Preparation and characterization of fluorine‐containing aromatic condensation polymers. VII. Aromatic polyacetals and copolyacetals from 2,2‐bis(4‐hydroxyphenyl)‐1,1,1,3,3,3‐hexafluoropropane and/or 2,2‐bis(4‐hydroxyphenyl)propane and 2‐(trifluoromethyl)benzal chloride

A series of fluorine‐containing aromatic homopolyacetals and copolyacetals with a wide range of unit ratios were synthesized by the solution polycondensation of 2,2‐bis(4‐hydroxyphenyl)‐1,1,1,3,3,3‐hexafluoropropane (bisphenol AF), 2,2‐bis(4‐hydroxyphenyl)propane (bisphenol A), or both with 2‐(trifluoromethyl)benzal chloride, and the effect of fluorine substitution on the properties of these polymers is discussed in relation to the fluorine contents. High molecular weight polyacetals with reduced viscosities of 0.43–0.97 dL/g were obtained in high yields with potassium hydroxide as a base, 18‐crown 6‐ether as a catalyst, and N‐methyl‐2‐pyrrolidinone as a medium at 100 °C for 3 h. Regardless of the fluorine contents, these polymers all were highly soluble in various solvents, including benzene, chloroform, ethyl acetate, and tetrahydrofuran, and afforded colorless, transparent, and tough films by solution casting. The temperatures of 5% weight loss and 10% weight loss under nitrogen both increased significantly and monotonously with increasing fluorine content, whereas the glass‐transition temperatures were scarcely affected by fluorine substitution. The dielectric constant at 1 MHz of the bisphenol AF‐based homopolyacetal was 2.43, which was remarkably lower than the value of the bisphenol A‐based homopolyacetal, 2.68. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1873–1879, 2000     

Luminol Chemiluminescence with Heteropoly Acids and its Application to the Determination of Arsenate,Germanate, Phosphate and Silicate by Ion Chromatography

A flow-injection chemiluminescence (CL) method has been proposed for sensitive determination of arsenate, germanate, phosphate and silicate, after separation by ion chromatography (IC). The post-column detection system involved formation of heteropoly acid in a H₂SO₄ medium before the CL reaction with luminol in an NaOH medium. For separation, heteropoly acid formation and the CL detection reaction, pH requirements were not compatible. When present as a heteropoly acid complex with molybdenum(VI), ger- manium(IV) and silicon(IV) caused CL emission from oxidation of luminol, and such a CL oxidation of luminol was observed analogously for arsenic(V) and phosphorus(V) but with the addition of metavanadate ion to the acid solution of molybdate. Good sensitivity for the three analytes arsenic(V), ger- manium(IV) and phosphorus(V) could be given by a single set of reagent conditions, chosen carefully. Another set was suitable for determining phosphorus(V) and silicon(IV). The minimum detectable concentrations of arsenic(V), germanium(IV), phosphorus(V) and silicon(IV) were 10, 50, 1 and 10 μg l⁻¹, respectively. Linear calibrations for arsenic(V), germanium(IV), phosphorus(V) and silicon(IV) were established over the respective concentration ranges of 10–1000, 50–25000, 1–1000 and 50–1 μg l⁻¹. The proposed IC–CL method was successfully applied to analyses of a seaweed reference material, rice wine and water samples.     

Reexamination of 2-Naphthol Adsolubilization on Alumina with Sodium Dodecyl Sulfate Adsorption

Adsolubilization behavior of 2-naphthol on alumina with adsorption of sodium dodecyl sulfate (SDS) at pH 3.5 in the presence of 10 mmol dm(-3) NaCl was reexamined. The adsolubilized amount of 2-naphthol increased sharply and reached a maximum, then decreased with SDS concentration. The decrement of the adsolubilized amount began below the critical micelle concentration of SDS. From the dispersion state of the alumina suspension and the SDS adsorption isotherm, it is demonstrated that the decrement of adsolubilization of 2-naphthol is not due to the partition of 2-naphthol between the SDS adsorbed layer and SDS micelles, but is due to the difference of SDS adsorption states such as monolayers and admicelles. Copyright 2000 Academic Press.     

Membrane properties of binary and ternary systems of ganglioside GM1/dipalmitoylphosphatidylcholine/dioleoylphosphatidylcholine

The membrane properties of the ganglioside GM1 (GM1)/dioleoylphosphatidylcholine (DOPC) binary system and GM1/dipalmitoylphosphatidylcholine (DPPC)/DOPC ternary system were investigated using surface pressure measurements and atomic force microscopy (AFM), and the effect of surface pressure on the properties of the membranes was examined. Mixed GM1/DPPC/DOPC monolayers were deposited on mica using the Langmuir-Blodgett technique for AFM. GM1 and DOPC were immiscible and phase-separated. The AFM image of the GM1/DOPC (1:1) monolayer showed island-like GM1 domains embedded in the DOPC matrix. There was no morphological change on varying surface pressure. The surface pressure-area isotherm of the GM1/DPPC/DOPC (2:9:9) monolayer showed a two-step collapse as in the DPPC/DOPC (1:1) monolayer. The AFM image for the GM1/DPPC/DOPC monolayer showed DPPC and GM1 domains in the DOPC matrix, and the DPPC-rich phase containing GM1 showed a percolation pattern the same as the GM1/DPPC (1:9) monolayer. The percolation pattern in the GM1/DPPC/DOPC monolayer changed as the surface pressure was varied. The surface pressure-responsive change in morphology of GM1 was affected by the surrounding environment, suggesting that the GM1 localized in each organ has a specific role.     

Effect of membrane composition on surface states of ganglioside GM1/dipalmitoylphosphatidylcholine/dioleoylphosphatidylcholine monolayers

The surface states of ganglioside GM1 (GM1)/dipalmitoylphosphatidylcholine (DPPC)/dioleoylphosphatidylcholine (DOPC) monolayers having various compositions were investigated using atomic force microscopy (AFM), and the effect of the composition on the surface states of the membrane was examined. The AFM images for the ternary system showed a DPPC-rich phase containing GM1 in the DOPC matrix, which indicated that the morphology varied as the composition of the monolayers changed. The AFM images for the GM1/DPPC/DOPC monolayers having (2:9:9) and (4:18:9) molar ratios showed a percolation pattern similar to that observed for the GM1/DPPC (1:9) monolayer. The AFM image for the GM1/DPPC/DOPC (2:18:9) monolayer showed a dotted pattern with a high topography. Monolayers having a higher content of DOPC than DPPC and/or having a higher content of GM1 showed dot-like domains in the DPPC-rich phase containing GM1. In conclusion, the surface states of GM1/DPPC/DOPC monolayers changed depending on the composition. These results may be related to a diversity of GM1 in various organs.     

Thermodynamic and kinetic stability of synthetic multifunctional rigid-rod beta-barrel pores: evidence for supramolecular catalysis

The lessons learned from p-octiphenyl beta-barrel pores are applied to the rational design of synthetic multifunctional pore 1 that is unstable but inert, two characteristics proposed to be ideal for practical applications. Nonlinear dependence on monomer concentration provided direct evidence that pore 1 is tetrameric (n = 4.0), unstable, and "invisible," i.e., incompatible with structural studies by conventional methods. The long lifetime of high-conductance single pores in planar bilayers demonstrated that rigid-rod beta-barrel 1 is inert and large (d approximately 12 A). Multifunctionality of rigid-rod beta-barrel 1 was confirmed by adaptable blockage of pore host 1 with representative guests in planar (8-hydroxy-1,3,6-pyrenetrisulfonate, KD = 190 microM, n = 4.9) and spherical bilayers (poly-L-glutamate, KD < or = 105 nM, n = 1.0; adenosine triphosphate, KD = 240 microM, n = 2.0) and saturation kinetics for the esterolysis of a representative substrate (8-acetoxy-1,3,6-pyrenetrisulfonate, KM = 0.6 microM). The thermodynamic instability of rigid-rod beta-barrel 1 provided unprecedented access to experimental evidence for supramolecular catalysis (n = 3.7). Comparison of the obtained kcat = 0.03 min(-1) with the kcat approximately 0.18 min(-1) for stable analogues gave a global KD approximately 39 microM3 for supramolecular catalyst 1 with a monomer/barrel ratio approximately 20 under experimental conditions. The demonstrated "invisibility" of supramolecular multifunctionality identified molecular modeling as an attractive method to secure otherwise elusive insights into structure. The first molecular mechanics modeling (MacroModel, MMFF94) of multifunctional rigid-rod beta-barrel pore hosts 1 with internal 1,3,6-pyrenetrisulfonate guests is reported.     

High-speed DNA sequencing by tube-based capillary electrophoresis

We assessed the feasibility of high-speed DNA sequencing by tube-based capillary electrophoresis (TCE) with electrokinetic sample injections. We developed a water-circulated TCE system to control the capillary temperature precisely. Using this system and a ready-made sieving matrix at 50 degrees C, single-stranded DNA size marker fragments were separated at various pairs of the electric field strength, E, of 128-480 V/cm and the capillary effective length, L, of 100-360 mm. Assuming the read length (RL) is the fragment size at which the peak width equals the peak interval per base in obtained electropherograms, we estimated the values of RL (E, L), the RL at the pair (E, L). The points in ELz-space, (E, L, RL(E, L)), form a curved surface expressed by z = RL(E, L). Analyzing the contour lines of this curved surface, we determined the pairs of E and L providing target RLs of 300-500 bases within a minimum time. At a pair optimized for a 500-base RL (330 V/cm, 200 mm), one-color sequencing fragments were successfully separated up to 529 bases within 9.6 min. These results demonstrate that high-speed DNA sequencing comparable with that obtained by microfabricated chip-based capillary electrophoresis (MCE) can be achieved with TCE, which is more suitable in automation than MCE.     

Membrane properties of mixed ganglioside GM1/phosphatidylcholine monolayers

The interaction between ganglioside G_M1 (GM1) and --dipalmitoylphosphatidylcholine (DPPC) in mixed monolayers was investigated using surface pressure measurements and atomic force microscopy (AFM), and the effects of GM1, surface pressure and temperature on the properties of the membranes were examined. Mixed GM1/DPPC monolayers were deposited on mica using the Langmuir–Blodgett (LB) technique for AFM. GM1 and DPPC were miscible below the 0.2 mole fraction of GM1 and there was attractive interaction between GM1 and DPPC. The AFM images for the GM1/DPPC monolayers (X_GM1 < 0.2) at 30 mN m⁻¹ and 25 °C indicated a percolation pattern which means a micro phase separation: namely, the mixed film composed of GM1 and DPPC phase-separated from the DPPC liquid-condensed film. The AFM images for the mixed monolayers at 33 mN m⁻¹ indicated a specific morphology when the surface pressure was varied from 30 to 40 mN m⁻¹. The percolation pattern in the AFM image at 25 °C came to be destroyed with increasing temperature and completely disappeared at 45 °C. The change in the morphology of mixed GM1/DPPC monolayers on varying the surface pressure and temperature is thought to be related to signal transduction and a preventive mechanism against viral infections in the human body.     

Temperature‐sensitive poly(N‐isopropylacrylamide)‐grafted surfaces modulate blood platelet interactions

Interactions between a temperature‐responsive poly(N‐isopropylacrylamide)‐grafted surface and blood platelets have been analyzed with computerized image analysis. Platelet behavior on this surface is dramatically dependent upon temperature in contrast to that on poly(ethylene glycol) (PEG)‐grafted surfaces or polystyrene. The poly(N‐isopropylacrylamide)‐grafted surface interacts with platelets similarly as the poly(ethylene glycol)‐rafted surface at 18°C. At 37°C, platelets readily adhere onto the poly(N‐isopropylacrylamide)‐grafted surface similarly as to that of polystyrene.