Fuzzy Impulsive Control of Permanent Magnet Synchronous Motors

The permanent magnet synchronous motors （PMSMs） may experience chaotic behaviours with systemic parameters falling into a certain area or under certain working conditions, which threaten the secure and stable operation of motor-driven. Hence, it is important to study the methods of controlling or suppressing chaos in PMSMs. In this work, the Takagi-Sugeno （T-S） fuzzy impulsive control model for PMSMs is established via the T-S modelling methodology and impulsive technology. Based on the new model, the control conditions of asymptotieal stability and exponential stability for PMSMs have been derived by the Lyapunov method. Finaily, an illustrated example is also given to show the effectiveness of the obtained results.     

Maximizing Thermal Entanglement of XY Model Using Site-Dependent Magnetic Fields in Specific Directions

We study the thermal entanglement by means of concurrence in a two-qubit isotropic XY model in the presence of site-dependent external magnetic fields in arbitrary directions. We find that at a given temperature and magnetic field strength, the mirror symmetry of the two fields about the x-y plane is a necessary condition for maximum entanglement. However, if there is no constraint on the field strengths, then the necessary condition for maximum entanglement reduces to the configuration that the two fields are vertical, anti-parallel and with the same strength. We also investigate the anisotropic XY model and find that the above conclusion more or less holds.     

The density wave in a new anisotropic continuum model

In this paper the new continuum traffic flow model proposed by Jiang et al is developed based on an improved car-following model, in which the speed gradient term replaces the density gradient term in the equation of motion. It overcomes the wrong-way travel which exists in many high-order continuum models. Based on the continuum version of car-following model, the condition for stable traffic flow is derived. Nonlinear analysis shows that the density fluctuation in traffic flow induces a variety of density waves. Near the onset of instability, a small disturbance could lead to solitons determined by the Korteweg-de-Vries （KdV） equation, and the soliton solution is derived.     

Concurrent correction of geometric distortion and motion using the map-slice-to-volume method in echo-planar imaging

The accuracy of measuring voxel intensity changes between stimulus and rest images in fMRI echo-planar imaging (EPI) data is severely degraded in the presence of head motion. In addition, EPI is sensitive to susceptibility-induced geometric distortions. Head motion causes image shifts and associated field map changes that induce different geometric distortion at different time points. Conventionally, geometric distortion is "corrected" with a static field map independently of image registration. That approach ignores all field map changes induced by head motion. This work evaluates the improved motion correction capability of mapping slice to volume with concurrent iterative field corrected reconstruction using updated field maps derived from an initial static field map that has been spatially transformed and resampled. It accounts for motion-induced field map changes for translational and in-plane rotation motion. The results from simulated EPI time series data, in which motion, image intensity and activation ground truths are available, show improved accuracy in image registration, field corrected image reconstruction and activation detection.     

Development of sound measurement systems for auditory functional magnetic resonance imaging

Auditory functional magnetic resonance imaging (fMRI) requires quantification of sound stimuli in the magnetic environment and adequate isolation of background noise. We report the development of two novel sound measurement systems that accurately measure the sound intensity inside the ear, which can simultaneously provide the similar or greater amount of scanner- noise protection than ear-muffs. First, we placed a 2.6 x 2.6-mm microphone in an insert phone that was connected to a headphone [microphone-integrated, foam-tipped insert-phone with a headphone (MIHP)]. This attenuated scanner noise by 37.8+/-4.6 dB, a level better than the reference amount obtained using earmuffs. The nonmetallic optical microphone was integrated with a headphone [optical microphone in a headphone (OMHP)] and it effectively detected the change of sound intensity caused by variable compression on the cushions of the headphone. Wearing the OMHP reduced the noise by 28.5+/-5.9 dB and did not affect echoplanar magnetic resonance images. We also performed an auditory fMRI study using the MIHP system and presented increase in the auditory cortical activation following 10-dB increment in the intensity of sound stimulation. These two newly developed sound measurement systems successfully achieved the accurate quantification of sound stimuli with maintaining the similar level of noise protection of wearing earmuffs in the auditory fMRI experiment.     

L-MBE法生长ZnO薄膜的退火研究

研究了空气退火对于激光分子束外延(L-MBE)法制备的ZnO薄膜光学及结构特性的影响,报道了采用小角度X射线分析(GIXA)技术对于ZnO薄膜退火前后的表面及界面状况的定量分析结果.RHEED衍射图样表明,薄膜经过380℃及600℃原位退火后,其表面仍然较为粗糙.而XRD在面(in-plane)Φ扫描结果显示出经过800℃空气退火之后,薄膜具有更好的外延取向性.GIXA分析结果表明,800℃退火后ZnO薄膜的表面方均根粗糙度从退火前的1.13 nm下降为0.37 nm;同时ZnO/Al2O3界面粗糙度从2.10 nm上升为2.59 nm.ZnO室温PL结果显示,退火后薄膜紫外近带边发光强度比退火前增大了40倍,并出现了源于电子－空穴等离子体(EHP)复合的N带受激发射峰,激发阈值约为200 kW/cm2.     

激光雷达探测北京城区夏季大气边界层

为了研究北京城区夏季大气边界层结构变化特征及大气边界层内气溶胶消光特性,2004年8月利用便携式米散射激光雷达对北京城区夏季大气边界层进行了系统观测。反演了观测站上空大气气溶胶的消光特性垂直分布以及大气边界层的高度。分析了气象条件和人类活动对大气边界层结构的影响。观测数据表明： 北京城区夏季大气边界层有明显的日变化特征,早晚比较低,日间有一个从低变高再变低的过程,中午前后达到最高。结合气象参数对测量数据进行的统计分析表明：北京城区夏季大气边界层高度相对稳定,多分布在1.8km以下,平均值为0.68km;大气边界层内存在浓度较高的气溶胶粒子,平均光学厚度（3km以内）在0.30左右。     

Temperature and injection current dependent electroluminescence study of GaInP/AlGaInP quantum well laser diode grown using tertiarybutylarsine and tertiarybutylphosphine

GaInP/AlGaInP triple quantum well (TQW) lasers, grown by metalorganic chemical vapor deposition (MOCVD) using tertiarybutylarsine (TBAs) and tertiarybutylphosphine (TBP), were fabricated with a pulsed anodic oxidation (PAO) process. The devices worked at room temperature (RT) with the lowest threshold current density (J_th) of 1.5 kA/cm² ever reported for GaInP/AlGaInP lasers grown using TBAs and TBP. Temperature dependent (35–250 K) electroluminescence (EL) study of the GaInP/AlGaInP laser diode showed almost the same luminescence quenching behavior at a high temperature region (120–250 K), independent of the injection current (100–150 mA). A model involving a nonradiative recombination mechanism was presented to interpret the EL quenching behavior over the experimental temperature range. The nonradiative recombination centers in the Al-containing barrier or cladding layer are believed to contribute to the loss of carriers via nonradiative recombination. PACS 78.60.Fi; 71.20.Nr; 78.67.De; 81.15.Gh; 42.55.Px     

Pulsed laser deposition of high-quality ZnO films using a high temperature deposited ZnO buffer layer

High-quality ZnO film growth on sapphire was achieved by pulsed laser deposition using a high temperature deposited ZnO buffer layer. This high temperature deposited buffer layer remarkably improves crystallinity of subsequent films. In particular, the full width at half-maximum of X-ray diffraction ω-rocking curves for ZnO films grown with the buffer layer is 0.0076° (27.36 arcsec) and 0.1242° (447.12 arcsec) for the out-of-plane (002) and in-plane (102) reflections, respectively. In addition, ZnO films grown with this buffer layer showed a carrier mobility of 88 cm²/V s, which is three times higher than that realized for ZnO films grown without the buffer layer. The room temperature photoluminescence spectra showed strong band edge emission with little or no defect-related visible emission. PACS 78.55.Et; 81.05.Dz     

火焰原子吸收法研究纳米钛酸锶钡粉体对铅的吸附性能

以氯化钡、氯化锶和四氯化钛为原料,以草酸作共沉淀剂,采用化学共沉淀法制备了纳米复盐吸附剂——钛酸锶钡粉体,并利用TEM,XRD和FTIR进行了表征。以火焰原子吸收为检测手段,详细考察了该纳米吸附剂对水中铅的吸附性能。结果表明：该法合成的钛酸锶钡粉体外形以棒状为主,平均粒径为36 nm,为纯净的钙钛矿纳米粉体。该纳米粉体对水中的铅具有较强的吸附能力,吸附量受介质的pH值影响较大,当pH值为6.0时,该吸附剂对水中铅的吸附容量可达13 mg·g-1。吸附于纳米钛酸锶钡上的铅可用0.5 mol·L-1的硝酸完全解脱。建立了纳米钛酸锶钡粉体吸附富集,火焰原子吸收法测定水中痕量铅的新方法,该法检出限为11 μg·L-1,相对标准偏差为2.6%。用于地表水中铅的测定,结果满意。