Nanoemulsions for the Determination of the Antioxidant Capacity of Oils by an Electrochemical Method

The paper describes a rapid and simple method for the evaluation of the antioxidant capacity in oil in water nanoemulsion. This procedure does not require extensive sample treatment and, most important, does not use any organic solvent for dissolution of the fatty matrix. The nanoemulsions were directly injected in a flow injection (FI) system with an electrochemical detector equipped with a glassy carbon working electrode operating amperometrically at a potential of +0.8 V (vs. Ag/AgCl). Results obtained were compared with those obtained by the Oxygen Radical Absorbance Capacity (ORAC) assay.     

Inorganic by-products in waters disinfected with chlorine dioxide

The continuing diminishing sources of fresh waters has stimulated the search for unconventional water resources, such as effluents from municipal sewage treatment plants, which can be reused for purposes of irrigation in agriculture, cooling water in industry, groundwater aquifer recharge and in the long term even for drinking water. The main problem of using effluents is the presence of pathogenic bacteria and viruses that can affect human and animal health. Therefore, disinfection has been used for many years to control and reduce waterborne diseases.At the moment, most water treatment plants use sodium hypochlorite as their primary biocide. However, the toxicity of chlorinated organic compounds produced during the treatment has led to increased interest in the use of alternative agents. One possible candidate as viable substitute of free chlorine is chlorine dioxide. Before this disinfectant can be recommended for routine use, it is imperative that its safety be assessed.In this research we have investigated the presence of chlorite and chlorate in sewage disinfected with chlorine dioxide. The effect of initial concentration of biocide and contact time was evaluated using a pilot plant fed with the effluent of a municipal treatment plant. Moreover, the influence of ClO₂ generator performance was analyzed and discussed.     

A method for routine quantitation of urinary 8-hydroxy-2'-deoxyguanosine based on solid-phase extraction and micro-high-performance liquid chromatography/electrospray ionization tandem mass spectrometry

8-Hydroxy-2'-deoxyguanosine (8OHdG), one of the major oxidative DNA lesions induced by radical agents, is commonly used as a biomarker for oxidative stress, nowadays preferably in urine. In the absence of a commercially available internal standard a micro-high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (micro-HPLC/ESI-MS/MS) method, suitable for routine analysis of 8OHdG in human urine using external calibration, was developed. Evaluation of the matrix effect showed that the method allows highly sensitive and accurate quantitation despite the absence of an internal standard. HPLC analysis was performed using gradient elution at a flow rate of 10 microL min(-1) using a capillary reversed-phase column and an injection volume of 0.5 microL, with detection of 8OHdG in positive multiple reaction monitoring (MRM) mode. The absolute limit of detection was 0.35 fmol using m/z 168 as a quantifier (fragment) ion. A linear (R2> 0.999) calibration curve in urine was obtained over a range 0.2-10 ng mL(-1). This method is about 20 times more sensitive than previously described procedures, and is characterized by high accuracy (mean 90%) and good reproducibility (RSD <10%). The optimized method was applied to determination of 8OHdG in 18 urinary samples derived from three healthy volunteers. 8OHdG urinary excretion ranged from 3.0-7.9 microg/day, and a large intra-individual variation was found. This method, which effectively circumvents the need for isotopically labeled 8OHdG (internal standard), is suitable for routine monitoring of exposure to DNA-damaging factors in a large number of subjects.     

Influence of compatibilizer degradation on formation and properties of PA6/organoclay nanocomposites

Nanocomposites based on polyamide 6 (PA6) and commercial layered silicates have been prepared by both in situ polymerization and melt compounding. The main aim of the present work has been centred on compatibilizer degradation, caused by the preparation conditions, in terms of nanocomposite end features. Two montmorillonite (MMT)-type, organically-modified clays (OMLS), namely Cloisite 30B^® and Nanofil 784^®, and a sodium MMT (Cloisite Na^®) have been studied. Thermal properties of the layered silicates have been evaluated by TGA, IR, WAXD and pyrolysis-gas-mass. In order to better assess the influence of high temperature processes on clay modifications, a thermal treatment which mimics the conditions used during the in situ polymerization (4 h at 250 °C) has been applied on layered silicates. The above treatment, besides the elimination of absorbed water from all the clays, turned out to prove noteworthy differences in compatibilizer modification for the two organoclays. Indeed, in the case of Closite 30B^® only a removal of organic molecules outside the silicate galleries and a likely reorganization of those present inside the galleries have been detected, while a relevant chemical modification of Nanofil 784^® compatibilizer has been conversely found.As far as nanocomposite characteristics are concerned, the latter have been found to depend on both the preparation method and clay type. In the case of in situ polymerization, also thermally-treated layered silicates, coded (T), have been used, in order to put more clearly in evidence the role of compatibilizer decomposition on nanocomposite formation and properties. Indeed, nanocomposite samples containing Closite 30B^®(T) have been found to be completely exfoliated, while the same thermal treatment seems to make worse the properties of those based on Nanofil 784^®(T). Furthermore, with respect to nanocomposites based on pristine clays, samples containing thermally-treated silicates turned out to be different in terms of both molecular mass and crystal structure of the polymer matrix. Namely, PA6 γ-form seems to be promoted for all nanocomposites prepared in such a way, probably because of water removal at high temperature, which makes -OH groups of the layered silicate more free to interact with polyamide chains, thus causing a restriction of their mobility.     

Analysis of a Distinguished Laplacian on Solvable Lie Groups

We study a class of kernels associated to functions of a distinguished Laplacian on the solvable group AN occurring in the Iwasawa decomposition G = ANK of a noncompact semisimple Lie group G. We determine the maximal ideal space of a commutative subalgebra of L¹, which contains the algebra generated by the heat kernel, and we prove that the spectrum of the Laplacian is the same on all L^p spaces, 1 ≤ p < ∞. When G is complex, we derive a formula that enables us to compute the L^p norm of these kernels in terms of a weighted L^p norm of the corresponding kernels for the Euclidean Laplacian on the tangent space. We also prove that, when G is either rank one or complex, certain Hardy-Littlewood maximal operators, which are naturally associated with these kernels, are weak type (1, 1).     

Norms of characters and Fourier series on compact Lie groups

We prove new estimates for the p norms of irreducible characters of compact Lie groups. These estimates are applied to give negative results on p mean convergence of Fourier series on compact Lie groups.     

Development and validation of a capillary high-performance liquid chromatography/electrospray tandem mass spectrometric method for the quantification of bisphenol A in air samples

Bisphenol A (BPA) is a toxic industrial chemical that affects the endocrine system even at low concentrations. A new method, based on capillary high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (HPLC/ESI-MS/MS) analysis, has been developed to determine BPA in atmospheric samples. The method involves collection of air samples (typically 2 m(3)) on glass fiber filters, with ultrasonic extraction and sample concentration under vacuum before analysis. HPLC analysis was performed isocratically at a flow rate of 10 microL min(-1) using a capillary reversed-phase column and MS/MS analysis in negative ion multiple reaction monitoring (MRM) mode, using BPA-d(16) as internal standard. The present method provides linear response in the range 0.007-3.5 microg/filter (R(2) > 0.999) and is characterized by high accuracy (mean bias 2%) and good reproducibility (mean RSD 5%). High sensitivity (LOD = 2 ng/m(3) based on 2 m(3) of air collected), specificity, and speed of the analysis make the present method suitable for routine determination of BPA in the atmosphere, both for ambient and personnel monitoring.     

Isomerization of oxazolinyl allylic alcohols: synthesis of 3-alkylidene-2-iminooxetanes

Oxazolinyl allylic alcohols 2 convert smoothly into 3-alkylidene-2-iminooxetanes 3 and dienic carboxylic acids 7 simply upon treatment with aqueous HCl.