Unexpected open-chain molecular structure of a titanocenyl-substituted dimethyl ether

Reaction of (η-C₅H₄CH₃)₂TiCl₂ with CH₃OCH₂MgCl yielded (η-C₅H₄-CH₃)₂Ti(Cl)CH₂OCH₃ (2a). Complex 2a crystallizes in space group P2₁/n with cell constants a 8.162(1), b 11.004(2), c 15.297(2) Å, β 96.40(1)°. In contrast to the three-membered metallacyclic zirconium compound of analogous composition (η-C₅H₅)₂Zr(Cl)CH₂OCH₃ (1), the titanocenyl-substituted ether 2a has an open-chain (η¹-O“-outside”) type structure.     

über Katalysatoren- und Fermentmodelle (1)

Ohne Zusammenfassung Die Arbeit wurde aus Mitteln des Marshall-Planes (ERP-Mittel) und mit Spenden aus dem „Fonds Chemie“ ausgeführt. Wir sprechen den zust?ndigen Stellen für die Gew?hrung der Beihilfe unseren verbindlichsten Dank aus. Der Deutschen Forschungsgemeinschaft danken wir für die überlassung einer Ultrazentrifuge, den Behring-Werken für die uns zur Verfügung gestellten Serumalbumin- und -globulin-Pr?parate.     

Effect of selenium oxidation state on cadmium translocation in chamomile plants

Syntheses and spectral characteristics of cadmium(II) compounds (CdSeO₄, CdSeO₃, and Cd(NCSe)₂(nia)₂) containing selenium in oxidation states (VI), (IV), and (-II) are described. In Cd(NCSe)₂(nia)₂, nicotinamide (nia) and selenocyanate anions are bonded to Cd atom as N-donor monodentate ligands. Nicotinamide is coordinated through the ring nitrogen atom. The effects of these selenium compounds as well as Cd(NCS)₂(nia)₂ on the growth and Cd accumulation in roots and shoots of hydroponically cultivated chamomile plants (cultivar Lutea) were studied. In the applied concentration range (12–60 μmol dm⁻³) Cd(NCS)₂(nia)₂ affected neither the length nor the dry mass of roots and shoots. Other compounds applied at 24 μmol dm⁻³ and 60 μmol dm⁻³ significantly reduced dry mass of roots and shoots. Selenium oxidation state in the cadmium compounds affected Cd accumulation in plant organs as well as Cd translocation within the plants, which was reflected in the values of bioaccumulation (BAF) and translocation factors (S/R). Cd amount accumulated by shoots was lower than that in the roots. The highest BAF values determined for Cd accumulation in shoots were obtained with CdSeO₄. Substitution of S with Se in the Cd(NCX)₂(nia)₂ (X = Se or S) caused an increase of Cd translocation into the shoots. Presented at the XVIIIth Slovak Spectroscopic Conference, Spišská Nová Ves, 15–18 October 2006.     

Validation of the density-functional based tight-binding approximation method for the calculation of reaction energies and other data

We investigated the performance of the approximative density functional method DFTB versus BLYP and G2 with respect to zero-point corrected reaction energies, vibrational frequencies, and geometry parameters for a set of 28 reactions and 22 representative molecules containing C, H, N, and O (DFTB--density-functional based tight-binding approximation). The DFTB reaction energies show a mean absolute deviation versus the G2 reference of 4.3 kcalmol only. The corresponding value for the vibrational frequencies amounts to 75 cm(-1) versus BLYP/cc-pVTZ. With very few exceptions bond lengths and angles are in excellent agreement with the results of higher-level methods.     

The structure of a model intermediate for the nickel-catalyzed cyclodimerization of allene

The stoichiometric reaction between allene, zerovalent nickel and a chelating diphosphane leads to the formation of a bis-methylenenickelacyclopentane derivative whose structure has been established by X-ray crystallography.     

Reactions of substituted furo[3,2-<Emphasis Type="Italic">b</Emphasis>]pyrrole-5-carboxhydrazides and their biological activity

The reactions of substituted furo[3,2-b]pyrrole-5-carboxhydrazides 1 with 5-arylfuran-2-carboxaldehydes 2, 4,5-disubstituted furan-2-carboxaldehydes 3 and thiophene-2-carboxaldehyde 4 has been studied. The advantage of microwave irradiation on some of these reactions was reflected in the reduced reaction time and increased yields. Reactions of 1 with 4-substituted 1,3-oxazol-5(4H)-ones 11 led to diacylhydrazines 13 or to imidazole derivatives 14 depending on the temperature. 1,2,4-Triazole-3-thione 17 was synthesized by two-step reaction of 1 with phenylisothiocyanate and subsequent base-catalyzed cyclization of thiosemicarbazide 16. The effects of hydrazones 5–10 on inhibition of photosynthetic electron transport in spinach chloroplasts and chlorophyll content in the antialgal suspensions of Chlorella vulgaris were investigated.     

Determination of aristolochic acid by capillary zone electrophoresis

A simple and rapid capillary zone electrophoresis (CZE) method for the determination of aristolochic acid (AA) in dietary supplements and selected herbs is described. A clear separation of AA from other sample constituents was achieved within 5 minutes without any sample clean up. A mixture of 20 mM-morpholinethanesulphonic acid+10 mM-BisTrisPropane+0.2% hydroxyethylcelullose in 10% methanol serves as a background electrolyte. The linearity, accuracy, intra-assay and detection limit of the developed method are 200–6000 ng/mL, 95–103%, 3.5%, and 50 ng/ml, respectively. Ease of use, sufficient sensitivity and low running cost are the most important attributes of the CZE method. The proposed CZE method was compared with HPLC.     

Structural and Chemical Analysis of Materials with High Spatial Resolution

 An understanding of the correlation between microstructures and properties of materials require the characterization of the material on many different length scales. Often the properties depend primarily on the atomistics of defects, such as dislocations and interfaces. The different techniques of transmission electron microscopy allow the characterization of the structure and of the chemical composition of materials with high spatial resolution to the atomic level: high resolution transmission electron microscopy allows the determination of the position of the columns of atoms (ions) with high accuracy. The accuracy which can be achieved in these measurements depends not only on the instrumentation but also on the quality of the transmitted specimen and on the scattering power of the atoms (ions) present in the analyzed column. The chemical composition can be revealed from investigations by analytical microscopy which includes energy dispersive X-ray spectroscopy, mainly quantitatively applied for heavy elements, and electron energy-loss spectroscopy. Furthermore, the energy-loss near-edge structure of EELS data results in information on the local band structure of unoccupied states of the excited atoms and, therefore, on bonding. A quantitative evaluation of convergent beam electron diffraction results in information on the electron charge density distribution of the bulk (defect-free) material. The different techniques are described and applied to different problems in materials science. It will be shown that nearly atomic resolution can be achieved in high resolution electron microscopy and in analytical electron microscopy. Recent developments in electron microscopy instrumentation will result in atomic resolution in the foreseeable future.     

Novel Redox-Active Cyclophanes Based on 3,3'-Biindolizines: Synthesis and Chirality

The first compounds of a new series of redox-active cyclophanes were prepared by dehydrocyclization of bridged indolizines of type 1. The bridged dipyridino-compounds 2a and 2b obtained by reaction of 2 mol of lithiated alpha-picolines with dihalides were used as starting materials. Subsequent treatment of 2a,b with 2 mol of alpha-bromo ketones gave quaternary pyridinium halides. Ring closure in an alkaline medium (Chichibabin reaction) yielded the starting material for the synthesis of the macrocycles. Oxidative C-C coupling gave the diastereomeric cyclophanes of type 3. In all cases one pair of the enantiomers was obtained in excess. CV-investigations have shown that the main products are reversible redox systems. To clarify their conformations, compounds 3c, 3d/1, and3d/2 were subjected to X-ray analysis.     

A Heuristic Decomposition Algorithm for Scheduling Problems on Mixed Graphs

We consider a scheduling problem where a set of n jobs has to be processed on a set of m machines and arbitrary precedence constraints between operations are given. Moreover, for any two operations i and j values a _ij >0 and a _ji >0 may be given where a _ij is the minimal difference between the starting times of operations i and j when operation i is processed first. Often, the objective is to minimize the makespan but we consider also arbitrary regular criteria. Even the special cases of the classical job shop problem J//C_max belong to the set of NP-hard problems. Therefore, approximation or heuristic algorithms are necessary to handle large-dimension problems. Based on the mixed graph model we give a heuristic decomposition algorithm for such a problem, i.e. the initial problem is partitioned into subproblems that can be solved exactly or approximately with a small error bound. These subproblems are obtained by a relaxation of a subset of the set of undirected edges of the mixed graph. The subproblems are successively solved and a proportion of the results obtained for one subproblem is kept for further subproblem definitions. Numerical results of the algorithm presented here are given.