Dielectric Properties of Colossal-Dielectric-Constant Na1/2La1/2Cu3Ti4O12 Ceramics Prepared by Spark Plasma Sintering

In the current study, we report on the dielectric behavior of colossal-dielectric-constant Na_1/2La_1/2Cu₃Ti₄O₁₂ (NLCTO) ceramics prepared by mechanochemical synthesis and spark plasma sintering (SPS) at 850 °C, 900 °C, and 925 °C for 10 min. X-ray powder diffraction analysis showed that all the ceramics have a cubic phase. Scanning electron microscope observations revealed an increase in the average grain size from 175 to 300 nm with an increase in the sintering temperature. SPS NLCTO ceramics showed a room-temperature colossal dielectric constant (>10³) and a comparatively high dielectric loss (>0.1) over most of the studied frequency range (1 Hz–40 MHz). Two relaxation peaks were observed in the spectra of the electrical modulus and attributed to the response of grain and grain boundary. According to the Nyquist plots of complex impedance, the SPS NLCTO ceramics have semiconductor grains surrounded by electrically resistive grain boundaries. The colossal dielectric constant of SPS NLCTO ceramics was attributed to the internal barrier layer capacitance (IBLC) effect. The high dielectric loss is thought to be due to the low resistivity of the grain boundary of SPS NLCTO.     

Application of parameter differentiation for flow of a third grade fluid past an infinite porous plate

This article investigates the analytic solution for the flow of a third grade fluid past an infinite porous plate. The method of parameter differentiation is used to linearized the governing flow equation. The solution of the obtained linear equation is developed by differential transform method in combination with the method of superposition. The obtained results are compared with existing results in the literature and an excellent agreement is found. This shows that the parameter differentiation is a powerful technique for solving nonlinear problems. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2010     

Comparative study of spectroscopic techniques for the estimation of iron in apple and vegetables

Iron has been determined in apple and vegetables spectrophotometrically, by complexing it with xylenol orange. 1:1 complex formed in a highly acidic medium is measured for its absorbance at its λ_max of 585 nm. The results have been compared by employing atomic absorption technique. Apples and vegetable samples were collected from local markets of Pakistan. Statistical manipulations, t-test and F-test, were performed and it was found that the results from the two techniques have an excellent agreement.     

硫酸溶液中胶束催化Ce(IV)氧化D-甘露糖

Kinetics of D-mannose oxidation by cerium (IV) was studied in a sulfuric acid medium at 40℃ both in absence and presence of ionic micelles. In both cases, the rate of the reaction was first-order in D-mannose and in cerium(Ⅳ), which decreased with increasing [H2SO4]. This suggested that the redox reaction followed the same mechanism. The reaction proceeded through formation of an intermediate complex, which was proved by kinetic method. The complex underwent slow unimolecular decomposition to a free radical that reacted with cerium (Ⅳ) to afford the product. The catalytic role of cationic cetyltrimethylammonium bromide (CTAB) micelles was best explained by the Menger-Portnoy model. The study of the effect of CTAB also indicated that a negatively charged species was reactive form of cerium (Ⅳ). From the kinetic data, micelle-cerium (Ⅳ) binding and rate constants in micellar medium were evaluated.The anionic micelle of sodium dodecyl sulfate plays no catalytic role. The oxidation has the rate expression: --d[Ce(Ⅳ)]= k1Kcl[D-mannose] [Ce(Ⅳ)]dt Different activation parameters for micelle catalyzed and uncatalyzed paths were also calculated and discussed.     

Three-dimensional flow over a stretching surface in a viscoelastic fluid

This article looks at the hydrodynamic elastico-viscous fluid over a stretching surface. The equations governing the flow are reduced to ordinary differential equations, which are analytically solved by applying an efficient technique namely the homotopy analysis method (HAM). The solutions for the velocity components are computed. The numerical values of wall skin friction coefficients are also tabulated. The present HAM solution is compared with the known exact solution for the two-dimensional flow and an excellent agreement is found.     

Analytic solution for MHD rotating flow of a second grade fluid over a shrinking surface

This Letter looks at the rotating flow of a second grade fluid past a porous shrinking surface. The fluid is electrically conducting in the presence of a constant applied magnetic field. The governing partial differential equations are first reduced into ordinary differential equations and then solved by homotopy analysis method (HAM). Convergence of the series solution is shown explicitly. In addition, the obtained results are illustrated graphically to indicate the effects of the pertinent physical parameters.     

Efficient two-dimensional atom localization in a five-level conductive chiral atomic medium via birefringence beam absorption spectrum

We have theoretically investigated two-dimensional atom localization using the absorption spectra of birefringence beams of light in a single wavelength domain.The atom localization is controlled and modified through tunneling effect in a conductive chiral atomic medium with absorption spectra of birefringent beams.The significant localization peaks are investigated in the left and right circularly polarized beam.Single and double localized peaks are observed in different quadrants with minimum uncertainty and significant probability.The localized probability is modified by controlling birefringence and tunneling conditions.These results may be useful for the capability of optical microscopy and atom imaging.     

Self-collimation in photonic crystals with anisotropic constituents

In a photonic crystal composed of anisotropic constituents we quantify the range of input angles and the degree of collimation of the beam inside the crystal. The optical properties of a photobleached 4-dimethylamino-N-methyl-4-stilbazolium-tosylate (DAST) crystal are used in our model to demonstrate the efficacy of the self-collimation features.     

Bacilli as Biological Nano-factories Intended for Synthesis of Silver Nanoparticles and Its Application in Human Welfare

The search of eco-friendly technologies for nano-synthesis is significant to expand their applications in human welfare. Nowadays, various inorganic nanoparticles with beneficial features have been synthesized via physical, chemical, and biological means. Significant biological applications of silver nanoparticles include on-infectious microbes, target drug delivery, cancer and vector-borne disease control. Their syntheses have been tested from plant fungi, bacteria, and viruses. The bacterial mediated synthesis of silver, gold, zinc and other metal leads to a milestone in nano-medicines. Thus, in this review, we focus on the contribution of Bacilli in the synthesis of silver nanoparticles, the mechanism of action and their potential application in the welfare of human beings.     

Rotating flow of a third grade fluid in a porous space with Hall current

This study investigates the rotating magnetohydrodynamic (MHD) flow of a third-grade fluid in a porous space. Modified Darcy's law has been utilized for the flow modeling. The Hall effects are taken into consideration. The basic equations governing the flow are reduced to a highly nonlinear ordinary differential equation. This equation has been solved analytically by employing the homotopy analysis method (HAM). The effects of the various interesting parameters on the velocity distribution have been discussed.