A New Chemometric Strategy in Electrochemical Method Optimization for the Quantification of Cefdinir in Tablets,Effervescent Tablets and Suspension Samples

A new voltammetric method, based on the use of single‐use pencil graphite electrode, was developed for the quantitative determination of cefdinir by square wave voltammetry. Chemometric optimization strategy was used to select the suitable values for three experimental parameters (pH of the supporting electrolyte, frequency and square wave amplitude) by applying a 3³ full factorial design model. The optimal voltammetric conditions were found to be pH 5.0 for supporting electrolyte (Britton‐Robinson buffer), 43 mV for square wave amplitude and 108 Hz for frequency. Square wave voltammograms of calibration, validation and unknown samples were recorded between 0.0–1400 mV under the optimized voltammetric conditions. Linear regression equation was computed in the linear working range of 0.5–20 μg/mL by using the relationship between the concentration and peak current at 600 mV. The optimized voltammetric method was validated by assessing the analysis results of validation samples. Then the proposed method was applied for the quantitative determination of cefdinir in three different pharmaceutical preparations, namely film‐coated tablets, effervescent tablets and powder for oral suspension. It was concluded that the proposed voltammetric method was suitable for the quantitative analysis of commercial pharmaceutical preparations containing cefdinir.     

Semigroups of order 8

We construct all non-equivalent semigroups of order 8, obtain their total number, and specify commutative semigroups, regular semigroups and inverse semigroups among them. And we present their classification with respect to the equivalences of the Green’s relations, that is, egg-box types with information about the positions of idempotent elements in them.     

Computational Methods for MOF/Polymer Membranes

Metal–organic framework (MOF)/polymer mixed matrix membranes (MMMs) have received significant interest in the last decade. MOFs are incorporated into polymers to make MMMs that exhibit improved gas permeability and selectivity compared with pure polymer membranes. The fundamental challenge in this area is to choose the appropriate MOF/polymer combinations for a gas separation of interest. Even if a single polymer is considered, there are thousands of MOFs that could potentially be used as fillers in MMMs. As a result, there has been a large demand for computational studies that can accurately predict the gas separation performance of MOF/polymer MMMs prior to experiments. We have developed computational approaches to assess gas separation potentials of MOF/polymer MMMs and used them to identify the most promising MOF/polymer pairs. In this Personal Account, we aim to provide a critical overview of current computational methods for modeling MOF/polymer MMMs. We give our perspective on the background, successes, and failures that led to developments in this area and discuss the opportunities and challenges of using computational methods for MOF/polymer MMMs.     

Functionalized phosphorus analogues of the beta-diketiminato ligand systems: bis(N-arylphosphinimino)acetonitrile-derived complexes of rhodium and iridium

Staudinger reaction of dppm-CN (5) gave the corresponding bis(N-phenylphosphinimino)acetonitrile system (6). Deprotonation with LDA furnished the corresponding anionic ligand 9. Its reaction with [(CO)(2)RhCl](2) gave the corresponding kappa(2)N,N'-chelate complex 11. X-Ray diffraction revealed a non-planar boat-like conformation of the six-membered chelate ring in the crystal. Treatment of 9 with [(nbd)RhCl](2) gave the six-membered chelate complex 12 which features a different twist-like structure in the solid state, as does 13, which was formed by reacting 9 with [(cod)IrCl](2).     

Multi-residue determination of organochlorine pesticides in vegetables in Kirklareli,Turkey by gas chromatography–mass spectrometry

The aim of this study was to investigate the level of organochlorine pesticides use for treatment of tomatoes, eggplants and cucumbers in Kirklareli, Turkey. Eighteen organochlorine pesticides were identified in vegetable samples using microwave or Soxhlet extraction, and results were obtained by gas chromatography–mass spectrometry. The optimized conditions were 1 mL/min for flow rate in the mobile phase, 1 μL for injection volume and 70 V for fragmentation potential. The analytical parameters show that the microwave oven extraction procedure provided the best results when compared to the Soxhlet extraction procedure. Samples were prepared for analysis with hexane?dichlormethane (1: 1, v/v, 40 mL) using a solid-phase extraction method. The limits of detection and quantitation for the eighteen analytes were between 0.02–0.26 and 0.06–0.87 μg/L, respectively, and the relative standard deviations of the migration time ranged from 2.4 to 8.9%. The recoveries of surrogate spiked in vegetable samples ranged from 70 to 116%, respectively. The obtained concentrations of pesticides in all vegetables studied were proved in the range of ND–123 μg/kg. The organochlorine pesticide sum was below the legal limit, except for Endrin and Methoxychlor, which requires a further elucidation of the organochlorine pesticides pollution sources in the region. These studies on accumulation of organochlorine pesticides were necessary for accomplishing a comprehensive ecological risk assessment.     

Synthesis,Crystal Structure and Thermal Properties of <Emphasis Type="Italic">N</Emphasis>-Acetyl-3-(2-furyl)-5-ferrocenyl-2-pyrazoline and <Emphasis Type="Italic">N</Emphasis>-Acetyl-3-(2-thienyl)-5-ferrocenyl-2-pyrazoline

Abstract  

Two novel ferrocenyl substituted N-acetyl-2-pyrazolines, N-acetyl-3-(2-furyl)-5-ferrocenyl-2-pyrazoline (3) and N-acetyl-3-(2-thienyl)-5-ferrocenyl-2-pyrazoline (4), have been synthesized and characterized by FTIR, ¹H-NMR, ¹³C-NMR techniques, elemental analysis and X-ray structure analysis. Thermal properties of these compounds have been determined by TGA, DTA and DSC analysis. Compound 3 (C₁₉H₁₈N₂O₂Fe) crystallizes in the monoclinic space group P21/c and Z = 4, with a = 8.6970(4) ?, b = 18.4725(9) ?, c = 11.0041(5) ?, β = 110.942(3)°. Compound 4 (C₁₉H₁₈N₂OSFe) crystallizes in the orthorhombic space group Fdd2 and Z = 16, with a = 84.242(2) ?, b = 13.5416(5) ?, c = 5.9405(2) ?, β = 90°. In terms of crystal packing, each compound shows different molecular arrangement, which are stabilized by C–H···O intermolecular weak hydrogen bonds, and/or C–H···π interactions.     

Benzophenone based addition fragmentation agent for photoinitiated cationic polymerization

Photoactive allyl ammonium salt (BPEA) containing benzophenone moiety in the structure was synthesized and characterized. Its capability to act as a self-initiating addition fragmentation agent in the photoinitiated cationic polymerization of oxiranes such as cyclohexene oxide and vinyl monomers such as butylvinyl ether was investigated. These monomers turned out to be polymerizable in the presence of BPEA provided free radicals are generated photochemically at λ>300 nm by hydrogen abstraction of excited benzophenone moiety. Accordingly, a free radical adds to the carbon-carbon double bond of a ground state BPEA and fragmentation of the adduct radical results in the formation of reactive ammonium radical cation which is essentially responsible for the initiation.     

Hexa-BODIPY Linked-Triazole Based on a Cyclotriphosphazene Core as a Highly Selective and Sensitive Fluorescent Sensor for Fe<Superscript>2+</Superscript> Ions

A new type of fluorescent chemosensor based on tethered hexa-borondipyrromethene cyclotriphosphazene platform (HBTC) linked via triazole groups was designed and synthesized. Its sensing behavior toward metal ions was investigated by ultraviolet-visible and fluorescence spectroscopies. Addition of a Fe²⁺ ion to a tetrahydrofuran solution of HBTC gave a visual color change as well as a significantly quenched fluorescence emission, while other tested 19 metal ions induced no color or spectral changes. This compound was found to be highly selective and sensitive for Fe²⁺ with a low limit of detection (2.03 μM) which is, to the best of our knowledge, the superior than the previously studied chemosensors for Fe²⁺.

Open image in new window

Graphical Abstract ?