Electrically conducting film of silver sub-micron particles as mechanical and electrical interfaces for transfer printed micro- and nano-pillar devices

In this paper we report a novel application of electrically conductive film (ECF) of Ag sub-micron particles that includes both isotropic and anisotropic film technologies in providing simultaneous electrical contact and mechanical anchor between fracture transfer-printed (1-D) single crystal semiconductor micro- and nano-pillars and a carrier substrate. We assembled silver sub-micron particles (AgSP) monolayers with varying particle diameters and investigated their optical and electrical characteristics prior to their incorporation into thermoplastic polymers. It was found that transfer-printing of the Si micropillar arrays, into electrically conductive thermoplastic receiver substrates, made of films of AgSP/PMMA blends atop metallic substrates could be effectively achieved to yield electrically interfaced 1-D Si micropillar arrays with retention of their orientation and integrity according to the SEM images. The carrier substrate can potentially be reused to generate additional Si micropillar arrays that can be similarly harvested.     

Issues on nanoimprint lithography with a single-layer resist structure

We summarize our key developments in nanoimprint lithography (NIL) that employs a single layer resist lift-off process: lowering of the imprint temperature (for thermal imprint) and pressure, achieving uniform resist thickness and low residual resist layer thickness in the trenches, and eliminating metal ‘rabbit ears’ for the single-layer lift-off. In thermal NIL, our requirements for lower operating temperature and pressure motivated us to develop an alternative resist that is a viscous fluid at room temperature and cures at a lower temperature of 70 °C than the operating temperature of the conventional thermal NIL (≈200 °C). For UV NIL, we devised a method to dispense the resist onto a hydrophobic mold and use the hydrophilic substrate surface to spread the resist via surface wetting to engineer a continuous and uniform film. We also explored the use of Si(110) substrates as molds to produce features with perfectly vertical side walls, and the use of aqua regia to directly etch away rabbit ears. PACS 86.65.+h; 81.16.Nd; 81.16.Rf     

Emergence of power-law in a market with mixed models

We investigate the problem of wealth distribution from the viewpoint of asset exchange. Robust nature of Pareto's law across economies, ideologies and nations suggests that this could be an outcome of trading strategies. However, the simple asset exchange models fail to reproduce this feature. A Yardsale (YS) model in which amount put on the bet is a fraction of minimum of the two players leads to condensation of wealth in hands of some agent while theft and fraud (TF) model in which the amount to be exchanged is a fraction of loser's wealth leads to an exponential distribution of wealth. We show that if we allow few agents to follow a different model than others, i.e., there are some agents following TF model while rest follow YS model, it leads to distribution with power-law tails. Similar effect is observed when one carries out transactions for a fraction of one's wealth using TF model and for the rest YS model is used. We also observe a power-law tail in wealth distribution if we allow the agents to follow either of the models with some probability.     

Ultra-smooth platinum surfaces for nanoscale devices fabricated using chemical mechanical polishing

A technique involving two steps of chemical mechanical polishing (CMP) has been developed to produce ultra-smooth metal surfaces with an RMS roughness better than 0.1 nm. A figure of merit termed degree of smoothness (DOS) is proposed for the purpose of quantifying the extent of smoothness of a polished metal surface. A post CMP metal slurry cleaning solution was used for cleaning Pt slurry for the first time and by applying special techniques, a very high quality clean surface was attained. Applications of the polished Pt electrodes in interfacing molecular switching devices with self-assembled monolayers of molecules have been found to dramatically improve the packing and orientation of the molecular monolayer with a huge improvement in the molecular electronics device yields. These smooth metal surfaces may open doors for new opportunities in future nanoscale devices. PACS 81.05.Bx; 81.16.Rf; 81.65.Ps     

An observer for a class of disturbance driven nonlinear systems

An observer design for a class of nonlinear systems driven by disturbances or uncertainties is presented. The design is based on a high gain strategy, and the gain of the proposed observer is explicitly given.     

Interface engineering for solid-state dye-sensitised nanocrystalline solar cells: the use of an organic redox cascade

We demonstrate the formation of a charge transfer cascade at a nanostructured TiO2/dye/polymer/molecular hole transport multilayer interface. Charge recombination dynamics at this interface are shown to be retarded when the ionisation potential of the polymer layer exceeds that of the molecular hole transport layer.     

Photochemical energy conversion: from molecular dyads to solar cells

Photochemical approaches to solar energy conversion are currently making rapid progress, increasing not only academic but also commercial interest in molecular-based photovoltaic solar cells. This progress has been achieved not only by increased understanding of the physics and physical chemistry of device function but also through advances in chemical and materials synthesis and processing, which now allows the design and fabrication of increasingly sophisticated device structures organised on the nanometer length scale. In this feature article, we review some progress in this field, focusing in particular upon the electron-transfer dynamics which underlie the function of dye-sensitised, nanocrystalline solar cells. The article starts by building upon the parallels between the function of such devices and the function of simple donor/acceptor molecular systems in solution. We then go on to discuss the optimisation of device function, and in particular the use of self-assembly-based strategies to control interfacial electron-transfer kinetics.     

Creeping flow analysis of slightly non-Newtonian fluid in a uniformly porous slit

This paper provides the analysis of the steady, creeping flow of a special class of slightly viscoelastic, incompressible fluid through a slit having porous walls with uniform porosity. The governing two dimensional flow equations along with non-homogeneous boundary conditions are non-dimensionalized. Recursive approach is used to solve the resulting equations. Expressions for stream function, velocity components, volumetric flow rate, pressure distribution, shear and normal stresses in general and on the walls of the slit, fractional absorption and leakage flux are derived. Points of maximum velocity components are also identified. A graphical study is carried out to show the effect of porosity and non-Newtonian parameter on above mentioned resulting expressions. It is observed that axial velocity of the fluid decreases with the increase in porosity and non-Newtonian parameter. The outcome of this theoretical study has significant importance both in industry and biosciences.     

Optimal control of a production-inventory system with customer impatience

We consider the control of a production-inventory system with impatient customers. We show that the optimal policy can be described using two thresholds: a production base-stock level that determines when production takes place and an admission threshold that determines when orders should be accepted. We describe an algorithm for computing the performance of the system for any choice of base-stock level and admission threshold. In a numerical study, we compare the performance of the optimal policy against several other policies.