Benzyne cyclisation with carbanion activated aromatic rings1

Attempts to cyclise o-chlorophenyl benzyl ether, sulphide, sulphoxide and sulphone by treatment with KNH₂/NH₃ were unsuccessful. Similar reaction of 1-(o-chlorophenyl)-2,2-diphenylethane led to amination whereas α-(o-chlorobenzyl)phenylacetic acid gave a dihydrocoumarin. Reaction of 4- and 2-(o-chlorophenethyl)-pyridines, however, afforded products comprising benzisoquinolines and 1-pyridylbenzocyclobutenes.     

Phase transitions in chlorobenzene-cis-decalin mixtures

The dielectric constant ?' and loss tangent tan δ of chlorobenzene-cis-decalin mixtures have been measured in the temperature range 77 K to 330 K and frequency range 0.1 to 100 kHz. On cooling, ?' increases with decreasing temperature upto about 135 K, after which it drops rapidly with decreasing T followed by a slow decrease. This indicates that the liquid mixture goes to an amorphous phase which transforms to a glass phase of restricted dipole rotation below T_g; however, the peak in ?' is due to relaxation in the amorphous phase (α relaxation) and does not give an exact T_g. On heating, the behaviour of the cooling curve is retraced upto 160 K, after which ?' drops suddenly to a value lower than that at 77 K in the glass phase. This indicates the transition to a crystalline phase in which dipole rotational freedom is completely lost. The crystalline phase changes to a eutectic liquid phase of high ?' at a temperature (200 K) lower than the melting point of chlorobenzene and cis-decalin. Dielectric dispersion is observed only in the glass and amorphous phases. The dielectric relaxation time is independent of the concentration of chlorobenzene.     

alpha-thiocyanation of carbonyl and beta-dicarbonyl compounds using (dichloroiodo)benzene-lead(II) thiocyanate

The combination reagent (dichloroiodo)benzene and lead(II) thiocyanate in dichloromethane effects oxidation of various enol silyl ethers, ketene silyl acetals, and beta-dicarbonyl compounds, thereby providing an efficient and convenient method for alpha-thiocyanation of carbonyl and beta-dicarbonyl compounds.     

Redox and oxo-abstraction Reactions of Silylamine with MoOCl4

Trimethylsilyldiethylamine Me₃SiNEt₂ and MoOCl₄ (1:1) undergo a free radical redox reaction in CH₂Cl₂ or Et₂O to form MoCl₃O(HNEt₂). Reduction occurs even in aprotic media like CCl₄ and CS₂ to give Mo^V complexes Mo₂Cl₆O₂(N₂Et₄) and Mo₂Cl₆O₂[(SCNEt₂)₂S₂], respectively. A 2:1 reaction in nonionizing protic solvents undergoes redox cum cleavage to provide MoCl₂O(NEt₂) (HNEt₂) but a reaction at reflux temperature in 1,2-dichloroethane leads to diethylammonium salt, [Et₂NH₂][MoCl₄O(HNEt₂)]. Higher molar reactions (3:1, 4:1) in CH₂Cl₂ or Et₂O are associated with redox reaction as well as oxygen atom abstraction to form de-oxo Mo^IV complex MoCl₃(NEt₂)(HNEt₂)₂, whereas, a 3:1 reaction in CS₂ forms Mo₂Cl₄O(S₂CNEt₂)₄. Compounds have been characterized by elemental analyses, redox titration, magnetic moment, conductance, infrared, electronic absorption and ¹H-NMR measurements.     

Products active on arthropod-IV Insect juvenile hormone mimics—4: hydrindane analogues of cecropia juvenile hormone

Synthesis of cis-hydrindane analogues (2,3) of Cecropia juvenile hormone-I from common intermediate cis-hydrindane-2, 5-dione is presented. The analogues are only moderately active against Dysdercus cingulatus.     

Studies on electroosmotic and electrophoretic behavior of cholesterol in aqueous solutions

Electrical properties of cholesterol interfaces have been investigated. For this purpose electroosmotic and hydrodynamic permeation of water, sodium chloride, barium chloride, aluminum chloride, and urea solutions across a cholesterol plug have been investigated. Dependence of electroosmotic permeability on concentration of electrolytes has also been studied. Electrophoretic mobility of cholesterol particles of known size distribution and dispersed in solutions of varying concentrations of electrolytes and urea has also been studied. The data have been used to estimate ζ potentials in order to have a plausible picture of the electrical double layer at the cholesterol/ solution interfaces.     

Extraction of U(VI) by cyanex-272

Extraction of U(VI) from HNO₃, HCl and HClO₄ media using cyanex-272 (bis[2,4,4 trimethyl pentyl] phosphinic acid)/n-dodecane has been carried out. In the case of HNO₃ and HClO₄ media, the distribution ratio (D) value first decreases and then increases, whereas from HCl medium it first decreases and then remains constant with increase in H⁺ ion concentration. At lower acidities, U(VI) was extracted as UO₂(HA₂)₂ by an ion exchange mechanism, whereas at higher acidities as UO₂(NO₃)₂ ^.2(H₂A₂) following a solvation mechanism. The D for U(VI) by cyanex-272, PC-88A and DEHPA at low acidities follows the order cyanex-272 > PC-88A > DEHPA. Also, cyanex-272 was found to extract U(VI) more efficiently than TBP at 2M HNO₃. The effect of diluents on the extraction of U(VI) by cyanex-272 followed the order cyclohexane > n-dodecane > CCl₄ > benzene. The loading of U(VI) into cyanex-272/n-dodecane from 2M HNO₃ has shown that at saturation point, cyanex-272 was 78% loaded. No third phase was observed at the saturation level. The stripping of U(VI) from the loaded organic phase was not possible with water, it was poor with acetic acid and sodium acetate but quantitative with oxalic acid, ammonium carbonate and sodium carbonate.     

Study of hexane adsorption in nanoporous MCM-41 silica

We study here the adsorption of hexane on nanoporous MCM-41 silica at 303,313, and 323 K, for various pore diameters between 2.40 and 4.24 nm. Adsorption equilibria, measured thermogravimetrically, show that all the isotherms, that are somewhat akin to those of type V, exhibit remarkably sharp capillary adsorption phase transition steps and are reversible. The position of the phase transition step gradually shifts from low to high relative pressure with an increase in the temperature as well as the pore sizes. The isosteric heats of adsorption derived from the equilibrium information using the Clapeyron equation reveal a gradual decrease with increasing adsorbed amount because of the surface heterogeneity but approach a constant value near the phase transition. A decrease in the pore size results in an increase in the isosteric heat of adsorption because of the increased dispersion forces. A simple strategy, based on the Broekhoff and De Boer adsorption theory, successfully interprets the hexane adsorption isotherms for the different pore size MCM-41 samples. The parameters of an empirical expression, used to represent the potential of interaction between the adsorbate and adsorbent, are obtained by fitting the monolayer region prior to capillary condensation and the experimental phase transition simultaneously, for some pore sizes. Subsequently, the parameters are used to predict the adsorption isotherm on other pore size samples, which showed good agreement with experimental data.     

Extraction behavior of uranium(VI), plutonium(IV), zirconium(IV), ruthenium(III) and europium(III) with γ-pre-irradiated solutions of N,N′-methylbutyl substituted amides in n-dodecane

The extraction of plutonium(IV), uranium(VI), zirconium(IV), europium(III) and ruthenium(III) with -pre-irradiated n-dodecane solutions of methylbutyl substituted hexanamide (MBHA), octanamide (MBOA) and decanamide (MBDA) from 3.5M HNO₃ has been studied as a function of absorbed dose up to 184×10⁴ Gray. The distribution ratios (K_d) of uranium(VI) decreased gradually up to a dose of 50×10⁴ Gray and became almost constant thereafter, while ruthenium(III) and europium(III) were not extracted in the entire dose range studied. The K_d values of Pu(IV) decreased gradually up to 10×10⁴ Gray, for MBOA, and 30×10⁴ Gray for MBHA and MBDA and then increased up to a dose of 72×10⁴ Gray, indicating the synergistic effect of radiolytic products at higher doses. The extraction of zirconium(IV) was found to increase gradually up to 72×10⁴ Gray. However, the steep fall in K_d values of plutonium(IV), zirconium(IV) beyond a dose of 72×10⁴ Gray was atrributed to third phase formation. The radiolytic degradation of amides was monitored by quantitative IR spectroscopy and was found to follow the order MBOA>MBDA>MBHA at 184×10⁴ Gray having the amines and carboxylic acids as the main radiolytic products.