Radioactivity levels in surface water of lakes around Izmir/Turkey

The aim of this study is to determine the radioactivity levels as a baseline for further studies and to obtain the distribution patterns of radioactivity in lake surface water around Izmir/Turkey. In this study, surface water samples were collected from three lakes around Izmir–Turkey. Surface water samples were analyzed for pH, mV conductivity and alkalinity content. The gross alpha/beta and uranium concentrations were investigated in the collected lake water samples. Mean gross alpha and gross beta activity concentrations in the surface water were found to be between (0.03 and 2.62) Bq l⁻¹ for Karagol Lake, (0.75 and 2.35) Bq l⁻¹ for Golcuk Lake, (0.03 and 1.77) Bq l⁻¹ for Cakalbogaz Lake, respectively. Uranium concentration varied between (0.05 and 900) μg l⁻¹ for Karagol Lake, (0.05 and 0.95) μg l⁻¹ for Golcuk Lake and (3.33 and 10) μg l⁻¹ for Cakalbogaz Lake. Radioactivity contour maps were produced and their data were evaluated statistically.     

Trans‐bis(saccharinato)cadmium(II) Complexes with 2‐Aminomethylpyridine and 2‐Aminoethylpyridine — Synthesis,Crystal Structures,Spectral and Thermal Characterization of trans‐[Cd(sac)2(ampy)2] and trans‐[Cd(sac)2(aepy)2]

Two trans‐bis(saccharinato) (sac) complexes of cadmium(II ) with 2‐aminomethylpyridine (ampy) and 2‐aminoethylpyridine (aepy) were synthesized and characterized by means of elemental analysis, FT‐IR spectroscopy and thermal analysis. In addition, their solid‐state structures were determined by single crystal X‐ray diffraction studies. The [Cd(sac)₂(ampy)₂] ( 1 ) and [Cd(sac)₂(aepy)] ( 2 ) complexes consist of neutral monomeric units and crystallize in the orthorhombic (Pbca) and monoclinic (P2₁/c) crystal systems, respectively. The cadmium(II ) ions in 1 and 2 sit on inversion centres andexhibit distorted octahedral coordination by two sac anions and two aminopyridine ligands. The sac ligands in both complexes are N‐coordinated and located in trans positions, while the ampy and aepy ligands act as a bidentate ligand forming two symmetrically chelate rings around cadmium(II ). IR spectra and thermal decompositions of the complexes are also discussed.     

Comparative evaluation of antioxidant capacities of thiol-based antioxidants measured by different in vitro methods

Thiol-type compounds are an important class of strong antioxidants and main determinants of total antioxidant capacity (TAC) of cellular homogenates. The TAC of thiol mixtures and the corresponding TEAC (trolox equivalent antioxidant capacity) values of individual thiols were determined by the CUPRAC (CUPric Reducing Antioxidant Capacity) method, and the results were compared with those found by reference assays for method validation. Synthetic mixtures of thiols were prepared, and the expected and found TAC values (in mM trolox (TR) equivalents) of these mixtures showed a good agreement. The technique of standard additions was performed for thiol mixtures and human serum, and the absorbance results confirmed that apparent chemical deviations from Beer's law were absent in the system. The CUPRAC results were compared with those of reference methods, namely 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS)/persulphate and Ferric Reducing Antioxidant Power (FRAP). As being a most important thiol (-SH) peptide at in vivo conditions, glutathione (GSH) showed a TEAC value of 0.57 in the CUPRAC method, as opposed to the corresponding value (1.51) in the ABTS/persulphate method. The ABTS/persulphate result was not in accordance with the reversible 1-e oxidation of GSH to the corresponding disulfide that is expected to occur under physiological conditions. FRAP did not give consistent results, and even at relatively high concentrations of GSH, the TEAC_FRAP value was only 0.07. The thiol-type antioxidant-bearing pharmaceuticals of Brunac eye drop, Trom and Mentopin effervescent tablets containing N-acetyl-l-cysteine (NAC) were assayed with HPLC for comparison, and the obtained results for NAC were in accordance with those found with CUPRAC.     

Combined computational and experimental study on the inclusion complexes of β-cyclodextrin with selected food phenolic compounds

Phenolic compounds, such as caffeic acid, trans-ferulic, acid and p-coumaric acid that are commonly found in food products, are beneficial for human health. Cyclodextrins can form inclusion complexes with various organic compounds in which the physiochemical properties of the included organic molecules are changed. In this study, inclusion complexes of three phenolic compounds with β-cyclodextrin were investigated. The complexes were characterized by various analytical methods, including nuclear magnetic resonance (NMR) spectroscopy, Fourier IR (FT-IR) spectroscopy, mass spectrometry, differential scanning calorimetry, and scanning electron microscopy. Results showed that the phenolic compounds used in this study were able to form inclusion complexes in the hydrophobic cavity of β-cyclodextrin by non-covalent bonds. Their physicochemical properties were changed due to the complex formation. In addition, a computational study was performed to find factors that were responsible for binding forces between flavors and β-cyclodextrin. The quantum-mechanical calculations supported the results obtained from experimental studies. Thus, ΔH_f for the complex of p-coumaric acid and β-cyclodextrin has been found as ??11.72 kcal/mol, which was about 3 kcal/mol more stable than for inclusion complexes of other flavors. Energies of frontier orbitals (higher occupied molecular orbital (HOMO) and lower unoccupied molecular orbital (LUMO)) were analyzed, and it was found that H-L gap for the complex of p-coumaric acid and β-cyclodextrin had the largest value (8.19 eV) in comparison to other complexes, which confirmed the experimental findings of the most stabile complex.

     

Electrochemical Evaluation of Titanium (IV) Oxide/Polyacrylonitrile Electrospun Discharged Battery Coals as Supercapacitor Electrodes

The TiO₂ nanoparticles are electrospun with polyacrylonitrile (PAN) polymer solution onto the discharged battery coal (DBC) electrode and the results are evaluated as a supercapacitor. The morphology and chemical composition of the synthesized TiO₂ nanoparticles and PAN+TiO₂ nanocomposite fibers were characterized by Scanning electron microscopy, thermogravimetry and FTIR analysis. Supercapacitor measurements and electrochemical characterizations of the electrodes examined by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical measurements showed that the best current value was obtained from PAN and TiO₂ coated DBC. The performances of both PAN and PAN+TiO₂ coated DBC electrodes were investigated as supercapacitors. PAN+TiO₂/DBC showed the best specific capacitance value of 156.00 F g⁻¹ and PAN/DBC showed 74.93 F g⁻¹. In addition, PAN+TiO₂/DBC exhibited reliable stability performance over 2000.00 cycles.     

Assessment of different hazard indices around coal-fired power plants in Turkey

Journal of Radioanalytical and Nuclear Chemistry - This paper presents the radiological and heavy metal risk assessment to evaluate the impact of coal-fired power plants on humans and the...     

Functionalization of poly-SNS-anchored carboxylic acid with Lys and PAMAM: surface modifications for biomolecule immobilization/stabilization and bio-sensing applications

Poly(2-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl) (SNS) acetic acid) was electrochemically deposited on graphite electrodes and functionalized with lysine (Lys) amino acid and poly(amidoamine) derivatives (PAMAM?G2 and PAMAM?G4) to investigate their matrix properties for biosensor applications. Glucose oxidase (GOx) was immobilized onto the modified surface as the model enzyme. X-Ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) were used to report the surface properties of the matrices in each step of the biosensor construction. The biosensors were characterized in terms of their operational and storage stabilities and the kinetic parameters (K and I(max)). Three new glucose biosensors revealed good stability, featuring low detection limits (19.0 μM, 3.47 μM and 2.93 μM for lysine-, PAMAM?G2- and PAMAM?G4-functionalized electrodes, respectively) and prolonged the shelf lives (4, 5, and 6 weeks for Lys-, PAMAM?G2- and PAMAM?G4-modified electrodes, respectively). The proposed biosensors were tested for glucose detection on real human blood serum samples.     

Synthesis of PDE IVb Inhibitors. 3. Synthesis of (+)-, (-)-, and (±)-7-[3-(cyclopentyloxy)-4-methoxyphenyl]hexahydro-3H-pyrrolizin-3-one via reductive domino transformations of 3-β-carbomethoxyethyl-substituted six-membered cyclic nitronates

Simple three-step asymmetric and racemic syntheses of GlaxoSmithKline's highly potent PDE IVb inhibitor 1 were developed. The suggested approach is based on reductive domino transformations of 3-β-carbomethoxyethyl-substituted six-membered cyclic nitronates, which are easily accessed by a stereoselective [4 + 2] cycloaddition of an appropriate nitroalkene to vinyl ethers. In vitro studies of PDE IVb inhibition by enantiomeric pyrrolizidinones (+)-1 and (-)-1 were performed.     

Entrapment of Lentinus sajor-caju into Ca-alginate gel beads for removal of Cd(II) ions from aqueous solution: preparation and biosorption kinetics analysis

A white rot fungus species Lentinus sajor-caju biomass was entrapped into alginate gel via a liquid curing method in the presence of Ca(II) ions. The biosorption of cadmium(II) by the entrapped live and dead fungal biomass has been studied in a batch system. The heat-treatment process enhanced the biosorption capacity of the immobilized fungal biomass. The effect of initial cadmium concentration, pH and temperature on cadmium removal has been investigated. The maximum experimental biosorption capacities for entrapped live and dead fungal mycelia of L. sajur-caju were found to be 104.8±2.7 mg Cd(II) g⁻¹ and 123.5±4.3 mg Cd(II) g⁻¹, respectively. The kinetics of cadmium biosorption was fast, approximately 85% of biosorption taking place within 30 min. The biosorption equilibrium was well described by Langmuir and Freundlich adsorption isotherms. The change in the biosorption capacity with time is found to fit pseudo-second-order equations. Cadmium binding properties of entrapped fungal preparations have been determined applying the Ruzic equations. Since the biosorption capacities are relatively high for both entrapped live and dead forms, they could be considered as suitable biosorbents for the removal of cadmium in wastewater treatment systems. The biosorbents were reused in three consecutive adsorption/desorption cycles without significant loss in the biosorption capacity.