Efficient flow injection and sequential injection methods for spectrophotometric determination of oxybenzone in sunscreens based on reaction with Ni(II)

Spectrophotometric determination of a widely used UV-filter, such as oxybenzone, is proposed. The method is based on the complexation reaction between oxybenzone and Ni(II) in ammoniacal medium. The stoichiometry of the reaction, established by the Job method, was 1:1. Reaction conditions were studied and the experimental parameters were optimized, for both flow injection (FI) and sequential injection (SI) determinations, with comparative purposes. Sunscreen formulations containing oxybenzone were analyzed by the proposed methods and results compared with those obtained by HPLC. Data show that both FI and SI procedures provide accurate and precise results. The ruggedness, sensitivity and LOD are adequate to the analysis requirements. The sample frequency obtained by FI is three-fold higher than that of SI analysis. SI is less reagent-consuming than FI.     

Surface passivation of luminescent colloidal quantum dots with poly(dimethylaminoethyl methacrylate) through a ligand exchange process

Polydimethylaminoethyl methacrylate (PDMAEMA) was used as a multidentate ligand to modify the surface of CdSe/ZnS core-shell colloidal quantum dots in toluene with trioctylphosphine oxide (TOPO) as the surface ligand. Adsorption of PDMAEMA was accompanied by release of TOPO. The process is free of agglomeration, and the modified nanocrystals become soluble in methanol. The photoluminescence properties are well-preserved in either toluene or methanol.     

Cooperativity, partially bound states, and enthalpy-entropy compensation

Efforts to develop a quantitative understanding of molecular recognition rely on the additivity of individual intermolecular interactions, and cooperativity represents one of the major potential stumbling blocks. A chemical double-mutant cycle has been used to experimentally measure cooperativity between functional group interactions within a complex framework. The interaction between two aromatic groups varies by 0.2 +/- 0.4 kJ mol(-1) in synthetic H-bonded complexes that differ by 8-13 kJ mol(-1) in overall stability. In these systems, the free energies associated with individual intermolecular interactions can therefore be reliably treated in an additive fashion. The results suggest that alternative explanations should be considered for cooperative phenomena observed in other systems, and a rationale based on the population of partially bound states in flexible molecules is proposed to account for the enthalpic chelate effect and enthalpy-entropy compensation.     

Time-resolved spectroscopy of solid poly(1-vinyl naphthalene)following electron beam pulse radiolysis: pulse radiolytic studies on polymers

Transient emission studies following pulse radiolysis of solid poly(1-vinyl naphthalene) show existence of excited monomers and two excimers. Quenching experiments indicate that excimers are not formed directly by recombination of ions but probably by trapping of migrating monomeric excitation in performed traps whose density is approximately one in 10³.     

Determination of selenium, zinc and cadmium in antidandruff shampoos by atomic spectrometry after microwave assisted sample digestion

Microwave assisted pre-treatments for atomic spectrometric determination (inductive coupled plasma-optical emission spectrometry, ICP-OES or flame atomic absorption spectrometry, FAAS) of metallic elements, usually present in antidandruff shampoos, are proposed. They are based on the digestion of the sample with HNO₃ into a closed reactor, which is irradiated at 800 W for a few minutes. Selenium was determined by ICP-OES. The limit of detection was 0.11 mg l⁻¹; the relative standard deviation (R.S.D.) for the selenium content in the samples was in the 0.6–3.6% range. The results obtained were in agreement with the label contents and the recovery of the proposed method was in the 100–106% range. Zinc and cadmium were determined by FAAS. The limit of detection for zinc determination was 0.078 mg l⁻¹; the R.S.D. for zinc contents was in the 0.8–8.6% range. A limit of detection of 0.09 mg l⁻¹ was obtained for cadmium determination; the R.S.D. for cadmium contents was in the 0.7–2.7% range. The determinations were performed after two different sample mineralization pre-treatments — dry ashing (in an electric furnace) and wet mineralization (in a microwave oven). Both methodologies provided comparable results for zinc and cadmium determination in shampoos. The proposed microwave assisted digestion procedures allow a precise and accurate determination of selenium, zinc and cadmium in commercial antidandruff shampoos, and the sample pre-treatment is less time-consuming than the classic methods.     

Exploiting clock transitions for the chemical design of resilient molecular spin qubits

Molecular spin qubits are chemical nanoobjects with promising applications that are so far hampered by the rapid loss of quantum information, a process known as decoherence. A strategy to improve this situation involves employing so-called Clock Transitions (CTs), which arise at anticrossings between spin energy levels. At CTs, the spin states are protected from magnetic noise and present an enhanced quantum coherence. Unfortunately, these optimal points are intrinsically hard to control since their transition energy cannot be tuned by an external magnetic field; moreover, their resilience towards geometric distortions has not yet been analyzed. Here we employ a python-based computational tool for the systematic theoretical analysis and chemical optimization of CTs. We compare three relevant case studies with increasingly complex ground states. First, we start with vanadium(iv)-based spin qubits, where the avoided crossings are controlled by hyperfine interaction and find that these S = 1/2 systems are very promising, in particular in the case of vanadyl complexes in an L-band pulsed EPR setup. Second, we proceed with a study of the effect of symmetry distortions in a holmium polyoxotungstate of formula [Ho(W₅O₁₈)₂]⁹⁻ where CTs had already been experimentally demonstrated. Here we determine the relative importance of the different structural distortions that causes the anticrossings. Third, we study the most complicated case, a polyoxopalladate cube [HoPd₁₂(AsPh)₈O₃₂]⁵⁻ which presents an unusually rich ground spin multiplet. This system allows us to find uniquely favorable CTs that could nevertheless be accessible with standard pulsed EPR equipment (X-band or Q-band) after a suitable chemical distortion to break the perfect cubic symmetry. Since anticrossings and CTs constitute a rich source of physical phenomena in very different kinds of quantum systems, the generalization of this study is expected to have impact not only in molecular spin science but also in other related fields such as molecular photophysics and photochemistry.

We employ a python computational tool to compare 3 relevant case studies with increasingly complex ground states: vanadyl complexes, Ho(iii) square antiprisms and Ho(iii) cubic structures.     

Chemistry of the phenoxathiins and isosterically related heterocycles. XXII. 6,7,9-trimethyl-4-azaphenoxathiin: First reported synthesis of an analog of the 4-azaphenoxathiin ring system

The reaction of 2-chloro-3-thiocyanatopyridine with a substituted spiroepoxycyclohexadienone, which served as a masked phenol with reversed polarity, led to the first reported synthesis of an analog of the 4-azaphenoxathiin ring system. Confirmation of the structure was obtained from the assignment of the ¹³C-nmr spectrum.     

Chemistry of the phenoxathiins and isosterically related heterocycles. XXIII . 1-azathianthrene: First reported synthesis of a monoazathianthrene and the investigation of the 13C-NMR spectrum using two-dimensional NMR techniques

The reaction of the dianion of 3-mercaptopyridin-2(1H)-thione with 2-chloronitrobenzene in N,N-dimethylformamide leads to the formation of 1-azathianthrene, the first reported mono-aza analog of the thianthrene ring system. A partial assignment of the ¹³C-nmr spectrum of the title compound is reported, the assignment based on chemical shift arguments, spin-lattice (T₁) relaxation times and ¹H-¹³C spin coupling constants. Amplitude modulated two-dimensional Fourier transform (AM2DFT) techniques were employed for the acquisition of the heteronuclear spin-coupling constants.     

Validated, non-destructive and environmentally friendly determination of cocaine in euro bank notes

A non-destructive, fast and environmentally friendly procedure has been developed for cocaine determination in euro bank notes. Cocaine was extracted with 15 ml methanol by vortex agitation during 5 min. The extract was evaporated and reconstituted in 0.5 ml methanol. GC-MS-MS analysis was performed using as precursor ion m/z 182.2, with an excitation energy voltage of 1.60 eV, being the product ions measured m/z 150.2 and 82.0. A limit of detection of 0.15 ng per note and a repeatability of 6%, established from the relative standard deviation, of a 1 ng ml(-1) level, were achieved. Recoveries of 101+/-2 and 98+/-3% were obtained for samples spiked with 100 and 10 microg respectively. Results show that all the euro bank notes measured (16 samples) were contaminated with cocaine in the range between 1.25 and 889 microg. Two different contamination levels, high level (150-889 microg) and low one (1.25-77 microg) were found and it could be related with the direct or indirect contact with the drug.     

Chemistry of the phenoxathiins and isosterically related heterocycles. XXXI. Synthesis of the 1,3-diazaphenoxathiin ring system and the relationship of the 13C-NMR chemical shift of the C-10a resonances to the molecular dihedral angle determined by X-Ray diffraction: A further investigation

Synthesis of the 1,3-diazaphenoxathiin ring system and the confirmation of its structure by ¹³C-nmr spectroscopy and X-ray crystallography are reported. Implications of the ¹³C-nmr chemical shift of the C-10a resonance and its relationship to the molecular dihedral angle are presented. The molecule crystallizes in the Pbca space group and was found to have a dihedral angle of 165.5(9)°, the structure refining to a final R-factor of T = 0.0427.