Experimental and theoretical studies of charge transfer and deuterium ion transfer between D2O+ and C2H4

The charge transfer and deuterium ion transfer reactions between D(2)O(+) and C(2)H(4) have been studied using the crossed beam technique at relative collision energies below one electron volt and by density functional theory (DFT) calculations. Both direct and rearrangement charge transfer processes are observed, forming C(2)H(4) (+) and C(2)H(3)D(+), respectively. Independent of collision energy, deuterium ion transfer accounts for approximately 20% of the reactive collisions. Between 22 and 36 % of charge transfer collisions occur with rearrangement. In both charge transfer processes, comparison of the internal energy distributions of products with the photoelectron spectrum of C(2)H(4) shows that Franck-Condon factors determine energy disposal in these channels. DFT calculations provide evidence for transient intermediates that undergo H/D migration with rearrangement, but with minimal modification of the product energy distributions determined by long range electron transfer. The cross section for charge transfer with rearrangement is approximately 10(3) larger than predicted from the Rice-Ramsperger-Kassel-Marcus isomerization rate in transient complexes, suggesting a nonstatistical mechanism for H/D exchange. DFT calculations suggest that reactive trajectories for deuterium ion transfer follow a pathway in which a deuterium atom from D(2)O(+) approaches the pi-cloud of ethylene along the perpendicular bisector of the C-C bond. The product kinetic energy distributions exhibit structure consistent with vibrational motion of the D-atom in the bridged C(2)H(4)D(+) product perpendicular to the C-C bond. The reaction quantitatively transforms the reaction exothermicity into internal excitation of the products, consistent with mixed energy release in which the deuterium ion is transferred in a configuration in which both the breaking and the forming bonds are extended.     

Parallel separations of oligonucleotides with optically gated sample introduction on multichannel microchips

With the release of the human genome sequence, there has been increasing attention given to other genetic analyses, including the detection of genetic variations and fast sequencing of multiple samples for pharmacogenomics studies. Rapid injections of samples in multiplexed separation channels by optically gated sample introduction are shown here for DNA separation. Serial separations of four amino acids are shown in less than four seconds on a microchip with four multiplexed channels. Five short oligonucleotides have also been rapidly separated in 2% LPA with four channels using this technique. In addition, multiple unique samples have been simultaneously separated and five-base resolution has been demonstrated.     

A novel effective electrophile: β-trifluoroacetylketene diphenyldithioacetal S,S-tetroxide

A synthesis of a novel electrophilic reagent--β-trifluoroacetylketene diphenyldithioacetal S,S-tetroxide 3 is described. The reaction of 3 with various electron-rich aromatics such as 1,3-dimethoxybenzene, 2-methylthiophene, N-methylpyrrole, and 2-methylindole was investigated. In the course of these reactions an unusual migration of a phenylsulfonyl group takes place. An easy and ready for scale-up procedure for the synthesis of previously unknown β-aryl, α-phenylsulphonyl substituted α,β-unsaturated trifluoromethyl ketones is reported.     

One-pot synthesis of cyclic enecarbamates from lactam carbamates

A general, practical and efficient one-pot synthesis of cyclic enecarbamates is described. The protocol proceeds via reduction of lactam carbamate with Super-Hydride^®, followed by in situ dehydration with trifluoroacetic anhydride (TFAA) and diisopropylethylamine (DIPEA).     

Speciation of cationic selenium compounds in Brassica juncea leaves by strong cation-exchange chromatography with inductively coupled plasma mass spectrometry

Strong cation-exchange chromatography (SCX-HPLC) was used in conjunction with inductively coupled plasma mass spectrometry (ICP-MS) to investigate cationic selenium species present in leaf extract of wild-type Brassica juncea supplemented with selenite. Total amount of Se accumulated by the leaves was found to be 352 microg g(-1). Cation-exchange solid-phase extraction (SCX-SPE) was used to pre-concentrate the cationic species present in the leaf extract. Methylselenomethionine (MeSeMet) and dimethylselenoniumproprionate (DMSeP) were synthesized and characterized by electrospray quadrupole time-of-flight MS (ESI-QTOF-MS). Laboratory synthesized and commercially available standards were used in chromatographic studies to identify the Se species in the leaf extract through retention time comparisons and standard addition method. Major cationic selenium species identified in the present study were MeSeMet and methylselenocysteine (MeSeCys) while selenomethionine (SeMet) was found in minor quantities.     

Nucleation and growtn of polythiophene films on gold electrodes

The nucleation and growth of polythiophene films on gold electrodes has been studied using potentiostatic steps. The mechanism has been deduced and estimates made of the kinetic parameters. Dissolution of the gold substrate at potentials where thiophene polymerisation occurs is suppressed by the initial rapid formation of a monolayer of polymer. The data indicate that formation of bulk film occurs by the instantaneous nucleation and three-dimensional growth of polymer on top of this monolayer. Rate constants for growth parallel to the surface on the bare gold substrate and the covering polymer layer are surprisingly very similar. Growth perpendicular to the surface is slightly more rapid, typically by a factor of 1.5–3, although it is less dependent on potential. The high density of nuclei results in their overlap at an early stage, after which growth is only possible perpendicular to the surface. Within a narrow potential range, the observation of maxima and minima in current-time transients is interpreted in terms of the “death” and “rebirth” of growing centres.     

Electropolymerization of aminophthalic acids. I. Polymerization of 4-aminophthalic acid

4-Aminophthalic acid has been polymerized in almost quantitative yield to low molecular weight polymer by electrochemical initiation at a platinum anode. Systems involving the acid, amine salt, and the ammonium salt have been explored; the acid and/or the amine salt of the acid provides the best means of obtaining polymer. Maximum molecular weight is attained in a very short time at low current densities (～2 hr at 50 mA). Thermogravimetric data indicate a temperature stability comparable to polyamide-imide polymers (400°C). Long reaction times and high current densities decrease molecular weight and polymer yield.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.     

Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.     

Capillary gas chromatographic separation of C10–C12 secondary phenylalkanes on modified cyclodextrin stationary phases

The separation of isomers and enantiomers of branched C₁₀-C₁₂ phenylalkanes by gas chromatography on fused silica capillary columns coated with some modified β- and γ-cyclodextrins was studied. It was shown that the separation of positional isomers of C₁₀-C₁₂ phynylalkanes on modified cyclodextrin capillary columns is not better than that on a column coated with modified polyethylene glycol. Differences were found in the enantioselectivity of modified β- and γ-cyclodextrins for the separation of C₁₀-C₁₂ secondary phenylalkane enantiomers. While alkylderivatives of β-CDs resolve enantiomers of 3-phenylalkanes, alkyl derivatives of γ-CD resolve enantiomers of 2-phenylalkanes. Since shape selectivity factors of modified cyclodextrins have indicated no inclusion of the considered solutes in cyclodextrin cavities, enantioselective interactions most probably occur on the outer sphere of cyclodextrins.