicated by EPR spectroscopy, the laser-generated Ti³⁺ exist near the surface of rutile, but appear to be deeper in the bulk for P25. Fluoride substitution shows that extra acidic bridging OH are selectively created on rutile, while the surface OH density remains constant for P25. These observations suggest near-surface Ti³⁺ are highly related to surface bridging OH, presumably the former increasing the electron density of the bridging oxygen to form more of the latter. We anticipate that fluoride substitution will enable better characterization of surface OH and its correlation with defects in metal oxides.