Spectrophotometric determination of the formation constants of some transition metal cations with a new synthetic Schiff base in dichloromethane and chloroform using rank annihilation factor analysis

The complex formation between a new synthesized Schiff base and the cations Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺ in dichloromethane (DCM) and chloroform solutions was investigated spectrophotometrically using rank annihilation factor analysis (RAFA). The results of mole ratio plots and continuous variation data show the stoichiometry of complexation were found to be 1:1, and 2:1 metal ion to ligand. The stoichiometry was obtained as 1:1 metal ion to ligand ratio for Co²⁺, Ni²⁺ and Zn²⁺ in chloroform and 2:1 for Cu²⁺. In DCM the stoichiometry was obtained as 1:1 for Co²⁺ and 2:1 for Ni²⁺ and Zn²⁺ and a consecutive 2:1 metal ion to ligand ratio was obtained for Cu²⁺. Formation constants of these complexes were estimated by application of RAFA on spectrophotometric data. In this process the contribution of ligand was removed from the absorbance data matrix when the complex stability constant acts as an optimizing object and simply combined with the pure spectrum of the ligand, the rank of the original data matrix can be reduced by one by annihilating the information of the ligand from the original data matrix.     

Investigation on the dynamics of electron transport and recombination in TiO2 nanotube/nanoparticle composite electrodes for dye-sensitized solar cells

In this work, we report on fabrication and characterization of dye-sensitized solar cells based on TiO(2) nanotube/nanoparticle (NT/NP) composite electrodes. TiO(2) nanotubes were prepared by anodization of Ti foil in an organic electrolyte. The nanotubes were chemically separated from the foil, ground and added to a TiO(2) nanoparticle paste, from which composite NT/NP electrodes were fabricated. In the composite TiO(2) films the nanotubes existed in bundles with a length of a few micrometres. By optimizing the amount of NT in the paste, dye-sensitized solar cells with an efficiency of 5.6% were obtained, a 10% improvement in comparison to solar cells with pure NP electrodes. By increasing the fraction of NT in the electrode the current density increased by 20% (from 11.1 to 13.3 mA cm(-2)), but the open circuit voltage decreased from 0.78 to 0.73 V. Electron transport, lifetime and extraction studies were performed to investigate this behavior. A higher fraction of NT in the paste led to more and deeper traps in the resulting composite electrodes. Nevertheless, faster electron transport under short-circuit conditions was found with increased NT content, but the electron lifetime was not improved. The electron diffusion length calculated for short-circuit conditions was increased 3-fold in composite electrodes with an optimized NT fraction. The charge collection efficiency was more than 90% over a wide range of light intensities, leading to improved solar cell performance.     

Catalytic study of the copper-based magnetic nanocatalyst on the aerobic oxidation of alcohols in water

A copper-based magnetic nanocatalyst has been prepared by co-precipitation method and characterized by FESEM, EDS, TEM, XRD, XRF, ICP–OES, FTIR, and BET analysis. This new nanocatalyst displays a good activity toward the aerobic oxidation of a wide range of alcohols in water. Moreover, it is recyclable up to five following runs by simple filtration without any significant loss of its catalytic activity.

     

Synthesis and characterization of two new fluorescent macrocycles: A novel fluorescent chemosensor for zinc ion

Two new macrocyclic systems (L¹, L²) containing two emissive naphthalene were synthesized and characterized. The macrocycles were studied by ¹H NMR, ¹³C NMR, COSY, HMQC, DEPT, microanalysis and mass spectroscopy. The influence of metal cations Na⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺ on the spectroscopic properties of the macrocyclic systems in acetonitrile/DMF 9:1 (v/v) mixtures were investigated by means of absorption and emission spectrophotometry. The macrocycle L¹ was found to be as an effective fluorescence sensor for Zn²⁺ ions. Zn²⁺ and Cd²⁺ ions show the most effects on the fluorescence intensity of L².     

Modified alpha-beta chimeric oligoDNA bearing a multi-conjugate of 2,2-bis(hydroxymethyl)propionic acid-anthraquinone-polyamine exhibited improved and stereo-nonspecific triplex-forming ability

Novel alpha-beta chimeric oligonucleotides bearing a propionic acid derivative of an anthraquinone-polyamine conjugate in the "linker" region sequence-specifically formed a substantially stable alternate-stranded triplex with dsDNA almost regardless of the stereochemistry of the derivative.     

Remote photoacoustic imaging on solid material using a two-wave mixing interferometer

We report on remote and contactless photoacoustic imaging (PAI) for the inspection of solid materials using a two-wave mixing interferometer. In this Letter, a semitransparent sample was excited with picosecond laser pulses. The local absorption of the electromagnetic radiation led to generation of broadband ultrasonic waves inside the sample. Ultrasonic waves arriving at the sample surface were detected utilizing a two-wave mixing interferometer. After data acquisition, the initial pressure distribution was reconstructed using a Fourier space synthetic aperture technique algorithm. We show the potential of PAI for the inspection of semitransparent solid materials.     

Clustering Categorical Data via Ensembling Dissimilarity Matrices

We present a technique for clustering categorical data by generating many dissimilarity matrices and combining them. We begin by demonstrating our technique on low-dimensional categorical data and comparing it to several other techniques that have been proposed. We show through simulations and examples that our method is both more accurate and more stable. Then we give conditions under which our method should yield good results in general. Our method extends to high-dimensional categorical data of equal lengths by ensembling over many choices of explanatory variables. In this context, we compare our method with two other methods. Finally, we extend our method to high-dimensional categorical data vectors of unequal length by using alignment techniques to equalize the lengths. We give an example to show that our method continues to provide useful results, in particular, providing a comparison with phylogenetic trees. Supplementary material for this article is available online.     

Modeling elongational viscosity of blends of linear and long-chain branched polypropylenes

To enhance the melt strength of a conventional linear polypropylene (L-PP), blends with a long-chain branched polypropylene (LCB-PP) were produced by adding 2, 5, 10, 25, 50, and 75 wt% of LCB-PP to L-PP and mixing in a twin screw extruder. It was found that, already, an addition of 10% or less of LCB-PP to L-PP leads to significant strain hardening. Elongational viscosity data of L-PP and LCB-PP and those of their blends were analyzed by the use of the molecular stress function (MSF) theory. While L-PP is characterized by the MSF parameter, β=1 (typical for linear melts), and shows very little chain stretch (), melt elongational behavior of LCB-PP is characterized by the MSF parameters, β=2 (typical of LCB melts), and (which corresponds to a maximum stretch of molecular chains by a factor of 15). By extruding LCB-PP, a refining effect is observed similar to the refining effects seen in low density polyethylene (LDPE), which reduces the steady-state elongational viscosity and reduces to 121. A second-order mixing rule for the fractional relaxation moduli, g _i , was found to show good agreement with the linear-viscoelastic data of the blends. To simulate the elongational viscosities of the L-PP/LCB-PP blends, a similar second-order mixing rule was used for the MSF parameter, β, while a first-order mixing rule was found to be appropriate for . This allows for a quantitative prediction of the time-dependent elongational viscosities of all L-PP/LCB-PP blends on the basis of the linear and nonlinear parameters of the mixing components L-PP and LCB-PP only. Comparison between the steady-state elongational viscosities as obtained from creep experiments shows good agreement with predictions.     

Homotopy analysis method for multiple solutions of the fractional Sturm-Liouville problems

In this paper, Homotopy Analysis Method (HAM) is applied to numerically approximate the eigenvalues of the fractional Sturm-Liouville problems. The eigenvalues are not unique. These multiple solutions, i.e., eigenvalues, can be calculated by starting the HAM algorithm with one and the same initial guess and linear operator L\mathcal{L}. It can be seen in this paper that the auxiliary parameter (^h/_2p),\hbar, which controls the convergence of the HAM approximate series solutions, has another important application. This important application is predicting and calculating multiple solutions.     

Antiferromagnetic half-metallicity of transition metal nitrides under volume expansion

The transition metal pnictides ABX₂ have been recently proposed as half-metallic fully compensated ferrimagnets, also briefly referred to as half-metallic “antiferromagnets” [N. Long, M.Ogura, H. Akai, J. Phys.: Condens. Matter 21, 064241 (2009)]. In this work we carry out a systematic study of the more promising cases of the transition metal nitrides MnCoN₂ and NiCrN₂ on the basis of density functional theory in the framework of full-potential linearized augmented plane wave method. The electronic structures and the magnetic properties of the above hypothetical compounds in Zinc-blende-type, NaCl-type, and Wurtzite-type structure are calculated within generalized gradient approximation. The results reveal that, although these compounds are metallic in their bulk equilibrium in all three structures, they exhibit antiferromagnetic half-metallicity under negative stress or volume expansion in a limited range of lattice parameters, which is significantly larger than the equilibrium values. This suggests that a situation in which half-metallicity may arise, is when these compounds are coated on semiconducting layers of larger lattice constant.