Optimization Condition for Thin-Layer Identification of Bronzes after Anodic Sampling

JPC – Journal of Planar Chromatography – Modern TLC - Qualitative identification of Cu, Sn, Pb, Ni, and Fe in Cu-alloys is presented. The method involves anodic sampling of alloys,...     

XANES speciation of mercury in three mining districts – Almadén,Asturias (Spain), Idria (Slovenia)

The mobility, bioavailability and toxicity of mercury in the environment strongly depend on the chemical species in which it is present in soil, sediments, water or air. In mining districts, differences in mobility and bioavailability of mercury mainly arise from the different type of mineralization and ore processing. In this work, synchrotron‐based X‐ray absorption near‐edge spectroscopy (XANES) has been taken advantage of to study the speciation of mercury in geological samples from three of the largest European mercury mining districts: Almadén (Spain), Idria (Slovenia) and Asturias (Spain). XANES has been complemented with a single extraction protocol for the determination of Hg mobility. Ore, calcines, dump material, soil, sediment and suspended particles from the three sites have been considered in the study. In the three sites, rather insoluble sulfide compounds (cinnabar and metacinnabar) were found to predominate. Minor amounts of more soluble mercury compounds (chlorides and sulfates) were also identified in some samples. Single extraction procedures have put forward a strong dependence of the mobility with the concentration of chlorides and sulfates. Differences in efficiency of roasting furnaces from the three sites have been found.     

A methodological study of mercury speciation using dogfish liver CRM (DOLT-2)

The purpose of the study was to optimise analytical methods for determination of the chemical speciation of mercury in studies of protective mechanisms of selenium. Optimisation of the methods was performed using CRM DOLT-2 (Dogfish liver), both in its original form and after separation of various fractions. The sample was homogenised with 10 mM Tris-HCl buffer (pH 7.6) and ultracentrifuged. The soluble phase obtained was applied to a size exclusion chromatography column (Sephadex G-75 column) for separation of various protein fractions. Total mercury (total Hg), monomethyl mercury (MeHg) and selenium (Se) were determined in whole dogfish liver tissue and its soluble and insoluble phases (pellet). Different approaches for determination of total Hg and MeHg were compared. Simultaneous determination of MeHg and inorganic mercury (Hg2+) was based on alkaline dissolution and/or acid leaching, followed by ethylation, room temperature precollection, isothermal gas chromatography (GC), pyrolysis and detection with cold vapour atomic fluorescence spectrometry (CVAFS). The sum of MeHg and Hg2+ was compared to total Hg results obtained by acid digestion and CVAAS detection. The accuracy of MeHg determination was checked by its determination using acid leaching at room temperature, solvent extraction, back extraction into Milli-Q water, ethylation, GC and CVAFS detection. For the insoluble phase it is recommended to use solvent extraction for MeHg and acid digestion CVAAS for total Hg. For determination of MeHg and Hg2+ in the lyophilised sample and water soluble fractions containing low concentrations of mercury species, the simultaneous measurement of MeHg and Hg2+ after alkaline dissolution is the most appropriate method.     

ATPases as Multi-Response Sensing System for Various Organic and Inorganic Analytes

Summary. The possibility of using synaptic plasma membrane (SPM) enzymes Na⁺/K⁺-ATPase and Mg²⁺-ATPase, isolated from rat brain, as a biological component of multi-response sensing system for detection of different compounds (alkaline and heavy metal salts, organic compounds) was studied. The method is based on the spectrophotometric determination of inorganic ortho-phosphate (P_i) that serves as a measure of the enzymatic activity in the presence of various analytes. The concentration of P_i, liberated by enzyme catalysed hydrolysis of adenosinetriphosphate (ATP), was followed spectrophotometrically, by single exposure to analytes or in the mixture. P_i was dose dependent on the analyte concentration. Alkaline elements (Na, K, Mg), heavy metals (Pb, Cd, Hg, Cu, Fe, Co, Zn), toxic organic compounds (pyridine, urea, chlorpyrifos), and some drugs (digoxin, gitoxin) showed diverse effects, inducing the inhibition or stimulation of the enzymes activity. Development of simple test method for simultaneous detection of the investigated analytes based on the variation of medium assay composition was discussed.     

The μ-dependence of the effective weak Hamiltonian andK→2π amplitudes in chiral-bag model

This paper studies the μ-dependence of the operator matrix elements. Although the μ-dependence must in principle cancel as illustrated in the paper by using a simple pedagogical model, in practice the choice of μ markedly influences the theoretical predictions forK→2π decays.     

Development and optimization of the SPE procedure for determination of pharmaceuticals in water samples by HPLC‐diode array detection

This paper focuses on the investigation of different types of SPE sorbents for the preconcentration of eight veterinary pharmaceuticals from water samples. The pharmaceuticals studied were sulfamethazine, sulfadiazine, sulfaguanidine, trimethoprim, oxytetracycline, enrofloxacin, norfloxacin and penicillin G/procaine. Five different SPE materials (Strata‐X, Strata‐X‐C, Strata SDB‐L, Strata C8 and Strata C18) from Phenomenex were compared with Oasis HLB with a view to obtaining the best cartridges for all pharmaceuticals investigated. Extraction efficiency was determined by HPLC with diode array detection (DAD). HPLC‐DAD separation and quantification of the selected pharmaceuticals were carried out under gradient elution by a binary mixture of 0.01 M oxalic acid and ACN based on cyano modified column (LiChrosphere 100 CN) from Merck. Strata‐X provided the best results in the preconcentration of 100 mL water samples, yielding average pharmaceutical recoveries of higher than 90%, except for sulfaguanidine (76.1%). The developed Strata‐X‐HLPC‐DAD method was validated and applied, for the efficient investigation of reverse osmosis/nanofiltration membranes and for the removal of these eight pharmaceuticals from the production wastewater samples. NF90 and XLE membranes were shown to be the best for the rejection of all investigated pharmaceuticals.     

Certification of trace and major elements and methylmercury concentrations in a macroalgae (Fucus sp.) reference material, IAEA-140

A marine reference material, IAEA-140, prepared with a macroalgae (Fucus sp.) was recently produced by the International Atomic Energy Agency and certified for trace and major elements and for methylmercury (MeHg). Certification of this material was achieved as an outcome of an international analytical intercomparison study which resulted in 116 independent sets of results reported by participants from 54 countries. The statistical evaluation of the collected data and the criteria used for assignment of the mean and uncertainty values are described. The analysis of data allowed to certify concentration values for 24 elements and MeHg, and to provide information values for another 10 elements. Regarding the elements which could be given certified values, between two and eight different instrumental methods were used to measure metal concentrations, and four independent analytical procedures were used to measure MeHg concentrations. In order to assess the results of the certification procedure, a comparison was made between the certified values obtained from the world-wide intercomparison results and the values obtained from a small subgroup of well-qualified laboratories. The means and 95% confidence intervals for reference values obtained by the two methods are similar for most elements showing that the usual method of certification used by the IAEA, based on large groups of participants, is indeed pertinent.     

Anodic Sampling and TLC Identification of Dental Alloys

JPC – Journal of Planar Chromatography – Modern TLC - Knowledge of the composition of an incorporated alloy is a precondition for avoiding polymetallism in subsequent prosthetic...     

Construction of a New Class of Tetracycline Lead Structures with Potent Antibacterial Activity through Biosynthetic Engineering

Antimicrobial resistance and the shortage of novel antibiotics have led to an urgent need for new antibacterial drug leads. Several existing natural product scaffolds (including chelocardins) have not been developed because their suboptimal pharmacological properties could not be addressed at the time. It is demonstrated here that reviving such compounds through the application of biosynthetic engineering can deliver novel drug candidates. Through a rational approach, the carboxamido moiety of tetracyclines (an important structural feature for their bioactivity) was introduced into the chelocardins, which are atypical tetracyclines with an unknown mode of action. A broad‐spectrum antibiotic lead was generated with significantly improved activity, including against all Gram‐negative pathogens of the ESKAPE panel. Since the lead structure is also amenable to further chemical modification, it is a platform for further development through medicinal chemistry and genetic engineering.     

DFT study of gas-phase adsorption of benzotriazole on Cu(111), Cu(100), Cu(110), and low coordinated defects thereon

The adsorption of benzotriazole--an outstanding corrosion inhibitor for copper--on Cu(111), Cu(100), Cu(110), and low coordinated defects thereon has been studied and characterized using density functional theory (DFT) calculations. We find that benzotriazole can either chemisorb in an upright geometry or physisorb with the molecular plane being nearly parallel to the surface. While the magnitude of chemisorption energy increases as passing from densely packed Cu(111) to more open surfaces and low coordinated defects, the physisorption energy is instead rather similar on all three low Miller index surfaces. It is pointed out that due to a large dipole moment of benzotriazole the dipole-dipole interactions are rather important. For perpendicular chemisorption modes the lateral repulsion is very long ranged, extending up to the nearest-neighbor distance of about 60 bohrs, whereas for parallel adsorption modes the lateral interactions are far less pronounced and the molecules experience a weak attraction at distances ?25 bohrs. The chemisorption energies were therefore extrapolated to zero coverage by a recently developed scheme and the resulting values are -0.60, -0.73, and -0.92 eV for Cu(111), Cu(100), and Cu(110), respectively, whereas the zero-coverage physisorption energy is about -0.7 eV irrespective of the surface plane. While the more densely packed surfaces are not reactive enough to interact with the molecular π-system, the reactivity of Cu(110) appears to be at the onset of such interaction, resulting in a very stable parallel adsorption structure with an adsorption energy of -1.3 eV that is ascribed as an apparent chemisorption+physisorption mode.