Highly active/selective and adjustable zirconium polymerization catalysts stabilized by aminopyridinato ligands

This paper describes a substantial enhancement of the aminopyridinato ligand stabilized early transition metal chemistry by introducing the sterically very demanding 2,6-dialkylphenyl substituted aminopyridinato ligands derived from (2,6-diisopropylphenyl)-[6-(2,6-dimethylphenyl)-pyridin-2-yl]-amine (1a-H, ApH) and (2,6-diisopropylphenyl)-[6-(2,4,6-triisopropylphenyl)-pyridin-2-yl]- amine (1b-H, Ap^∗H). The corresponding bis aminopyridinato zirconium dichloro complexes, [Ap₂ZrCl₂] (3a) and [Ap₂^∗ZrCl₂] (3b) and the dimethyl analogues, [Ap₂ZrMe₂] (4a) and [Ap₂^∗ZrMe₂] (4b) (Me = methyl) were synthesized, using standard salt metathesis routes. Single-crystal X-ray diffraction was carried out for the dichloro derivatives. Both zirconium metal centers have a distorted octahedral environment with a cis-orientation of the chloride ligands in 3a and a closer to trans-arrangement in 3b. The dimethyl derivatives are proven to be highly active ethylene polymerization catalysts after activation with [R₂N(Me)H][B(C₆F₅)₄] (R = C₁₆H₃₃-C₁₈H₃₇). During attempted co-polymerizations of α-olefins (propylene) and ethylene high activity and selectivity for ethylene and nearly no co-monomer incorporation was observed. Increasing the steric bulk of the ligand going from (2,6-dimethylphenyl) to (2,4,6-triisopropylphenyl) substituted pyridines, switches the catalyst system from producing long chain α-olefins to polymerization of ethylene in a living fashion. In contrast to the dimethyl complexes only [Ap₂^∗ZrCl₂] in the presence of MAO at elevated temperature gave decent polymerization activity. NMR investigations of the reaction of dichloro complexes with 25 equiv. of MAO or AlMe₃ at room temperature revealed, that [Ap₂ZrCl₂] decomposes under ligand transfer to aluminum and formation of [ApAlMe₂], while [Ap₂^∗ZrCl₂] remains almost unreacted under the same conditions. The aminopyridinato dimethyl aluminum complexes, [ApAlMe₂] (5a) and [Ap^∗AlMe₂] (5b) were synthesized independently and structurally characterized. The aluminum complexes 5a and b show no catalytic activity towards ethylene, when “activated” with[R₂N(Me)H][B(C₆F₅)₄].     

Carbonylative ring opening of terminal epoxides at atmospheric pressure

The carbonylative opening of terminal epoxides under mild conditions has been developed using Co2(CO)8 as the catalyst. Under 1 atm of carbon monoxide and at room temperature in methanol, propylene oxide is converted to methyl 3-hydroxybutanoate in up to 89% yield. This transformation is general for many terminal epoxides bearing alkyl, alkenyl, aryl, alkoxy, chloromethyl, phthalimido, and acetal functional groups. The opening takes place without epimerization at the secondary stereocenter.     

Trisannulated benzene derivatives by Acid catalyzed aldol cyclotrimerizations of cyclic ketones. Methodology development and mechanistic insight

Several factors that contribute to the success of aldol cyclotrimerizations have been clarified as part of an effort to shed light on the inner workings of this century old reaction. The use of 4,7-di-tert-butylacenaphthenone (11) as a mechanistic probe molecule has led to intriguing discoveries about temperature, solvent, and solubility effects. Solvents that are both polarizable and somewhat polar, e.g., o-dichlorobenzene (ODCB), work best for the aromatic ketones examined. Certain Br?nsted acids were found to work better than Lewis acids as catalysts for the archetypal aldol cyclotrimerization of indanone (2) in aprotic solvents, and a strong dependence on the pKa of the acid was observed. A standardized protocol, using p-toluenesulfonic acid monohydrate, is shown to work well in a number of test cases.     

Disubstituted pyridines: the double-coupling approach

A one-pot procedure leading to disubstituted pyridines from the starting dibromopyridines is described. Key features include the ability to couple a range of aryl and even alkenylboronic acids at the 2,3 and/or 2,5 positions with excellent regiocontrol under a standard set of conditions. Further, isolated yields are greatly improved by the use of neutral alumina in place of silica for product purification. Finally, the intrinsic electronic bias of the pyridine ring can be overcome by using a bromoiodopyridine.     

Surface characterizations of spin-coated films of ethylcellulose and hydroxypropyl methylcellulose blends

Films of pure ethylcellulose (EC) and hydroxypropyl methylcellulose (HPMC) polymers and EC/HPMC blends were prepared from solutions by spin coating where isopropyl alcohol (IPA), water, and IPA/water cosolvent were used as solvents. Surface structures of the films were investigated using optical microscopy, atomic force microscopy (AFM), and Raman mapping and spectroscopy. For the films prepared from EC/HPMC blend solutions using the IPA/water cosolvent, different domain structures such as islands or pits and phase separation between EC and HPMC were observed by optical microscopy and AFM. The nature of the polymer components on the surface of the films was identified by Raman mapping and spectroscopy. Experimental results also indicated that polymer composition, solvent, and temperature during spin coating had significant impacts on surface structures of the films.     

Preparation and characterization of poly(lipid)-coated, fluorophore-doped silica nanoparticles for biolabeling and cellular imaging

The fabrication, characterization, and implementation of poly(lipid)-coated, highly luminescent silica nanoparticles as fluorescent probes for labeling of cultured cells are described. The core of the probe is a sol-gel-derived silica nanoparticle, 65-100 nm in diameter, in which up to several thousand dye molecules are encapsulated (Lian, W.; et al. Anal. Biochem. 2004, 334, 135-144). The core is coated with a membrane composed of bis-sorbylphosphatidylcholine, a synthetic polymerizable lipid that is chemically cross-linked to enhance the environmental and chemical stability of the membrane relative to a fluid lipid membrane. The poly(lipid) coating has two major functions: (i) to reduce nonspecific interactions, based on the inherently biocompatible properties of the phosphorylcholine headgroup, and (ii) to permit functionalization of the particle, by doping the coating with lipids bearing chemically reactive or bioactive headgroups. Both functions are demonstrated: (i) Nonspecific adsorption of dissolved proteins to bare silica nanoparticles and of bare nanoparticles to cultured cells is significantly reduced by application of the poly(lipid) coating. (ii) Functionalization of poly(lipid)-coated nanoparticles with a biotin-conjugated lipid creates a probe that can be used to target both dissolved protein receptors as well as receptors on the membranes of cultured cells. Measurements performed on single nanoparticles bound to planar supported lipid bilayers verify that the emission intensity of these probes is significantly greater than that of single protein molecules labeled with several fluorophores.     

Solvent dependent friction force response of polystyrene brushes prepared by surface initiated polymerization

Polystyrene (PS) brushes were prepared on oxide passivated silicon by the surface initiated polymerization (SIP) technique. From an AIBN-type free radical initiator, which was silanized and immobilized on silicon wafers, styrene brushes were directly polymerized and grafted from the surface. The formation of the initiator monolayer and, subsequently, the polymer brush on the surface were monitored by X-ray photoelectron spectroscopy (XPS) and ellipsometry. Friction force measurements were performed by atomic force microscopy (AFM), using a 5 microm SiO2 colloidal sphere tip and under systematically varied solvent environments (nonpolar to polar), to demonstrate the dependence of brush lubricity on solvation. The relative uptake of solvents in the PS brush was determined by quartz crystal microbalance (QCM), and it correlates well with friction data. It is surmised that, in poor solvent environments, the polymer brush exists in a collapsed conformation, giving rise to the higher observed friction response.     

Frequency dependence of gold nanoparticle superassembly by dielectrophoresis

Dielectrophoresis is an effective method for capturing nanoparticles and assembling them into nanostructures. The frequency of the dielectrophoretic alternating current (ac) electric field greatly influences the morphology of resultant nanoparticle assemblies. In this study, frequency regimes associated with specific gold nanoparticle assembly morphologies were identified. Gold nanoparticles suspended in water were captured by microelectrodes at different electric field frequencies onto thin silicon nitride membranes. The resultant assemblies were examined by transmission electron microscopy. For this system, the major frequency-dependent influence on morphology appears to arise not from the Clausius-Mossotti factor of the dielectrophoretic force itself, but instead from ac electroosmotic fluid flow and the influence of the electrical double layer at the electrode-solution interface. Frequency regimes of technological interest include those forming one-dimensional nanoparticle chains, microwires, combinations of microwires and nanoparticle chains suitable for nanogap electrode formation, and dense three-dimensional assemblies with very high surface area.     

Rapid proton-coupled electron-transfer of hydroquinone through phenylenevinylene bridges

We describe the synthesis of two oligo(phenylene vinylene)s (OPVs) with a hydroquinone moiety and a thiol anchor group: 4-(2',5'-dihydroxystyryl)benzyl thioacetate and 4-[4'-(2' ',5' '-dihydroxystyryl)styryl]benzyl thioacetate. Monolayers on gold of these molecules were examined by electrochemical techniques to determine the electron transfer kinetics of the hydroquinone functionality (H2Q) through these delocalized tethers ("molecular wires") as a function of pH. Between pH 4 and 9, rate constants were ca. 100-fold faster than for the same H2Q functionality confined to the surface via alkane tethers. Also, in this same pH range rate constants were independent of the length of the OPV bridge. These new electroactive molecules in which the hydroquinone functionality is wired to the gold surface by means of OPV tethers should be useful platforms for constructing bioelectronic devices such as biosensors, biofuel cells, and biophotovoltaic cells with a fast response time.     

Stable analogs of the uranyl ion containing 1,1,3,3-tetramethylguanidine

The reaction of 1,1,3,3-tetramethylguanidine (HTMG) with [UO(2)Cl(2)(THF)2] yielded [UO(2)Cl(2)(HTMG)2] 1, the first uranyl tetralkylguanidine adduct reported, further investigation led to the synthesis of [UO(2)(DBP)2(HTMG)2] 2 and [UO(2)(DBP-4-Me)2(HTMG)2] 3 via the reaction of [UO(2){N(SiMe(3))2}2(THF)2] with HTMG and the appropriate aryl alcohol, HO-2,6-(t)Bu(2)-4-RC(6)H(2) (R = H, DBP; R = CH(3), DBP-4-Me).