A combined temperature-dependent electron and single-crystal X-ray diffraction study of the fresnoite compound Rb2VV2O8

High-purity Rb₂V₃O₈ has been grown and temperature-dependent electron and single-crystal X-ray diffraction used to carefully investigate its fresnoite-type reciprocal lattice. In contrast to other recently investigated representatives of the fresnoite family of compounds, Rb₂V₃O₈ is not incommensurately modulated with an incommensurate basal plane primary modulation wave vector given by q∼0.3 〈110〉^*. A careful low-temperature electron diffraction study has, however, revealed the existence of weak incommensurate satellite reflections characterized by the primitive primary modulation wave vector q₁∼0.16c^*. The reciprocal space positioning of these incommensurate satellite reflections, the overall (3+1)-d superspace group symmetry, as well as the shapes of the refined displacement ellipsoids determined from single-crystal XRD refinement, are all consistent with their arising from a distinct type of condensed rigid unit modes (RUMs) of distortion of the Rb₂V₃O₈ parent structure.     

Optimization of Photooxidative Removal of Phenazopyridine from Water

The photooxidative removal of analgesic pharmaceutical compound phenazopyridine (PhP) from aqueous solutions by UV/H₂O₂ system with a re-circulated photoreactor was investigated. Response surface methodology (RSM) was employed to optimize the effect of operational parameters on the photooxidative removal efficiency. The investigated variables were: the initial PhP and H₂O₂ concentrations, irradiation time, volume of solution and pH. The analysis of variance (ANOVA) of quadratic model demonstrated that the described model was highly significant. The predicted values of the photooxidative removal efficiency were found to be in a fair agreement with experimental values (R² = 0.9832, adjusted R² = 0.9716). The model predicted that the optimal reaction conditions for a maximum removal of PhP (>98%) were: initial PhP concentration less than 23 mg L^–1, initial concentration of H₂O₂ higher than 470 mg L^–1, solution volume less than 500 mL, pH close to 2 and irradiation time longer than 6 min.     

Synthesis of Novel 1‐(Benzo[d]thiazol‐2‐yl)‐1H‐pyrrol‐2(5H)‐ones

The titled products comprising of two mutually merged bioactive nucleuses, 2‐aminobenzo[d]thiazole and 2,5‐dihydropyrrole rings, were obtained from the reaction between dialkyl acetylenedicarboxylates and alkyl 2‐(benzo[d]thiazol‐2‐yl)amino‐2‐oxoacetates in the presence of triphenylphosphine at RT.     

Analyzing solubility of acid gas and light alkanes in triethylene glycol

Physical solvents such as ethylene glycol （EG）, diethylene glycol （DEG）, and triethylene glycol （TEG） are commonly used in wet gas dehydration processes with TEG being the most popular due to ease of regeneration and low solvent losses. Unfortunately, TEG absorbs significantly more hydrocarbons and acid gases than EG or DEG. Quantifying this amount of absorption is therefore critical in order to minimize hydrocarbon losses or to optimize hydrocarbon recovery depending on the objective of the process. In this article, a new correlation that fully covers the operating ranges of TEG dehydration units is developed in order to determine the solubility of light alkanes and acid gases in TEG solvent. The influence of several parameters on hydrocarbon and acid gas solubility including temperature, pressure, and solvent content is also examined.     

The electrospun poly(ε‐caprolactone)/fluoridated hydroxyapatite nanocomposite for bone tissue engineering

Biodegradable cell‐incorporated scaffolds can guide the regeneration process of bone defects such as physiological resorption, tooth loss, and trauma which medically, socially, and economically hurt patients. Here, 0, 5, 10, and 15 wt% fluoridated hydroxyapatite (FHA) nanoparticles containing 25 wt% F^? and 75 wt% OH^? were incorporated into poly(ε‐caprolactone) (PCL) matrix to produce PCL/FHA nanocomposite scaffolds using electrospinning method. Then, scanning electron microscopy (SEM), X‐ray diffraction (XRD) pattern, and Fourier transform infrared spectroscopy (FTIR) were used to evaluate the morphology, phase structure, and functional groups of prepared electrospun scaffolds, respectively. Furthermore, the tensile strength and elastic modulus of electrospun scaffolds were investigated using the tensile test. Moreover, the biodegradation behavior of electrospun PCL/FHA scaffolds was studied by the evaluation of weight loss of mats and the alternation of pH in phosphate buffer saline (PBS) up to 30 days of incubation. Then, the biocompatibility of prepared mats was investigated by culturing MG‐63 osteoblast cell line and performing MTT assay. In addition, the adhesion of osteoblast cells on prepared electrospun scaffolds was studied using their SEM images. Results revealed that the fiber diameter of prepared electrospun PCL/FHA scaffolds alters between 700 and 900 nm. The mechanical assay illustrated the mat with 10 wt% FHA nanoparticles revealed the highest tensile strength and elastic modulus. The weight loss alternation of mats determined around 1% to 8% after 30 days of incubation. The biocompatibility and cell adhesion of mats improved by increasing the amounts of FHA nanoparticles.     

Effect of surface polarity on wettability and friction coefficient of silicone rubber/poly(acrylic acid) hydrogel composite

Water absorption, surface energetic, and friction coefficient of filled silicone rubber composites containing different amounts of a superadsorbent hydrogel, poly(acrylic acid) (PAA), were investigated. Measurements were performed in two different time windows, 1 and 5 weeks, to study the effect of hydration time on surface polarity of the samples. It was shown that water absorption increased consistently with hydrogel content and that prolongation of hydration time led to a marked increase in surface tension and polarity. Friction, as measured by a solid–solid contact method in phosphate buffer saline, showed strong dependence on polarity of the composite surface. Results demonstrate that the surface of the composite continued to evolve after the bulk had reached equilibrium swelling and the surface tension reached that of PAA after 5 weeks of hydration time.     

Particle trapping using dielectrophoretically patterned carbon nanotubes

This study presents the dielectrophoretic (DEP) assembly of multi‐walled carbon nanotubes (MWCNTs) between curved microelectrodes for the purpose of trapping polystyrene microparticles within a microfluidic system. Under normal conditions, polystyrene particles exhibit negative DEP behaviour and are repelled from microelectrodes. Interestingly, the addition of MWCNTs to the system alters this situation in two ways: first, they coat the surface of particles and change their dielectric properties to exhibit positive DEP behaviour; second, the assembled MWCNTs are highly conductive and after the deposition serve as extensions to the microelectrodes. They establish an array of nanoelectrodes that initiates from the edge of microelectrodes and grow along the electric field lines. These nanoelectrodes can effectively trap the MWCNT‐coated particles, since they cover a large portion of the microchannel bottom surface and also create a much stronger electric field than the primary microelectrodes as confirmed by our numerical simulations. We will show that the presence of MWCNT significantly changes performance of the system, which is investigated by trapping sample polystyrene particles with plain, COOH and goat anti‐mouse IgG surfaces.     

Electrokinetic transport through nanochannels

This article presents a numerical study of the electrokinetic transport phenomena (electroosmosis and electrophoresis) in a three-dimensional nanochannel with a circular cross-section. Due to the nanometer dimensions, the Boltzmann distribution of the ions is not valid in the nanochannels. Therefore, the conventional theories of electrokinetic flow through the microchannels such as Poisson-Boltzmann equation and Helmholtz-Smoluchowski slip velocity approach are no longer applicable. In the current study, a set of coupled partial differential equations including Poisson-Nernst-Plank equation, Navier-Stokes, and continuity equations is solved to find the electric potential field, ionic concentration field, and the velocity field in the three-dimensional nanochannel. The effects of surface electric charge and the radius of nanochannel on the electric potential, liquid flow, and ionic transport are investigated. Unlike the microchannels, the electric potential field, ionic concentration field, and velocity field are strongly size-dependent in nanochannels. The electric potential gradient along the nanochannel also depends on the surface electric charge of the nanochannel. More counter ions than the coions are transported through the nanochannel. The ionic concentration enrichment at the entrance and the exit of the nanochannel is completely evident from the simulation results. The study also shows that the flow velocity in the nanochannel is higher when the surface electric charge is stronger or the radius of the nanochannel is larger.     

Spreading of triple line and dynamics of bubble growth inside nanoparticle dispersions on top of a substrate plate

This work investigates the feasibility of engineering surface wettability by using different nanoparticles. As an illustration, detailed formation of gas bubbles on top of a stainless steel substrate plate in a quiescent pool of aqueous gold and alumina nanofluids is studied. The presence of nanoparticles is shown to be able to modify the dynamics of triple line and bubble growth significantly. An early pinning of the bubble triple line is observed and a larger bubble contact angle is found for bubbles growing in a gold nanofluid, whereas an opposite phenomenon is observed for bubbles growing in an alumina nanofluid compared to those of pure water. Other bubble parameters such as departure volume, bubble frequency, and waiting time of bubble formation are also affected by the presence of nanoparticles. The variation of solid surface tensions due to the existence of nanoparticles and the resultant force at the triple line should be responsible for such differences. Such results illustrate the big potential of nanoparticle in engineering surface wettability of a solid-liquid-gas system.     

HNO(H<Subscript>2</Subscript>O)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 1–4) clusters: a theoretical study

The geometrical structure, binding energy, and vibrational spectra of small clusters of nitrosyl hydride (HNO) and water molecules, HNO(H₂O) _n , where (n = 1–4), have been investigated at the MP2 level of theory, using 6-311++G(2d,2p) basis set. We located three dimers, six trimers, nine tetramers, and three pentamers at the MP2/6-311++G(2d,2p) computational level. Particular attention is given to existence and magnitude of NH···O blue-shifting hydrogen bonds. Blue shifts of the NH stretching frequency upon complex formation in the ranges between 28 and 151 cm⁻¹ is predicted. Cooperative effect in terms of stabilization energy along with the many-body interaction energies analysis was performed for the studied clusters. The Atoms in Molecules (AIM) theory was also applied to explain the nature of the complexes.