Temperature and Oxygen Partial Pressure Dependences of the Surface Tension of Liquid Sn–Ag and Sn–Cu Lead-free Solder Alloys

Temperature dependence of the surface tension of liquid Sn–Ag and Sn–Cu base lead-free solder alloys and oxygen partial pressure dependence of liquid Sn–Ag alloy were evaluated using the experimental data obtained, respectively, by the constrained drop method and the sessile drop method in the previous studies [1, 2]. The temperature dependences of the surface tension have maximum positive values when the mol fraction of Ag and Cu is about 0.7, while those for pure liquid Sn, Ag, and Cu have negative values. The calculated values based on Butler’s equations were found to be in reasonable agreement with those of the experimental data. The oxygen partial pressure dependences of the surface tension of liquid Sn–Ag alloys at 1253 K have a minimum value when the mol fraction of Ag is about 0.9 and the oxygen partial pressure is less than about 10⁻¹³ atm. From this, it is considered that the oxygen adsorption increased by adding Ag to Sn when the mol fraction of Ag is less than 0.9.     

Self-crosslinkable polymers. I. Copolymerization of glycidyl methacrylate with 2-vinylpyridine and 2-vinyl-5-ethylpyridine

A soluble and self-crosslinkable linear copolymer with pendant epoxy and pyridyl groups was obtained from glycidyl methacrylate (M₁) and 2-vinylpyridine (M₂) or 2-vinyl-5-ethylpyridine (M₂) by the action of azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C: r₁ = 0.510, r₂ = 0.620 with 2-vinylpyridine and r₁ = 0.57, r₂ = 0.62 with 2-vinyl-5-ethylpyridine. These were consistent with the calculated values with the reported Q and e values for these monomers. The intrinsic viscosities of the copolymers with 2-vinylpyridine and with 2-vinyl-5-ethylpyridine were found to be 0.17–0.19 and 0.26–0.38, respectively, in tetrahydrofuran at 30°C; they were independent of the copolymer composition. The copolymers were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.     

Chelate-forming resins prepared by modification of anion-exchange resins

The properties of some chelate-forming resins prepared from common anion-exchange resins by treatment with reagents bearing chelate-forming and ion-exchange groups have been studied. A resin prepared from the sulphonic acid derivative of dithizone (DzS) was found to be superior to other chelate-forming resins. Resins loaded with DzS, tetraphenylporphinetrisulphonic acid or zincon were stable in 1M sodium chloride. Resins prepared from sulphonazo III, arsenazo III, thiosalicylic acid or p-mercaptobenzenesulphonic acid were found to be unstable when exposed to sodium chloride solution.     

Improved method for the determination of trimethadione and its demethylated metabolite, dimethadione, in human serum by gas chromatography.

An improved gas chromatographic method, involving the use of a wide-bore capillary column, for the determination of trimethadione and its only demethylated metabolite, dimethadione, in human serum is described. The results indicate that both substances and the internal standard (maleinimide) were well separated with no tailing peak. The detection limit was 10 ng/ml for trimethadione and 50 ng/ml for dimethadione. This improved method is reliable in terms of sensitivity, selectivity and reproducibility for the simultaneous determination of both compounds in human serum.     

Effects of metal elements on beta-hexosaminidase release from rat basophilic leukemia cells (RBL-2H3).

Immediate allergy is caused by a chemical mediator released from basophile and mast cells via cell degranulation due to reaction between an immunoglobulin E (IgE) antibody, bound with the IgE receptor on the cell membrane, and an antigen. The present authors have established a new method for assaying the enzyme activity of beta-hexosaminidase as an index of chemical mediator release. Using cultured cells instead of conventional methods based on histamine release from mast cells, the present method permits highly accurate mass screening since it uses a well-established cell line of rat basophilic leukemia cells (RBL-2H3). The effects of metal elements on immediate allergic reaction were evaluated using a newly developed assay system. A total of 38 metal elements were investigated for effects on immediate allergic reactions in vitro. These elements were classified by five types on the basis of action on beta-hexosanimidase release: 1) those which showed very strong inhibitory action, such as ZnCl2 and ZrCl4, 2) those which showed relatively strong inhibitory action, such as CdCl2 and CuCl2, 3) those which showed relatively weak inhibitory action, such as CoCl2 and Pb(NO3)2, 4) those which showed neither inhibitory nor promoting action, such as MnCl2 and SrCl2, and 5) AgNO3, which alone showed promoting action.     

High n-value phases in the complex bismuth oxides with layered structure,Bi2CaNan−2NbnO3n+3

Complex bismuth oxides with layered structure are prepared with a series of compositions in the system Bi₂CaNb₂O₉-NaNbO₃. It is found by X-ray powder diffraction that each compound is composed of more than two phases, which are described by a formula Bi₂CaNa_n?2Nb_nO_3n+3, e.g., in the sample with the nominal composition Bi₂CaNb₂O₉ · 8NaNbO₃, the phases with n = 6 to 8 appear predominantly. These phases are closely intergrown to each other. Moreover, high-resolution electron microscopy reveals that microsyntactic intergrowth frequently occurs in the phases with n > 5. The occurrence of the latter intergrowth is explained in terms of the bond length obtained.     

DNA topology on an increase in positive writhing number of DNA: conformation changes in the time course of cis-diamminedichloroplatinum(II)-DNA adducts

We show that the topological significance of the gel mobility of cis-diamminedichloroplatinum(II) (DDP)-closed circular DNA (ccDNA) adducts decreases with reaction time, until a point at which it joins relaxed DNA, and that the mobility of the adducts increases again. There is no relationship between the relative length of the adducts and the gel mobility. Although the significance of the decrease of gel mobility is due to the unwinding of cis-DDP-DNA (or trans-DDP-DNA) adducts, the conformational significance of the subsequent increase in mobility is unclear. To elucidate the conformational significance for unwinding of the adducts, we measured the writhing number (Wk) of the adducts using electron microscopy and analyzed the topological states of cis-DDP (or trans-DDP) adducts based on the White rule, Lk=Wk+Tk. Where, Lk and Tk represent the linking and twisting number in the ring, respectively. From the data, we found that the Wk of cis-DDP-ccDNA adducts in comparison with trans-DDP-ccDNA adducts increases from a negative to a positive number with time. This suggests that cis-DDP plays a role in the change of the topological state of ccDNA. In the abstraction of platinum from the adducts with CN- ion, the differences in both topological states may explain why Pt in trans-DDP is abstracted more easily than in cis-DDP. To explain the abstraction of Pt ion, we also discuss the findings based on the thermodynamic cycle in a intermolecular crosslink model Pt(NH3)2(guanine)2(2+)-->Pt(CN)4(2-) using the Pt parametrized PM3 method.     

Theoretical design of singlet localized σ-diradicals: C(MH2)3C (M = Si, Ge, Sn, Pb)

Some localized singlet 1,3-σ-diradicals, C(MH₂)₃C, (M = Si, Ge, Sn, Pb) were theoretically designed by the orbital phase theory and density functional theory calculations. The bicyclic carbon-centered singlet diradicals were more stable than the lowest triplets. Except for M = C, σ-bonded isomers were not located for 1,3-σ-diradicals. 1,4-σ-diradicals, C(M₂H₄)₃C, also had singlet ground states, but they were less stable than σ-bonded isomers.     

Polyoxymethylene prepared by γ-ray-induced polymerization of tetraoxymethylene single crystal

Summary In order to prepare a large single crystal, tetraoxymethylene recrystallized by distilled water adjusted to pH 8 was sealed in an ampoule at a reduced pressure of 1 mm Hg and was crystallized in a furnace with the temperature gradient of 6 °C/cm. The lowering rate of the ampoule was required to be 6 cm/day for preparing the single crystal with 1 cm diameter and to be 3 cm/day for one with 2 cm diameter. The optimum angle at the pointing end of the ampoule, where a seed crystal is formed, was about 40°. The b-axis of the obtained single crystal was parallel to the direction of the crystal growth i. e. the wall of the ampoule. It was polymerized byγ-ray under conditions which prevent the growth of the twin crystal. The obtained polyoxymethylene was porous, because the polymerization yield of 100% could not be attained. However, it was so tough that a specimen for measurements could be cut down by a diamond cutter. Its fiber axis was parallel to the direction of the wall of the ampoule. It did not contain the so-called amorphous regions, although it did contain defects. It was characterized with the extremely high orientation of the polymer chains.

---

Zusammenfassung Zur Pr?parierung gro?er Einkristalle wurde rekristallisiertes Tetraoxymethylen in destilliertem Wasser von p_H 8 in eine Ampulle bei einem reduzierten Quecksilberdruck von 1 mm eingefüllt und in einem Ofen mit einem Temperaturgradienten von 6 °C/cm kristallisiert. Die Abkühlgeschwindigkeit der Ampulle betrug etwa 6 cm/Tag für die Pr?paration eines Einkristalls mit 1 cm ? und 3 cm/Tag für einen solchen mit 2 cm ?. Der optimale Winkel am spitzen Ende der Ampulle, wo der Keimkristall gebildet wird, betrug etwa 40°. Dieb-Achse des Einkristalls war parallel zur Wachstumsrichtung, d. h. zur Wand der Ampulle. Der Kristall wurde durch R?ntgenstrahlen polymerisiert unter Bedingungen, die das Wachsen eines Zwillingskristalls vermeiden. Das erhaltene Polyoxymethylen war por?s, doch konnte eine Polymerisationsausbeute von 100% nicht erhalten werden. Doch war der Einkristall so z?h, da? für Messungen eine Probe mit dem Diamantschneider abgeschnitten werden konnte. Die Faserachse war parallel zur Wandrichtung der Ampulle. Das kristalline Material enthielt keine sogenannten amorphen Bereiche, allerdings Defekte. Es war durch extrem hohe Orientierungen der Polymerketten charakterisiert.

---

---

We are greatly indebted to Dr.Y. Miyake of Mitsui Toatsu Co., Ltd. for providing the tetraoxymethylene. Thanks are to due Dr.M. Nishii of Osaka Laboratories, Japan Association for Radiation Research on Polymer for the radiation polymerization, to Mr.T. Tsukihara for the X-ray measurement, and to Mrs.H. Tanaka for the help with the electron microscopy. We are also grateful to Prof.S. Seki for offering the use of differential scanning calorimeter.