Synthesis and characterization of a fatty acid self-assembled monolayer on CeO2 nanoparticles: to explore solution-state property of a SAM

Decanoic acid self-assembled monolayer (SAM) in the quasi-crystalline state was prepared on the surface of the cubic CeO₂ nanoparticles (6.5 ± 1.1 nm) by hydrothermal synthesis. The purification method to obtain quasi-crystalline SAM without residual (free) decanoic acid was developed. The SAM was carefully washed (purified) and characterized carefully by FT-IR, TG, DSC, and NMR. The obtained results showed that good agreement with the property of the dry state SAM. The solution state properties of the SAM were also examined by the CeO₂ nanoparticles. It turned out that the quasi-crystalline SAM could be swollen by its good solvents, cyclohexane, and chloroform; however, the quasi-crystalline SAM showed that a size exclusion effect to the solvent, trans-decalin. In addition, it turned out that the molecular motion of the decanoic acids in the SAM was highly restricted even in the swollen state depending on the distance from the grafting point to the CeO₂ surface. The strong osmosis was also observed. The solvent molecules were not easily released from the SAM even after the solvent molecules outside of the SAM were frozen.     

Design variable tolerance effects on the natural frequency variance of constrained multi-body systems in dynamic equilibrium

The design variable tolerance effects on the natural frequency variance of constrained multi-body systems in dynamic equilibrium are investigated in this study. Monte-Carlo simulation is often employed for such investigations, but it is known to have serious drawbacks. Excessive amount of computation time needs to be consumed since a large number of evaluations are usually required for the method. Furthermore, the solution accuracy cannot be always guaranteed in spite of the excessive amount of computation time. In order to overcome such drawbacks, a method employing eigenvalue sensitivity information is proposed to obtain the variance of natural frequency in this study. In order to verify the accuracy and the efficiency of the method, some numerical examples of multi-body systems in dynamic equilibrium are solved and the results are compared to those obtained by an analytical method and Monte-Carlo simulation.     

High‐throughput data dimension reduction via seeded canonical correlation analysis

Canonical correlation analysis (CCA) is one of popular statistical methodologies in multivariate analysis, especially, in studying relation of two sets of variables. However, if sample sizes are smaller than the maximum of the dimensions of two sets of variables, it is not plausible to construct canonical coefficient matrices due to failure of inverting sample covariance matrices. In this article, we develop a two step procedure of CCA implemented in such situation. For this, seeded dimension reduction is adapted into CCA. Numerical studies confirm the approach, and two real data analyses are presented. Copyright © 2014 John Wiley & Sons, Ltd.     

Fast parallel detection of feline panleukopenia virus DNA by multi‐channel microchip electrophoresis with programmed step electric field strength

A multi‐channel microchip electrophoresis using a programmed step electric field strength (PSEFS) method was investigated for fast parallel detection of feline panleukopenia virus (FPV) DNA. An expanded laser beam, a 10× objective lens, and a charge‐coupled device camera were used to simultaneously detect the separations in three parallel channels using laser‐induced fluorescence detection. The parallel separations of a 100‐bp DNA ladder were demonstrated on the system using a sieving gel matrix of 0.5% poly(ethylene oxide) (M_r = 8 000 000) in the individual channels. In addition, the PSEFS method was also applied for faster DNA separation without loss of resolving power. A DNA size marker, FPV DNA sample, and a negative control were simultaneously analyzed with single‐run and one‐step detection. The FPV DNA was clearly distinguished within 30 s, which was more than 100 times faster than with conventional slab gel electrophoresis. The proposed multi‐channel microchip electrophoresis with PSEFS was demonstrated to be a simple and powerful diagnostic method to analyze multiple disease‐related DNA fragments in parallel with high speed, throughput, and accuracy.     

Facile Fabrication of Multi‐targeted and Stable Biochemical SERS Sensors

The direct transfer of single‐crystalline Au nanowires (NWs) onto Au substrates was achieved by a simple attachment and detachment process. In the presence of a lubricant, Au NWs grown vertically on a sapphire substrate were efficiently moved to an Au substrate through van der Waals interactions. We demonstrate that the transferred Au NWs on the Au substrate can act as sensitive, reproducible, and long‐term‐stable surface‐enhanced Raman scattering (SERS) sensors by detecting human α‐thrombin as well as Pb²⁺ and Hg²⁺ ions. These three biochemically and/or environmentally important analytes were successfully detected with high sensitivity and selectivity by Au NW‐SERS sensors bound by a thrombin‐binding aptamer. Furthermore, the as‐prepared sensors remained in working order after being stored under ambient conditions at room temperature for 80 days. Because Au NWs can be routinely transferred onto Au substrates and because the resultant Au NW‐SERS sensors are highly stable and provide with high sensitivity and reproducibility of detection, these sensors hold potential for practical use in biochemical sensing.     

New Cyclization Route to the Skeletons of Lennoxamine and Chilenine

A new cyclization route, triggered by epoxide opening, has been performed to provide the key intermediates for isoindolobenzapine alkaloids, lennoxamine and chilenine. The epoxide was prepared by the Stille reaction using vinyltributylstannane and the following dioxirane treatment. Cyclization under the treatment of BF₃ · OEt₂ provided an azepine moiety, and the oxidative cyclization toward the known precursor for the alkaloids has been achieved by reaction with a stoichiometric amount of Pd(OAc)₂. This formal synthesis suggests a new route to the alkaloids.     

Mild and Efficient Deoxygenation of Sulfoxides with a WCl6/Indium System

Dialkyl, diaryl, and aryl alkyl sulfoxides can be rapidly converted to the corresponding sulfides with a WCl₆/In system in excellent yields under mild conditions.     

Self-assembled discotic nematic liquid crystals formed by simple hydrogen bonding between phenol and pyridine moieties

New discotic nematic liquid crystals have been prepared through intermolecular hydrogen bonding between the core of 1,3,5-trihydroxybenzene (phloroglucinol, PG) or 1,3,5-tris(4-hydroxyphenyl)benzene (THPB) and the peripheral molecules of stilbazole derivatives. The various nematic phases formed by new hydrogen bonding building blocks were investigated by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. The first discotic complexes of PG and trans-4-alkoxy-4′-stilbazoles exhibited nematic columnar (N_C) and hexagonal columnar phases depending on the length of alkyl chains, which were considered as the basic discotic structure. Several structural variations on the building blocks were attempted to examine their effects on the liquid crystalline properties of discotic complexes. The nematic lateral phase (N_L) with enhanced intercolumnar order was observed for the complexes of PG and trans-4-cyanoalkoxy-4′ stilbazoles due probably to the strong dipole interactions between cyano groups at the end of alkoxy chains. By introducing the nonlinear structure in three arms of supramolecular discotic mesogen, a discotic nematic phase (N_D) was observed for the complex of THPB and trans-4-octyloxy-4 -stilbazole. The single hydrogen bonding between phenol and pyridine moieties in this study provides a simple and effective method for preparing the rarely found discotic nematic liquid crystals.     

Enhancement of Enzymatic Hydrolysis and Klason Lignin Removal of Corn Stover Using Photocatalyst-Assisted Ammonia Pretreatment

Photocatalyst-assisted ammonia pretreatment was explored to improve lignin removal of the lignocellulosic biomass for effective sugar conversion. Corn stover was treated with 5.0–12.5 wt.% ammonium hydroxide, two different photocatalysts (TiO₂ and ZnO) in the presence of molecular oxygen in a batch reactor at 60 °C. Various solid-to-liquid ratios (1:20–1:50) were also tested. Ammonia pretreatment assisted by TiO₂-catalyzed photo-degradation removed 70 % of Klason lignin under the optimum condition (12.5 % ammonium hydroxide, 60 °C, 24 h, solid/liquid?=?1:20, photocatalyst/biomass?=?1:10 with oxygen atmosphere). The enzymatic digestibilities of pretreated corn stover were 85 % for glucan and 75 % for xylan with NH₃-TiO₂-treated solid and 82 % for glucan and 77 % for xylan with NH₃-ZnO-treated solid with 15 filter paper units/g-glucan of cellulase and 30 cellobiase units/g-glucan of β-glucosidase, a 2–13 % improvement over ammonia pretreatment alone.