A Product Formed from Glycylglycine in the Presence of Vanadate and Hydrogen Peroxide: The (Glycylde-N-hydroglycinato-kappa(3)N(2),N(N)(),O(1))oxoperoxovanadate(V) Anion

A crystalline glycylglycine complex of monoperoxovanadate has been obtained and its X-ray structure determined. The coordination is pentagonal bipyramidal with the peroxo group and a tridentate glycylglycine occupying the equatorial positions. The axial positions of the anion are occupied by the oxo ligand and by one oxygen of the peroxo group of the adjacent anion. The latter interaction establishes the seventh bond and produces a dimeric structure in the crystalline material. NMR studies of its dissolution in water combined with previously reported results from equilibrium measurements show that the dimer dissociates in water to the monomeric precursor. It is proposed that this monomer corresponds to the complex responsible for the inhibition of the vanadium-catalyzed decomposition of hydrogen peroxide by glycylglycine. Crystal structure of [NEt(4)][VO(O(2))(GlyGly)].1.58H(2)O: monoclinic, space group P2(1); Z = 4; a = 10.618(2) ?; b = 14.803(2) ?; c = 11.809(2) ?; beta = 101.37(2) degrees; V = 1819.7 ?(3); T = 198 K; R(F)() = 0.029 for 2664 data (I(o) >/= 2.5sigma(I(o))) and 431 variables.     

Rapid sensitive speciation analysis of butyl- and phenyltin compounds in water by capillary gas chromatography atomic emission spectrometry (GC-AES) after in-situ ethylation and in-liner preconcentration

Summary A rapid, simple and sensitive method has been developed for the simultaneous determination of butyl- and phenyltin species in environmental waters. The ionic organotin compounds are ethylated in the aqueous phase using sodium tetraethylborate (NaBEt₄) and extracted with hexane. A 25 l aliquot of the extract is injected at a low temperature into a Tenax filled liner. After solvent venting the analytes are transferred onto the capillary column using programmed temperature vaporization (PTV) injection. Detection is done by means of a microwave induced plasma atomic emission detector (MIP AED). The method allows the determination of butyl- and phenyltin compounds in water samples down to the level of 0.1 ng/l (as Sn) while 50 ml of sample is sufficient for analysis. The accuracy of the method was confirmed by GC-AAS after chelation and Grignard derivatization.     

Flow injection on-line sorption preconcentration of platinum in a knotted reactor coupled with electrothermal atomic absorption spectrometry

A flow injection on-line sorption preconcentration method for the electrothermal AAS determination of platinum has been developed. The pyrrolidine dithiocarbamate complexes of either Pt⁴⁺ or Pt²⁺, formed in 0.7 mol L^–1 HNO₃, are on-line adsorbed on the inner walls of a PTFE knotted reactor and subsequently eluted with methanol. An enhancement factor of 112 and a detection limit (3 σ) of 10 ng L^–1 along with a sampling frequency of 21 h^–1 are achieved with a 90 s preconcentration time at a sample flow rate of 8.8 mL min^–1. The relative standard deviation is 2.5% for 0.4 μg L^–1 Pt. The method has been applied to the determination of platinum in blood samples.     

Mononuclear nitrogen/sulfur-ligated zinc methoxide and hydroxide complexes: investigating ligand effects on the hydrolytic stability of zinc alkoxide species

The synthesis and properties of mononuclear zinc methoxide ([(ebnpa)Zn-OCH3]ClO4) (1) and hydroxide ([(ebnpa)Zn-OH]ClO4) (2) complexes of a new mixed nitrogen/sulfur ligand (ebnpa = N-2-(ethylthio)ethyl-N,N-bis(6-neopentylamino-2-pyridylmethyl)amine) are reported. The structures of 1 and 2 were determined by X-ray diffraction. Each possesses a single zinc-coordinated anion (methoxide or hydroxide) and exhibits an overall trigonal bipyramidal geometry. Structural and spectroscopic studies indicate the presence of two hydrogen-bonding interactions involving the oxygen atom of the zinc-bound anion in each complex. Treatment of [(ebnpa)Zn-OH]ClO4 with CH3OH results in the formation of an equilibrium mixture of 1 and 2. 1H NMR spectroscopic methods were used to examine the equilibrium as a function of temperature, yielding KMe (304 K) = 0.30(8), DeltaHMe = -0.9(1) kcal/mol, and DeltaSMe = -5(1) eu. The negative enthalpy indicates that spontaneous zinc alkoxide formation from a hydroxide precursor occurs in this system at low temperature. Using the experimentally determined DeltaHMe value, we found the homolytic Zn-O bond dissociation energy (BDE) in the Zn-OCH3 unit to be approximately -14 kcal/mol relative to the Zn-O BDE in the Zn-OH unit.     

Determination of sugar structures in solution from residual dipolar coupling constants: methodology and application to methyl beta-D-xylopyranoside

We have developed methodology for the determination of solution structures of small molecules from residual dipolar coupling constants measured in dilute liquid crystals. The power of the new technique is demonstrated by the determination of the structure of methyl beta-d-xylopyranoside (I) in solution. An oriented sample of I was prepared using a mixture of C(12)E(5) and hexanol in D(2)O. Thirty residual dipolar coupling constants, ranging from -6.44 to 4.99 Hz, were measured using intensity-based J-modulated NMR techniques. These include 15 D(HH), 4 (1)D(CH), and 11 (n)D(CH) coupling constants. The accuracy of the dipolar coupling constants is estimated to be < +/- 0.02 Hz. New constant-time HMBC NMR experiments were developed for the measurement of (n)D(CH) coupling constants, the use of which was crucial for the successful structure determination of I, as they allowed us to increase the number of fitted parameters. The structure of I was refined using a model in which the directly bonded interatom distances were fixed at their ab initio values, while 16 geometrical and 5 order parameters were optimized. These included 2 CCC and 6 CCH angles, and 2 CCCC and 6 CCCH dihedral angles. Vibrationally averaged dipolar coupling constants were used during the refinement. The refined solution structure of I is very similar to that obtained by ab initio calculations, with 11 bond and dihedral angles differing by 0.8 degrees or less and the remaining 5 parameters differing by up to 3.3 degrees . Comparison with the neutron diffraction structure showed larger differences attributable to crystal packing effects. Reducing the degree of order by using dilute liquid crystalline media in combination with precise measurement of small residual dipolar coupling constants, as shown here, is a way of overcoming the limitation of strongly orienting liquid crystals associated with the complexity of (1)H NMR spectra for molecules with more than 12 protons.     

Syntheses and reactivity of the diselenido molybdenum-manganese complex CpMoMn(CO)5(mu-Se2)

Reaction of CpMoMn(CO)(8) with elemental selenium and Me(3)NO in the absence of light yielded the diselenido complex CpMoMn(CO)(5)(mu-Se(2)), 2. Compound 2 contains a bridging diselenido ligand lying perpendicular to the Mo-Mn bond, Mo-Mn = 2.8421(10) A. In the presence of room light, the reaction yielded the tetranuclear metal complex Cp(2)Mo(2)Mn(2)(CO)(7)(mu(3)-Se)(4), 3 (36% yield), and 2 (7% yield). Compound 2 reacted with ethylene to yield the ethanediselenato complex CpMoMn(CO)(5)(mu-SeCH(2)CH(2)Se), 4, by insertion of ethylene into the Se-Se bond. Compound 2 also reacted with (PPh(3))(2)Pt(PhC(2)Ph) and CpCo(CO)(2) to yield the complexes CpMoMnPt(PPh(3))(2)(CO)(5)(mu(3)-Se)(2), 5, and Cp(2)CoMoMn(CO)(5)(mu(3)-Se)(2), 6, respectively, by insertion of the metal groupings CpCo and Pt(PPh(3))(2) into the Se-Se bond of 2. The oxo compound Cp(2)CoMo(O)Mn(CO)(5)(mu(3)-Se)(2), 7, was obtained from 6 by decarbonylation at molybdenum by using Me(3)NO. The molecular structures of the complexes 2-7 were established by single-crystal X-ray diffraction analyses.     

The determination of beryllium and manganese in aerosols by atomic absorption spectrometry with electrothermal atomization

The determination of beryllium and manganese in air particulate matter collected on filter material is discussed. Destruction by digestion with nitric and perchloric acids and by low-temperature ashing with dissolution of the ash in a hydrofluoric-nitric acid mixture were tested. The graphite furnace parameters were investigated for different acid solutions. Interferences of some cations and anions that are abundant in aerosol material are described. Accuracy was checked against standard samples. For manganese, the results are compared with those obtained by energy-dispersive x-ray fluorescence.     

Size control of dendrimer-templated silica

One of the most significant challenges facing the biomimetic synthesis of materials is achieving the requisite level of dimensional and spatial control. Typical reaction conditions for biomimetic silica synthesis allow for continued growth and ripening leading to the formation of larger nanospheres on the order of 200-600 nm in diameter. Herein, we have used polyamidoamine and polypropylenimine dendrimers as templates to expand the reaction conditions of biogenic silica production to produce a more robust synthesis leading to size-selective precipitation of silica nanospheres. Through the use of defined concentrations of phosphate buffer and main group metal chloride salts, we have shown that the biomimetic silica growth process is controlled by cationic neutralization of the anionic silica nanosphere surface. Neutralization minimizes electrostatic repulsions, allowing for agglomerization and continued growth of nanospheres. By controlling these concentrations, we can selectively produce silica nanospheres of desired dimensions between 30 and 300 nm without adversely affecting the template's activity.     

Development of a gas chromatography/ion trap mass spectrometry based method for the quantification of polybrominated diphenyl ethers and polychlorinated biphenyls in adipose tissue

A combined gas chromatographic mass spectrometric (GC/MS/MS) method for the determination of seven polybrominated diphenyl ethers (PBDEs) and seven marker polychlorinated biphenyls (PCBs) in adipose tissue has been developed. Adipose tissue was melted and filtered through anhydrous sodium sulphate to obtain pure fat. Clean-up was performed using a glass column containing acidified silica, deactivated alumina and anhydrous sodium sulphate. Polybrominated biphenyl (PBB) 155 and Mirex were added as internal standards for PBDEs and PCBs, respectively. Injection standards, PBB 103 and PCB 143, for PBDEs and PCBs, respectively, were added before analysis with GC/MS/MS. The developed GC/MS/MS method has the advantage of being more selective than single MS methods because matrix effects are largely eliminated. Validation of this method was conducted according to Commission Decision 2002/657/EC. Decision limits for PBDEs and PCBs ranged from 0.06-0.15 ng g(-1) and from 0.35-1.22 ng g(-1), respectively. Detection capabilities were all between 0.23-0.55 ng g(-1) for PBDEs and between 0.98-2.29 ng g(-1) for PCBs. Precision, recovery, bias and selectivity were tested, with satisfactory results.     

The synthesis and structure of bis(acetonitrile)nitrosyl tris(3,5-dimethylpyrazolyl)borato molybdenum hexafluorophosphate

Summary Treatment of [Mo{HB(3,5-Me₂C₃HN₂)₃}(NO)I₂] with one or two moles of AgPF₆ in acetonitrile afforded the paramagnetic (one unpaired electron) complex [Mo{HB(3,5-Me₂C₃NH₂)₃}(NO)(NCMe)₂][PF₆]. The structure of this complex was determined crystallographically, and the six-coordinate geometry of the complex cation confirmed.