Elastic constants of the alloys Cd1−x Zn x (x<0.3%) and their temperature dependence

The temperature dependence of elastic constants of Cd_1–x Zn _x alloys, havingx=0.021, 0·042 and 0·233 at.%, has been measured in the temperature range from 4·2 to 300 K by the pulse-echo-overlap ultrasonic method. The adiabatic compressibilities and the Debye temperatures have been calculated. All elastic constants with the exception ofc ₄₄ increase slightly with the growing concentration of Zn.The summary of this paper was presented on the 7^th Conference on Ultrasonic Methods in ilina, September 11^th–13^th, 1980.     

Self-diffusion of V-48 in the FeV σ-phase and in an Fe-47 wt.% V solid solution

Self-diffusion coefficients of vanadium in the FeV -phase and in the corresponding -solid solution (Fe-47 wt.% V) measured in the temperature ranges 1002–1115 °C (-phase) and 1230–1320 °C are reported. The found results differ fundamentally and significantly from the relations in ordered and disordered solid solutions [9]. The diffusivity in -phase at the transition temperature (T _/=1200 °C) is cca 14 times lower than the diffusivity in the b.c.c. solid solution, the chemical composition of which is the same. The lowering is caused by the different values of frequency factors,D _O=0.11 cm²/s andD _O=45 cm²/s. The effect of the corresponding activation enthalpiesH =252 kJ/mole andH =293 kJ/mole is small and quite opposite. The occurence of higher activation enthalpyH in the -solid solution at temperaturesT>T _/ may be attributed to a certain amount of the f.c.c. phase coexisting in the b.c.c. matrix at concentrationsc _v>27 wt.% at sufficiently high temperatures [7]. A comparison of vanadium self-diffusion characteristics measured in the -phase to the extrapolated values obtained on the basis of the previous measurements [1] in the Fe-V primary solid solutions ₁ shows that the diffusivity ratioD ₁/D (1473 K)=33 and that the activation enthalpyH is by about 3% higher than the valuesH ₁ (eq. (5)) measured in the uniphase b.c.c. solid solutions.     

Kinetics of the hydrogen electrode reactions of platinum in the NaHSO4 + KHSO4 eutectic melt

The kinetics of the hydrogen electrode reactions on Pt in the NaHSO₄ + KHSO₄ melt at ca. 185°C is studied. Under potentiodynamic conditions both the anodic and cathodic processes can be interpreted with the hydrogen electrode reaction mechanism already known. At potentials more negative than 0.1 V (vs. Ag/Ag⁺ (0.06 M)) the mechanism of the cathodic reaction changes because of a sulphide species formed on the electrode which is produced by a reduction of the melt components.     

Mercury Speciation in Fish by High-Performance Liquid Chromatography (HPLC) and Post-Column Ultraviolet (UV)-Photochemical Vapor Generation (PVG): Comparison of Conventional Line-Source and High-Resolution Continuum Source (HR-CS) Atomic Absorption Spectrometry (AAS)

An ultraviolet-photochemical generator (UV-PVG) capable of post-column on-line transformation of both organic and inorganic mercury species to cold vapor (Hg⁰) with subsequent detection by quartz tube-atomic absorption spectrometry (QT-AAS) was developed. Mercury(II), methylmercury(I), ethylmercury(I), and phenylmercury(I) were successfully detected after separation by reversed-phase high-performance liquid chromatography (RP-HPLC). Two types of AAS detectors were compared. The first was a commonly used line-source instrument while the second was a high-resolution continuum source (HR-CS) AAS. The latter provided better limits of detection: 0.47?µg?L^?1 for Hg(II), 0.84?µg?L^?1 for methylmercury(I), 0.80?µg?L^?1 for ethylmercury(I), and 2.0?µg?L^?1 for phenylmercury(I). The repeatability at 30?μg?L^?1 was 3.6%, 4.1%, 6.2%, and 4.5% for these species (n?=?10). These figures of merit were comparable with those reported for more sensitive atomic fluorescence spectrometry. Nine sample extraction procedures were investigated. Extraction by tetramethylammonium hydroxide and HCl at 75?°C was selected as the only method compatible with the proposed separation and detection steps providing high extraction efficiency and no changes in mercury speciation. The applicability of the proposed high-performance liquid chromatography–ultraviolet-photochemical vapor generation–quartz tube-atomic absorption spectrometry method was demonstrated using fish samples and certified reference materials (CRM) DOLT-4 (dogfish liver) and ERM-CE464 (tuna fish). The results were comparable to those obtained by a reference method based on L-cysteine extraction and high-performance liquid chromatography–inductively coupled plasma-mass spectrometry (HPLC–ICP-MS) determination.     

Determination of extractable chromium(VI) in the presence of large excess of chromium(III) in solid materials

Summary A method for the determination of chromium(VI) in solid materials with a Cr(VI) content at ppm level in the presence of ca. 10% Cr(III) has been devised. Chromium(VI) is extracted with 0.1M NaOH in a double-water bath (97° C) for 90 min. Differential-pulse polarography in 1M NaOH and spectrophotometry with 1,5-diphenylcarbazide have been tested for use in the final determination of Cr(VI). After extraction in the form of dithiocarbamate into methylisobutylketone or ethylacetate, chromium was determined by flame AAS and DPP in an organic extract.     

A comparison of cellactose with two ad hoc processed lactose-cellulose blends as direct compression excipients

Three processed lactose-cellulose blends of similar composition, particle size and true density were compared as direct compression excipients: one was prepared by dry granulation, one by extrusion-spheronization, and the commercial product Cellactose. Differences among their flow properties depended solely on their different sphericities. Unlike those of the other blends, Cellactose particles exhibited numerous macropores. The mean yield pressures of all three blends were similar to those of direct compression lactoses. Cellactose tablets prepared at a punch pressure that largely eliminated macropores (pores >1 microm) had better mechanical properties but much poorer disintegration than tablets of the other blends prepared at the same punch pressure. However, the tensile strength and disintegration time of Cellactose tablets both fell rapidly as macropore volume was increased by reducing punch pressure, while the enthalpy of wetting/dissolution rose. The strength and water-resistance of well-compacted Cellactose tablets is attributed to the spatial distribution of lactose and cellulose in Cellactose particles, rather than to beta-lactose content or extra-particular structural features.     

Polyoxometalates as Inorganic Building Blocks of Multifunctional Molecular Materials

The use of polyoxometalates (pOM's) as inorganic component in the synthesis of new molecular hybrid materials is presented. Here we show that the combination of organic molecules of the tetrathiafulvalene (TTF) type or perylene (per) with POM's yields new radical salts with unprecedented structures that present interesting magnetic and/or electrical properties or coexistence of both. The first true metallic radical salt containing a POM has been prepared and characterized. We also describe the recent results obtained by combining magnetic POM's with the organometallic cation decamethylferrocene.     

Synthesis and characterization of dinuclear ruthenium complexes covalently linked to Ru(II) tris-bipyridine: an approach to mimics of the donor side of photosystem II

To mimic the electron-donor side of photosystem II (PSII), three trinuclear ruthenium complexes (2, 2a, 2b) were synthesized. In these complexes, a mixed-valent dinuclear Ru2(II,III) moiety with one phenoxy and two acetato bridges is covalently linked to a Ru(II) tris-bipyridine photosensitizer. The properties and photoinduced electron/energy transfer of these complexes were studied. The results show that the Ru2(II,III) moieties in the complexes readily undergo reversible one-electron reduction and one-electron oxidation to give the Ru2(II,III) and Ru2(III,III) states, respectively. This could allow for photooxidation of the sensitizer part with an external acceptor and subsequent electron transfer from the dinuclear ruthenium moiety to regenerate the sensitizer. However, all trinuclear ruthenium complexes have a very short excited-state lifetime, in the range of a few nanoseconds to less than 100 ps. Studies by femtosecond time-resolved techniques suggest that a mixture of intramolecular energy and electron transfer between the dinuclear ruthenium moiety and the excited [Ru(bpy)3]2+ photosensitizer is responsible for the short lifetimes. This problem is overcome by anchoring the complexes with ester- or carboxyl-substituted bipyridine ligands (2a, 2b) to nanocrystalline TiO2, and the desired electron transfer from the excited state of the [Ru(bpy)3]2+ moiety to the conduction band of TiO2 followed by intramolecular electron transfer from the dinuclear Ru2(II,III) moiety to photogenerated Ru(III) was observed. The resulting long-lived Ru2(III,III) state decays on the millisecond timescale.     

RP-HPLC analysis of phenolic compounds and flavonoids in beverages and plant extracts using a CoulArray detector

Methods were developed for the analysis of natural antioxidants including phenolic compounds and flavonoids in beverages and plant extracts using gradient HPLC with multi-channel electrochemical coulometric detection. Suitability of various reversed-phase columns for this purpose was compared; pH and mobile phase gradients were optimized with respect to the separation selectivity and sensitivity of detection. Because of different target compounds in various sample types, the overlapping resolution maps and the normalized resolution product approaches described earlier were used to select optimum columns and gradients to suit the analysis of the individual sample types. The methods were applied to the analysis of phenolic compounds and flavonoids in beer, wine, tea, and yacon extracts. 32 phenolic compounds were identified and determined, including derivatives of benzoic and cinnamic acids, flavones, and a few related glycosides. Eight-channel CoulArray detection offers high selectivity and sensitivity with limits of detection in the low microg L(-1) range, at least an order of magnitude lower than single-channel coulometric detection using the Coulochem detector. No special sample pretreatment is necessary and, because of the compatibility of the CoulArray detector with gradient elution, phenolic antioxidants of different polarities can be determined in a single run. In addition to the retention times, the ratios of the areas of the pre-dominant and post-dominant peaks to the area of the dominant peak can be used for improved identification of natural antioxidants.