Strong ionic interactions in noncovalent complexes between poly(ethylene imine), a cationic electrolyte,and Cibacron Blue,a nucleotide mimic – implications for oligonucleotide vectors

Cationic polymers can bind DNA to form polyplexes, which are noncovalent complexes used for gene delivery into the targeted cells. For more insight on such biologically relevant systems, the noncovalent complexes between the cationic polymer poly(ethylene imine) (PEI) and the nucleotide mimicking dye Cibacron Blue F3G‐A (CB) were investigated using mass spectrometry methods. Two PEIs of low molecular weight were utilized (M_n ≈ 423 and 600 Da). The different types of CB anions produced by Na⁺/H⁺ exchanges on the three sulfonic acid groups of CB and their dehydrated counterparts were responsible for complex formation with PEI. The CB anions underwent noncovalent complex formation with protonated, but not with sodiated PEI. A higher proportion of cyclic oligomers were detected in PEI423 than PEI600, but both architectures formed association products with CB. Tandem mass spectrometry studies revealed a significantly stronger noncovalent interaction between PEI and dehydrated CB than between PEI and intact CB. Copyright © 2014 John Wiley & Sons, Ltd.     

Water‐Stable Zirconium‐Based Metal–Organic Framework Material with High‐Surface Area and Gas‐Storage Capacities

We designed, synthesized, and characterized a new Zr‐based metal–organic framework material, NU‐1100 , with a pore volume of 1.53 ccg^?1 and Brunauer–Emmett–Teller (BET) surface area of 4020 m²g^?1; to our knowledge, currently the highest published for Zr‐based MOFs. CH₄/CO₂/H₂ adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions. The total hydrogen adsorption at 65 bar and 77 K is 0.092 g g^?1, which corresponds to 43 g L^?1. The volumetric and gravimetric methane‐storage capacities at 65 bar and 298 K are approximately 180 v_STP/v and 0.27 g g^?1, respectively.     

Synthesis,identification and study of electrical conductivity of the doped poly aniline

Poly aniline and poly aniline doped with 2,5-dimethyl benzene sulfonic acid (PXSA), 4-hydroxy-m-benzene disulfonic acid (PDSA), 3-chloro-4-hydroxybenzene sulfonic acid (OCPSA) were prepared. The polymers are identified by FT-IR and UV–vis spectroscopy. The ionic conductivities of poly aniline and poly aniline doped with 2,5-dimethyl benzene sulfonic acid (PXSA), 4-hydroxy-m-benzene disulfonic acid (PDSA), 3-chloro-4-hydroxybenzene sulfonic acid (OCPSA) were studied as a function of weight of the dopant compounds. It is noted that an increase of the conductance of poly aniline by doping with OCPSA, and became equal to 0.001321 Ω^?1 for 1 g higher than the conductance for the poly aniline when it is doped with OCPSA.     

Organosilanols as catalysts in asymmetric aryl transfer reactions

[reaction: see text] Various ferrocene-based organosilanols have been synthesized in four steps starting from achiral ferrocene carboxylic acid. Applying these novel planar-chiral ferrocenes as catalysts in asymmetric phenyl transfer reactions to substituted benzaldehydes afforded products with high enantiomeric excesses. The best result (91% ee) was achieved in the addition to p-chlorobenzaldehyde with organosilanol 2b, which has a tert-butyl substituent on the oxazoline ring and an isopropyl group on the silanol fragment.     

A novel podophyllotoxin lignan from Justicia heterocarpa

Chromatographic separation of the extract of Justicia heterocarpa T. ANDERS. afforded, in addition to known fatty acids, terpenoids and steroids, a new podophyllotoxin lignan. Structures were elucidated by spectroscopic methods, and the structure of the new lignan was confirmed by single crystal X-ray diffraction studies, which have shown that there is a H-bonding stabilized dimer.     

Improvement of pour point and oxidative stability of synthetic ester basestocks for biolubricant applications

For environmental reasons, as well as the dwindling source of petroleum, a new class of environmentally acceptable and renewable biolubricants based on plant oils is available. Even though plant oils possess excellent lubricant-related properties, there are some concerns about using it as biolubricant base oil. In this study we present a series of structures derived from oleic acid to be used as synthetic biolubricant basestocks. Measuring of pour point (PP), flash point, viscosity index (VI), oxidation onset temperature (OT) and signal maximum temperature (SMT) was carried out for each compound. Furthermore, the friction and wear properties were measured using a high-frequency reciprocating rig (HFRR). The resulting product structures were confirmed by NMR and FTIR spectroscopic analysis. The results showed that ethylhexyl 9-(octanoyloxy)-10-(behenoxy)octadecanoate with behenyl mid-chain ester exhibited the most favorable low temperature performance (PP ?48 °C) and ethylhexyl 9-(octanoyloxy)-10-(octyloxy)octadecanoate octyl mid-chain ester exhibited higher oxidation stability (OT 142 °C) than the other synthetic ester oils. On the other hand, the highest ball wear scan diameter was obtained for ethylhexyl 9-(octanoyloxy)-10-(behenoxy)octadecanoate while the lowest value was obtained for 9-hydroxy-10-octyloxyoctadecanoic acid. Overall, it was concluded that these synthetic ester oils have potential in formulation of industrial fluids for different temperature applications.     

Mass attenuation coefficients for n-type InSe, InSe:Gd, InSe:Ho and InSe:Er single crystals

Measurements have been made to determine the mass attenuation coefficients of undoped n-type InSe, and Gd, Ho, Er doped n-InSe single crystals using a Si(Li) detector in the energy region 15.746–40.930 keV X-ray energies with energy dispersive X-ray fluorescence systems. InSe, InSe:Gd, InSe:Ho and InSe:Er single crystals were grown by using the stockbarger method. The measured values are graphically compared with the theoretical ones obtained using WinXcom.     

Characterization and estimation of refractive index profile of laser-written photopolymer optical waveguides

In this study, channel waveguides fabricated in photopolymer films by direct-writing using a low-power CW laser, are used as phase objects in a simple plane-wave diffraction setup, and the refractive index modulation profiles of the waveguides are characterized using the recorded diffraction patterns. Index profiles are modeled by piece-wisely combining two Gaussian functions representing the central and the tail regions. Measured diffraction patterns are matched with patterns generated using the model. This simple model makes it possible to design various channel waveguides embedded into polymer substrates. The proposed model is tested on three distinctive waveguide profiles written on the same Acrylamide/Polyvinyl Alcohol based photopolymer with different exposures.     

Electrochemical Detection of a Cancer Biomarker mir‐21 in Cell Lysates Using Graphene Modified Sensors

In the present study, the voltammetric and impidimetric detection of microRNA‐21, mir‐21 from cell lysates was investigated for the first time by using graphene modified disposable pencil graphite electrodes (GME). The surface characterization of GME was performed via electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). Upon passive adsorption of inosine substituted antimicroRNA‐21, antimir‐21 probe, InP, onto the surface of GME and then solid phase hybridization of InP with mir‐21, the target, the electrochemical detection was performed by using Differential Pulse Voltammetry (DPV) and EIS techniques. This developed biosensor, GME has presented a 2.77 times lower detection limit of 2.09 µg/mL (3.12 pmol) with respect to unmodified pencil graphite electrode (GE). Moreover it is capable of analyzing mir‐21 in the cell lysates of mir‐21 positive breast cancer cell line (MCF‐7) contrast to mir‐21 negative hepatoma cell line (HUH‐7). The proposed electrochemical yes‐no system does not require any purification and/or amplification step prior to fast detection of mir‐21 from real samples.     

A Heroin Epidemic Model: Very General Non Linear Incidence,Treat-Age,and Global Stability

The aim of this work is to establish the existence of multi-peak solutions for the following class of quasilinear problems

$$ - \mbox{div} \bigl(\epsilon^{2}\phi\bigl(\epsilon|\nabla u|\bigr)\nabla u \bigr) + V(x)\phi\bigl(\vert u\vert\bigr)u = f(u)\quad\mbox{in } \mathbb{R}^{N}, $$

where \(\epsilon\) is a positive parameter, \(N\geq2\), \(V\), \(f\) are continuous functions satisfying some technical conditions and \(\phi\) is a \(C^{1}\)-function.