Biosurfactant production by Rhodococcus erythropolis grown on glycerol as sole carbon source

The production of biosurfactant by Rhodococcus erythropolis during the growth on glycerol was investigated. The process was carried out at 28°C in a 1.5-L bioreactor using glycerol as carbon source. The bioprocess was monitored through measurements of biosurfactant concentration and glycerol consumption. After 51 h of cultivation, 1.7 g/L of biosurfactant, surface, and interfacial tensions values (with n-hexadecane) of 43 and 15 mN/m, respectively, 67% of Emulsifying Index (E ₂₄), and 94% of oil removal were obtained. The use of glycerol rather than what happens with hydrophobic carbon source allowed the release of the biosurfactant, originally associated to the cell wall.     

Semiempirical INDO/S study on the absorption spectrum of violacein

Violacein is the major pigment produced by Chromobacterium violaceum. We now report the results of semiempirical calculations on the electronic spectrum of violacein. We have used the AM1 and Intermediate Neglect of Differential Overlap (INDO) model Hamiltonians. Solvent effects have been included with the SCRF model for spectroscopy as proposed by Zerner and Karelson. Our results suggest that in the gas phase violacein is almost planar while in ethanolic solution the H-bond interactions force an internal rotation due to sterical factors. The calculated UV-visible spectrum with the inclusion of specific solvent interactions in the Hamiltonian is on good agreement with the experimental spectrum.     

Design and synthesis of a hydrophilic fluorescent derivatization reagent for carboxylic acids, 4-N-(4-N-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole (NBD-PZ-NH2), and its application to capillary electrophoresis with laser-induced fluorescence detection

A hydrophilic fluorescent derivatization reagent for fatty acids, 4-N-(4-N-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole (NBD-PZ-NH(2)), was designed and synthesized. NBD-PZ-NH(2) possesses not only a fluorophore and a reacting group but also a positive charge group and, thus, was hydrophilic and suitable for application to capillary electrophoresis. NBD-PZ-NH(2) reacted with fatty acids in the presence of triphenylphosphine (TPP) and 2,2'-dipyridyl disulfide (DPDS) at room temperature within 10 min. The derivatives were strongly fluoresced and were positively charged at pH below 3. The derivatives of C4-C20 fatty acids were separated within 10 min in 50% acetonitrile in water containing 30 mM ammonium acetate and 1.0 M acetic acid by capillary electrophoresis with laser-induced fluorescence (CE-LIF) detection. The detection limits attained were 6.5 nM (signal-to-noise ratio of 3). It is proposed that NBD-PZ-NH(2) is a prominent derivatization reagent for fatty acids which is suitable for CE-LIF application.     

Bioluminescence flow sensor for determination of creatine kinase activity in blood

A bioluminescent flow sensor was developed for the assay of creatine kinase (CK) using firefly luciferase immobilized on a nylon coil. The CK-catalysed reaction of creatine phosphate with ADP took place in a cuvette before the injection into the bioluminescent detector coil. The response was linear from 0.1 to 100 U l^? at 25°C. An advantage of the flow sensor is a detection limit of less than 0.1 U l^?1, which, together with a high precision, allows determination of the CK activity in blood sera in about 5 min. The intra- and inter-assay reproducibilities (RSD) were less than 10% and the recovery range was 86–110%. The results agreed well with those obtained with a spectrophotometric method and with the normal reference values.     

Aspects of the thermal and photostabilisation of high styrene-butadiene copolymer (SBC)

The thermal and photo-oxidative stabilisation of high styrene-butadiene copolymer (SBC) with high styrene content (K-Resin) has been studied using a variety of analytical and spectroscopic methods including yellowness, luminescence and FT-IR spectroscopy coupled with hydroperoxide analysis in order to understand the nature and effectiveness of the processes involved. The next stage of the program was to evaluate the effects of various chemical/solvent treatments on the role of metal ions/residual catalysts and hydroperoxides in the thermal and photostabilisation of SBS as well as combinations of phenolic antioxidants and phosphites/phosphonites. Other additives, such as HALS and a metal deactivator, were also added to the combinations of phenolic and phosphite antioxidants in order to study their behaviour and efficiency. The chemical treatments appeared to stabilise SBS against thermal oxidation to a greater or lesser extent. Phosphoric acid treatment via reflux and zinc dithiocarbamate treatments showed better performances than the rest of the treatments, the latter was particularly effective at inhibiting the discolouration. During photo-oxidation, on the other hand, chemical treatments involving phosphoric acid and pre-thermal effects showed the importance of catalyst effects. The addition of phenolic antioxidants, phosphites/phosphonites, metal deactivator and HALS was found to stabilise the SBS against thermal and photo-oxidation. In thermal oxidation, the combination of Irganox^® 1010/Irgafos^® 168 was found to effectively stabilise the polymer when the finalisation of the polymerisation was with adipic acid. When the same antioxidants were used, but with polymer finalised with BHT, strong yellowing was observed and a higher amount of hydroperoxides and oxidation products. Increasing the amount of antioxidants did not increase the stabilisation efficiency. The stabilisation efficiency of Irganox^® 1010 combined with Alkanox^® P-24 was found to be more effective than when it was combined with Irgafos^® 168. The formulations containing Irgafos^® 168/Irganox^® 1010 and Irgafos^® 168/Irganos^® 1330 were more effective in colour protection and retarding the formation of oxidation products than the combinations of Irgafos^® 168/Irganox^® 3114 and Irgafos^® 168/Lowinox^® 1790. The effect of the addition of HALS, such as Tinuvin^® 770, Tinuvin^® 622 and Chimassorb^® 944, and a metal deactivator, such as Irganox^® MD 1024, to the combination of Irgafos^® 168/Irganox^® 1010 was found to be antagonistic. In photo-oxidation, a combination of Irganox^® 1010/Irgafos^® 168 protected the polymer efficiently, when the polymerisation of the polymer was finalised with adipic acid. When the polymerisation was finalised with BHT, a higher amount of hydroperoxides and oxidation products was found. An increase in the amount of antioxidants did not enhance the stability of the polymer. The addition of Alkanox^® P-24 exhibited an opposite effect to that seen in thermal oxidation, as the stabilisation efficiency was less effective than with Irgafos^® 168. The formulation containing Irgafos^® 168/Irganox^® 1010 was found to be the most efficient compared with the other phenolic antioxidants. The addition of Tinuvin^® 770 to the formulation Irgafos^® 168/Irganox^® 1010 was found to have a synergistic effect. The addition of polymeric HALS or Irganox^® MD 1024, a metal deactivator, had an antagonistic effect on the stabilisation of the polymer. Disruption of the excimer sites in the styrenic phase also correlated with stabilisation effects.     

Synthesis, structure, and isomerism of N-2,4-dinitrophenylbenzotriazoles

Both isomers of N-(2′,4′-dinitrophenyl)benzotriazole, the 1(3)- and the 2-substituted, have been characterized and their reciprocal isomerism was studied. Cross-experiments in the presence of 5(6)-nitro-1H-benzotriazole proved that the isomerization of 2-(2′,4′-dinitrophenyl)-2H-benzotriazole into the 1-isomer occurs by an intermolecular mechanism. The reported reaction of 5(6)-nitro-1H-benzotriazole with 1-chloro-2,4-dinitrobenzene has been reexamined discovering that there is an error in the proportions of N-substituted isomers. A possible explanation for the observed isomerizations was proposed. Identification of all compounds by multinuclear magnetic resonance, including solid-state studies, has been achieved.     

Semiempirical INDO/S calculations on the absorption spectrum of mono‐ and trinuclear vanadium(II) complexes

This work is concerned with prospective starting materials for the synthesis of larger molecules used as functional models of the substrate binding and reducing site of the vanadium nitrogenase. It is well known that the mononuclear adduct of vanadium(II) chloride with N,N,N′,N′‐tetramethylethylenediamine, henceforth referred to as [VCl₂(tmeda)₂], is a good starting material for the synthesis of trinuclear vanadium complexes. We now report the results of semiempirical calculations on the spectroscopy of [VCl₂(tmeda)₂] using the intermediate neglect of differential overlap (INDO) method. For the mononuclear complex, the ground state was calculated to be a quartet, about 45 kcal/mol below the doublet. For the positively charged trinuclear vanadium complex, [V₃(μ‐Cl)₃(μ₃‐Cl)₂(tmeda)₃]⁺, the ground state was calculated to be a decatet, about 47 kcal/mol below the octet. For both complexes the frontier orbitals are dominated by the vanadium 3d manifold, and accordingly the electronic spectra are dominated by d‐d* excitations within this manifold. The INDO/S‐calculated spectra are in good agreement with the observed UV‐visible spectra in both cases. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem 88: 245–251, 2002     

Amino acid sequence and D/L-configuration determination methods for D-amino acid-containing peptides in living organisms

D-amino acid-containing peptides with biological activities have been isolated from invertebrates and amphibians, and partial racemization of amino acid residues in mammalian peptides associated with aging and diseases have been discussed. Here, we review the amino acid configuration determination methods in these peptides and recent progress of simultaneous determination method for sequence and configuration of amino acid residues. The applicability of C-terminus sequence analysis and mass spectrometry to configuration determination of amino acids is also discussed.