A fluidized bed process for electron sterilization of powders

A small capacity (100 g.s⁻¹) pilot system is described for presentation of powders and fine aggregates at high velocity, to an electron beam. Electron beam dose rate is continuously monitored in real time, while the thickness of the fluidized bed used to pneumatically transport the product can be monitored and controlled using beta-gauge techniques. Using electron paramagnetic resonance (EPR) techniques, alanine power mixed with the product is used for precise determination of dose delivered to the powder stream. Thin film dosimeters transported in the bed are also used for dose determination. Results with a variety of products are presented using both dose rate and velocity as the independent variables. Lethality data for the bioburdens present in several powdered foodstuffs are discussed.     

Characterization and properties of low-linear-density polyethylene/Typha latifolia composites

The characterization of the effects of different sizes and loadings of Typha latifolia on the tensile, thermal, and morphological properties of linear-low-density polyethylene (LLDPE)/T. latifolia composites were evaluated using tensile test, Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy analyses. Results indicated the tensile strength and elongation at break decreased as T. latifolia loading increased. However, T. latifolia fine size (fs) exhibited better tensile properties than coarse size at the same loading in the composite. T. latifolia (15%, fs) recorded higher thermal stability than LLDPE control and other T. latifolia loadings and sizes due to the strong interaction of T. latifolia (15%, fs) in LLDPE matrix as shown in morphology.     

High electrical conductivity for the partially oxidised d8 Ru–Ru bonded chain [Ru(bpy)(CO)2]n (bpy = 2,2′-bipyridine) and its wide range redox control

High, electrochemically controlled electrical conductivity (0.2–0.3 S cm^?1) was measured for the first time for the metal–metal bonded polymeric compound [Ru(bpy)(CO)₂]_n (bpy = 2,2′-bipyridine). The conductivity depended on the degree of partial oxidation of the initially zero-valent Ru to Ru^I in the chains and was found to increase by four orders of magnitude after 5% oxidative doping. Linear conductance vs. doping level dependence was found for low levels and the conductivity of films could repeatedly be switched on and off. The conduction process is ascribed to charge delocalisation on the Ru chains in analogy to that of other similar chains formed by stacking of planar transition metal d⁸ complexes.     

Sample preparation techniques for the determination of trace residues and contaminants in foods

The determination of trace residues and contaminants in complex matrices, such as food, often requires extensive sample extraction and preparation prior to instrumental analysis. Sample preparation is often the bottleneck in analysis and there is a need to minimise the number of steps to reduce both time and sources of error. There is also a move towards more environmentally friendly techniques, which use less solvent and smaller sample sizes. Smaller sample size becomes important when dealing with real life problems, such as consumer complaints and alleged chemical contamination. Optimal sample preparation can reduce analysis time, sources of error, enhance sensitivity and enable unequivocal identification, confirmation and quantification. This review considers all aspects of sample preparation, covering general extraction techniques, such as Soxhlet and pressurised liquid extraction, microextraction techniques such as liquid phase microextraction (LPME) and more selective techniques, such as solid phase extraction (SPE), solid phase microextraction (SPME) and stir bar sorptive extraction (SBSE). The applicability of each technique in food analysis, particularly for the determination of trace organic contaminants in foods is discussed.     

Biflavone glucosides from Ginkgo biloba yellow leaves

Phytochemical investigation of Ginkgo biloba (Ginkgoaceae) has resulted in the isolation of two new biflavone glucosides, ginkgetin 7'-O-beta-D-glucopyranoside (1) and isoginkgetin 7-O-beta-D-glucopyranoside (2). The structures were determined on the basis of chemical and spectroscopic evidences.     

Determination of senkirkine and senecionine in Tussilago farfara using microwave-assisted extraction and pressurized hot water extraction with liquid chromatography tandem mass spectrometry

Tussilago farfara (Kuan Donghua) is an important Chinese herbal medicine which has been shown to contain many bioactive compounds and widely used to relieve cough and resolve phlegm. However, besides therapeutic bioactive compounds, this herb has been found to contain toxic pyrrolizidine alkaloids (PAs), mainly senkirkine and traces of senecionine. In this report, conditions for microwave-assisted extraction (MAE) and pressurized hot water extraction (PHWE) were optimized for the extraction of the PAs. The results were compared against heating under reflux. It was found that the binary mixture of MeOH:H₂O (1:1) acidified using HCl to pH 2-3 was the optimal solvent for the extraction of the PAs in the plant materials. Liquid chromatography (LC) with ultra-violet (UV) detection and electrospray ionization mass spectrometry (ESI-MS) in the positive mode was used for the determination and quantitation of senkirkine and senecionine in the botanical extract. The proposed extraction methods with LC/MS allow for the rapid detection of the major and the minor alkaloids in T. farfara in the presence of co-eluting peaks. With LC/MS, the quantitative analysis of PAs in the extract was done using internal standard calibration and the precision was found to vary from 0.6% to 5.4% on different days. The limits of detection (LODs) and limits of quantitation (LOQs) for MAE and PHWE were found to vary from 0.26 μg/g to 1.04 μg/g and 1.32 μg/g to 5.29 μg/g, respectively. The method precision of MAE and PHWE were found to vary from 3.7% to 10.4% on different days. The results showed that major and minor alkaloids extracted using MAE and PHWE were comparable to that by heating under reflux. Our data also showed that significant ion suppression was not observed in the analysis of senkirkine and senecionine in the botanical extracts with co-eluting peaks.     

Mutagenesis of morphinone reductase induces multiple reactive configurations and identifies potential ambiguity in kinetic analysis of enzyme tunneling mechanisms

We have identified multiple reactive configurations (MRCs) of an enzyme-coenzyme complex that have measurably different kinetic properties. In the complex formed between morphinone reductase (MR) and the NADH analogue 1,4,5,6-tetrahydro-NADH (NADH4) the nicotinamide moiety is restrained close to the FMN isoalloxazine ring by hydrogen bonds from Asn-189 and His-186 as determined from the X-ray crystal structure. Molecular dynamic simulations indicate that removal of one of these hydrogen bonds in the N189A MR mutant allows the nicotinamide moiety to occupy a region of configurational space not accessible in wild-type enzyme. Using stopped-flow spectroscopy, we show that reduction of the FMN cofactor by NADH in N189A MR is multiphasic, identifying at least four different reactive configurations of the MR-NADH complex. This contrasts with wild-type MR in which hydride transfer occurs by environmentally coupled tunneling in a single kinetic phase [Pudney et al. J. Am. Chem. Soc. 2006, 128, 14053-14058]. Values for primary and alpha-secondary kinetic isotope effects, and their temperature dependence, for three of the kinetic phases in the N189A MR are consistent with hydride transfer by tunneling. Our analysis enables derivation of mechanistic information concerning different reactive configurations of the same enzyme-coenzyme complex using ensemble stopped-flow methods. Implications for the interpretation from kinetic data of tunneling mechanisms in enzymes are discussed.     

Poly(diphenylacetylene)s with Electron‐Donating Alkoxy and Electron‐Withdrawing Fluoroalkyl Groups: Effect of the Substituent on Fluorescence

New poly(diphenylacetylene)s with alkoxy and fluoroalkyl groups as electron‐donating and electron‐withdrawing groups, respectively, were synthesized by using a WCl₆‐n‐Ph₄Sn catalyst. The polymer solutions emitted strong, bluish‐green lights when photo‐excited. The polymers that contained the electron‐donating alkoxy groups showed longer fluorescence‐maximum peaks when compared to the polymers that contained the electron‐withdrawing fluoroalkyl groups. However, such an effect of the substituent on the absorption property was not clearly seen. The emission bands of the solid films did not show any significant red shift, relative to that of the dilute solution.

     

Axial and equatorial ligand effects on biomimetic cysteine dioxygenase model complexes

Density functional theory (DFT) calculations are presented on biomimetic model complexes of cysteine dioxygenase and focus on the effect of axial and equatorial ligand placement. Recent studies by one of us [Y. M. Badiei, M. A. Siegler and D. P. Goldberg, J. Am. Chem. Soc. 2011, 133, 1274] gave evidence of a nonheme iron biomimetic model of cysteine dioxygenase using an i-propyl-bis(imino)pyridine, equatorial tridentate ligand. Addition of thiophenol, an anion - either chloride or triflate - and molecular oxygen, led to several possible stereoisomers of this cysteine dioxygenase biomimetic complex. Moreover, large differences in reactivity using chloride as compared to triflate as the binding anion were observed. Here we present a series of DFT calculations on the origin of these reactivity differences and show that it is caused by the preference of coordination site of anion versus thiophenol binding to the chemical system. Thus, stereochemical interactions of triflate and the bulky iso-propyl substituents of the ligand prevent binding of thiophenol in the trans position using triflate. By contrast, smaller anions, such as chloride, can bind in either cis or trans ligand positions and give isomers with similar stability. Our calculations help to explain the observance of thiophenol dioxygenation by this biomimetic system and gives details of the reactivity differences of ligated chloride versus triflate.     

Supramolecular assembly of strongly chemisorbed size- and shape-defined chiral clusters: S- and R-alanine on Cu(110)

The bonding and self-assembly of a chirally organized monolayer of alanine on the Cu(110) surface has been investigated using reflection-absorption infrared spectroscopy, low-energy electron diffraction (LEED), and scanning tunneling microscopy (STM). This multitechnique approach has enabled an in-depth understanding of the hierarchy of chirality transfer: from a single adsorbed molecule, to size-defined chiral clusters, and then to an overall chiral assembly. The data have indicated that the alanine is in its anionic form, bound to the copper surface through the oxygens of the ionized carboxylate group and the nitrogen of the neutral amino group. Importantly, the methyl group is held away from the surface, resulting in direct chirality transfer into the footprint of the adsorbed alanine molecules, with the local adsorption motif for S-alanine being the mirror image of that created for R-alanine. STM has shown that S-alanine molecules self-organize to form size-defined chiral clusters of six or eight molecules at the surface, interspersed with chiral channels of bare metal. Together, these clusters and channels further self-assemble into a chiral array with one unique chiral domain sustained across the entire surface. A similar chiral assembly, but with the mirror organization, has been observed for R-alanine. Structural models for the individual clusters are proposed, and in conjunction with LEED data, overall models for these chiral phases of both S- and R-alanine have been constructed. Overall, this adsorption system has been found to be both strongly chemisorbed and capable of extensive intermolecular H-bonding, causing stresses that lead not only to the chiral self-organization of molecules but also to a specific self-organization of the empty chiral channels and spaces that intersperse the structure which, in turn, chirally assemble across macroscopic length scales to give a surface with global organizational chirality.