Preparation of ω-tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides: Useful reagents for the synthesis of 1-(ω-mercaptoalkyl)-1,2-dihydrobuckminsterfullerenes (C60)

ω-Tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides are prepared as Grignard reagents containing protected mercaptoalkyl chains, which are useful for the direct introduction of ω-mercaptoalkyl chains to electrophiles. In order to prove the usefulness of these reagents, they were reacted with buckminsterfullerene (C₆₀) to give 1-(ω-mercaptoalkyl)-1,2-dihydrobuck minsterfullerenes after the deprotection of THP group with TFA.     

A hexacyclic ent-trachylobane diterpenoid possessing an oxetane ring from Mitrephora glabra

[chemical reaction: see text]. Three new ent-trachylobane diterpenoids (1-3) were isolated and structures elucidated from Mitrephora glabra Scheff. (Annonaceae). Mitrephorone A (1) possesses a hexacyclic ring system with adjacent ketone moieties and an oxetane ring, both of which are unprecedented among trachylobanes. All compounds were evaluated for cytotoxicity against a panel of cancer cells, where 1 displayed the most potent and broadest activity, and against a battery of antimicrobial assays, where all compounds were approximately equipotent.     

Densification and crystallisation of celsian glass derived from alkoxide gel

High density (98% of theoretical) was achieved at 900°C for an all-alkoxide derived bulk celsian gel prior to crystallisation. TEM indicated that crystallisation was dominated by volume nucleation and growth of hexagonal disc shaped hexacelsian. Kinetic studies using SEM indicate a maximum nucleation rate at 980°C and an activation energy for crystal growth of 566 KJ/mol. The high rates of densification and of nucleation are attributed to the high OH content in the gel-derived glass.     

Controlled growth of calcium carbonate by poly(ethylenimine) at the air/water interface

Two metastable calcium carbonate polymorphs, hemispherical vaterite and needle-like aragonite, are selectively formed at the air/water interface by the mediation of poly(ethyleneimine)(with molecular weights of 25000 and 2000, respectively) dissolved in supersaturated calcium bicarbonate solution.     

Suppressed beta-hydride elimination in palladium-catalyzed cascade cyclization-coupling reactions: an efficient synthesis of 3-arylmethylpyrrolidines

[formula: see text] A novel type of palladium-catalyzed cascade cyclization-coupling reaction that proceeds with suppressed beta-hydride elimination has been found. One of the N-sulfonyl oxygens is suggested to coordinatively stabilize an alkylpalladium intermediate, thus preventing the intermediate from the usual beta-elimination. This is the first sequential palladium-catalyzed coupling reaction where the Suzuki and Heck reactions can compete. The reaction provides an efficient synthetic route to 4-methylene-3-arylmethylpyrrolidines, which are not readily available by other routes.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

Raman scattering from Pt(CN)42− adsorbed on Pt colloids

Raman scattering from Pt(CN)₄^2? adsorbed on Pt colloids (average diameter of 16 A) is compared with the Raman signal from the same amount of Pt(CN)₄^2? in solution. The wavelength dependence of the adsorbate Raman intensity is measured from 308 to 647 nm and compared with a Lorenz/Mie calculation of the enhancement factor for the electromagnetic field intensity on the surface of a Pt sphere as a function of sphere radius and incident wavelength.     

Application of diaza-18-crown-6-capped beta-cyclodextrin bonded silica particles as chiral stationary phases for ultrahigh pressure capillary liquid chromatography

Two bonded chiral stationary phases (CSPs), 8-aminoquinoline-2-ylmethyl- and 8-aminoquinoline-7-ylmethyl-diaza-18-crown-6-capped [3-(2-O-beta-cyclodextrin)-2-hydroxypropoxy]propylsilyl silica particles (non-porous, 1.5 microm), have been prepared and evaluated using capillary liquid chromatography at high pressures (> or = 8000 p.s.i.). High column efficiency (up to 400 000 plates m(-1)) was achieved for chiral separations. These CSPs with two recognition sites, i.e. substituted-diaza-18-crown-6 and beta-cyclodextrin combined with high chromatographic efficiency provide good resolution of a variety of enantiomers and positional isomers in relatively short times under reversed-phase conditions. After inclusion of a Ni (II) ion from the mobile phase, the positively charged crown ether-capped beta-cyclodextrin facilitates specific static, dipolar, and host-guest complexation interactions with solutes.     

The s-p bonded representatives of the prominent BaAl4 structure type: a case study on structural stability of polar intermetallic network structures

This work presents a detailed, combined experimental and theoretical study on the structural stability of s-p bonded compounds with the BaAl4 structure type (space group I4/mmm, Z = 2) as part of a broad program to investigate the complex questions of structure formation and atomic arrangements in polar intermetallics. From ab initio calculations employing pseudopotentials and a plane wave basis set, we extracted optimized structural parameters, binding energies, and the electronic structure of the systems AeX(III)4, AeX(II)2X(IV)2, AeX(II)2X(III)2 (Ae = Ca, Sr, Ba; X(II) = Mg, Zn; X(III) = Al, Ga; X(IV) = Si, Ge). For all systems we found a pronounced pseudo-gap in the density of states separating network X42- bonding from antibonding electronic states that coincides with the Fermi level for an electron count of 14 electrons per formula unit, the optimum value for stable BaAl4-type polar intermetallics. However, the synthesis and structural characterization (from X-ray single crystal and powder diffraction data) of the new compounds AeZn2-Al2+, AeZn2-deltaGa2+delta (Ae = Ca, Sr, Ba; delta = 0-0.2) and AeMg0.9Al3.1, AeMg1.7Ga2.3 (Ae = Sr, Ba) manifested that electron deficiency is rather frequent for BaAl4-type polar intermetallics. The site preference for different "X" elements in the ternary systems was quantified by calculating "coloring energies", which, for some systems, was strongly dependent on the size of the electropositive Ae component. The Ae2+ cations decisively influence the nearest neighbor distances in the encapsulating polyanionic networks X4(2-) and the structures of these networks are surprisingly flexible to the size of the Ae component without changing the overall bonding picture. A monoclinically distorted variant of the BaAl4 structure occurs when the cations become too small for matching the size of encapsulating X4(2-) cages. An even larger size mismatch leads to the formation of the EuIn4 structure type.     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.