High power single-frequency continuous-wave Nd:YVO4 master-oscillator power amplifier

We report a highly-efficient, high-power, single-frequency Nd:YVO₄ master-oscillator power-amplifier with near-diffraction-limited output beam quality. A diode-pumped Nd:YVO₄ ring laser incorporating a passive method for suppressing axial-mode-hopping was employed as the master-oscillator, and was amplified by a three-stage diode-end-pumped Nd:YVO₄ amplifier, yielding 79 W of output with an extraction efficiency of 29%. The overall power gain was 15 dB for an input power from the master-oscillator of 2.4 W, and the M² parameter was less than 1.5 at the maximum power. The prospects for a further increase of power and brightness via this approach are considered. PACS 42.55.Xi; 42.60.Da; 42.60.Jf     

Silicon etching in Cl2 environment

The ion-beam-assisted etching of silicon in Cl₂ environment is considered. The theoretically calculated dependences of silicon etching rate on the flux of Cl₂ molecules at different ion current densities are compared with experimentally measured. The composition of the adsorbed layer is determined. It is found that SiCl₂ molecules prevail in the adsorbed layer. The reciprocal of relative concentration of SiCl₂ molecules in the adsorbed layer linearly depends on the ion-to-neutral flux ratio.     

The effect of surface crystalline layers on asymmetric off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons

The off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons was measured using a pick-up coil wound around the sample. One side of a ribbon was etched in hydrofluoric acid solution during various times in order to change the thickness of the surface crystalline layer appearing after annealing. The asymmetric two-peak field dependence of the off-diagonal impedance was observed for all samples. The evolution of the off-diagonal magnetoimpedance with the change in the ribbon thickness is analyzed.     

Design of a widely tunable laser with a chirped ladder filter

We theoretically investigated a digitally tunable laser with a chirped ladder filter and a ring resonator to obtain a wide wavelength tuning range covering the whole C- or L- band. The clear relation between the tuning range and laser structure, especially the ladder filter, is described analytically. The introduction of a chirped structure into a ladder filter is effective in achieving both wide tunability and a stable lasing mode. A numerical simulation based on multimode rate equations shows that a tuning range of over 40 nm and a mode suppression ratio over 40 dB can be achieved by introducing a chirped ladder filter.     

A Reverse of bessel’s inequality in 2-inner product spaces and some grüss type related results with applications

A reverse of Bessel’s inequality in 2-inner product spaces and companions of Grüss inequality with applications for determinantal integral inequalities are given.     

Photoemission studies of oxygen adsorbed on a LiAl(1 1 0) alloy surface: Role of Li segregation

We investigated that the effect of the number of segregated Li atoms on the rate of oxidation on a LiAl alloy surface. Oxygen molecules adsorbed on the LiAl alloy react with the surface atoms to form stable oxides. The segregated Li atoms at reconstructed surfaces (c(2×2) and (2×1)) enhance the oxidation rate and form stable LiAlO_x and Li₂O. The degree of enhancement of oxidation by segregated Li atoms varies as a function of O₂ exposure and annealing temperature, where the latter is directly related to the mode of surface reconstruction by Li segregation.     

Trace element concentrations from São Francisco River - PR analyzed with PIXE technique

Summary Kulcsszavak (angolul, ha nem azonos az elozovel)     

A new approach towards peptidosulfonamides: synthesis of potential inhibitors of bacterial peptidoglycan biosynthesis enzymes MurD and MurE

Peptidosulfonamides are an emerging group of peptidomimetics with a variety of applications in medicinal chemistry. We present a novel approach to the synthesis of peptidosulfonamides, and apply it to a series of new potential inhibitors of the bacterial peptidoglycan biosynthesis enzymes MurD and MurE. The synthesis was conducted via N-phthalimido β-aminoethanesulfonyl chlorides, which are new building blocks for the synthesis of peptidosulfonamides. In the most crucial step, sulfonic acids or their sodium salts were converted into the corresponding sulfonyl chlorides using an excess of either SOCl₂ or SOCl₂/DMF, and then coupled to the C-protected amino acid. None of the compounds significantly inhibited MurD, however, some inhibited MurE; one had an IC₅₀ below 200 μM, which constitutes a promising starting point for further development. Molecular modelling simulations were performed on two analogues to investigate the absence of inhibitory activity of the sulfonamide compounds on MurD.     

Design and Experimental Characterization of Low‐Volume PM10/2.5/1.0 Trichotomous Sampler Inlet

This paper presents the development and laboratory evaluation of a PM10/2.5/1.0 trichotomous sampling inlet that consists of two main parts: a previously designed PM10 size‐selective inlet part and a PM2.5/1.0 two‐stage virtual impactor, which was newly fabricated and attached serially to the PM10 size selective inlet part. Particles are collected in three locations through the trichotomous sampling inlet to provide for not only particle concentration measurements of PM10, PM2.5 and PM1.0, but also those of PM2.5–10 and PM1.0–2.5.