CH_4 reforming with CO_2 for syngas production over La_2O_3 promoted Ni catalysts supported on mesoporous nanostructured γ-Al_2O_3

Nanostructured γ-Al2O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2adsorption-desorption,TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2 g-1and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and O2 to dry reforming feed increased the methane conversion and led to carbon free operation in combined processes.     

溶胶-凝胶新方法合成介孔铁酸铜纳米粉体催化剂上CO低温氧化(英文)

Mesoporous CuFe2O4 solid solution nanopowders with high specific surface areas were synthesized by a novel, very simple and inexpensive sol-gel route using propylene oxide as gelation agent, and used as the catalyst in low temperature CO oxidation. The samples were characterized by X-ray diffraction, N2 adsorption-desorption, thermogravimetric/differential thermal analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and temperature-programmed reduction. The results revealed that the samples have a nanocrystalline structure with crystals in the range of 10 to 25 nm, and that all the catalysts have mesoporous pores. The addition of Cu into iron oxide affected its structural and catalytic properties. The sample containing 15 mol% Cu showed the highest specific surface area and catalytic activity, and showed high catalytic stability in low temperature CO oxidation.     

Homogeneous Liquid–Liquid Microextraction Via Flotation Assistance (HLLME-FA) Method for the Pretreatment of Organochlorine Pesticides in Aqueous Samples and Determination by GC–MS

This work proposes a new, rapid and simple homogeneous liquid–liquid microextraction via flotation assistance technique for the analysis of six organochlorine pesticides in water samples. A special extraction cell was used to facilitate collection of the low-density solvent extract. No centrifugation was required in this procedure. Determination was carried using gas chromatography–mass spectrometry. The water sample solution was then added into the extraction cell containing appropriate mixture of extract and homogeneous solvents. In the first step, a homogeneous solution and then with the continuation of water sample injection, a cloudy solution was formed. Using air flotation, the organic solution was collected at the conical part of the designed cell. The optimized levels of effective parameters were found based on response surface methodology approach. Applying the optimized conditions to the system understudy, the limits of detection of all target analytes were obtained in the range of 1.4–7 ng mL^?1, while the precisions were found to be in the range of 11.08–14.87 (RSD, n = 3). The linearity of the method lay in the range of 10–150 ng mL^?1 with the coefficients of correlation (r ² ) ranging from 0.998 to 0.999.     

Silica Sulfuric Acid: A Versatile and Reusable Catalyst for Synthesis of Coumarin-3-carboxylic Acids in a Solventless System

Synthesis of substituted coumarin-3-carboxylic acid via Knoevenagel condensation of meldrum's acid with ortho-hydroxyaryl aldehydes in solventless system is described.     

Second-order calibration of excitation-emission matrix fluorescence spectra for determination of glutathione in human plasma

A rapid non-separative spectroflourimetric method based on the second-order calibration of the excitation-emission data matrix was proposed for the determination of glutathione (GSH) in human plasma. In the phosphate buffer solution of pH 8.0 GSH reacts with ortho-phthaldehyde (OPA) to yield a fluorescent adduct with maximum fluorescence intensity at about 420 nm. To handle the interfering effects of the OPA adducts with aminothiols other than GSH in plasma as well as intrinsic fluorescence of human plasma, parallel factor (PARAFAC) analysis as an efficient three-way calibration method was employed. In addition, to model the indirect interfering effect of the plasma matrix, PARAFAC was coupled with standard addition method. The two-component PARAFAC modeling of the excitation-emission matrix fluorescence spectra accurately resolved the excitation and emission spectra of GSH, plasma (or plasma constituents). The concentration-related PARAFAC score of GSH represented a linear correlation with the concentration of added GSH, similar to that is obtained in simple standard addition method. Using this standard addition curve, the GSH level in plasma was found to be 6.10 ± 1.37 μmol L⁻¹. The accuracy of the method was investigated by analysis of the plasma samples spiked with 1.0 μmol L⁻¹ of GSH and a recovery of 97.5% was obtained.     

Fabrication of Electrochemical Sensor Based on CeO2−SnO2 Nanocomposite Loaded on Pd Support for Determination of Nitrite at Trace Levels

Here, an electrochemical sensor based on CeO₂‐SnO₂/Pd was prepared and used for highly selective and sensitive determination of nitrite in some real samples. This nanocomposite was characterized by various methods like X‐ray photoelectron spectroscopy, X‐ray diffraction, energy dispersive spectroscopy, Fourier‐transform infrared spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry. The results showed excellent catalytic property of the nanocomposite as a an electrocatalyst for nitrite oxidation. In the following, the experimental parameters affecting the analytical signal for nitrite were optimized. Under the optimal conditions, the limit of detection and sensitivity of the sensor were calculated as 0.10 μM and 652.95 μA.mM^?1.cm^?2, respectively. Also, the response of the sensor was linear in the range of 0.36 to 2200 μM of nitrite. Finally, some of the inherent features of the sensor such as repeatability, reproducibility and stability were examined after evaluation of the sensor selectivity in the presence of several interfering species.     

N-isocyaniminotriphenylphosphorane (Ph3PNNC) as an efficient reagent for the synthesis of ferrocene-containing 1,3,4-oxadiazole derivatives

Reaction of N-isocyaniminotriphenylphosphorane (Ph₃PNNC) with an aromatic aldehyde in the presence of ferrocene carboxylic acid and a secondary amine proceeds smoothly at room temperature under neutral conditions to afford sterically congested ferrocene-containing 1,3,4-oxadiazole derivatives in high yields. The reaction progresses smoothly and clearly under mild conditions and no side reactions were observed.     

A deterministic,multi-item inventory model with supplier selection and imperfect quality

This paper considers the scenario of supply chain with multiple products and multiple suppliers, all of which have limited capacity. We assume that received items from suppliers are not of perfect quality. Items of imperfect quality, not necessarily defective, could be used in another inventory situation. Imperfect items are sold as a single batch, prior to receiving the next shipment, at a discounted price. The demand over a finite planning horizon is known, and an optimal procurement strategy for this multi-period horizon is to be determined. Each of products can be sourced from a set of approved suppliers, a supplier-dependent transaction cost applies for each period in which an order is placed on a supplier. A product-dependent holding cost per period applies for each product in the inventory that is carried across a period in the planning horizon. Also a maximum storage space for the buyer in each period is considered. The decision maker, the buyer, needs to decide what products to order, in what quantities, with which suppliers, and in which periods. Finally, a genetic algorithm (GA) is used to solve the model.     

A predictive, simple and rapid method for thermodynamic study on the binding of copper ion with Alzheimer''s amyloid β peptide

The interaction of CuC12 to the first 16 residues of the Alzbeimer's amyliod β peptide, Aβ(1-16) was studied by isothermal titration calorimetry at pH 7.2 and 37 ℃ in aqueous solution.