Structure and Reactivity of Lithium Enolates. From Pinacolone to Selective C-Alkylations of Peptides. Difficulties and Opportunities Afforded by Complex Structures

The chemistry of lithium enolates is used to demonstrate that complex structures held together by noncovalent bonds (“supramolecules”) may dramatically influence the result of seemingly simple standard reactions of organic synthesis. Detailed structural data have been obtained by crystallographic investigations of numerous Li enolates and analogous derivatives. The most remarkable features of these structures are aggregation to give dimers, tetramers, and higher oligomers, complexation of the metal centers by solvent molecules and chelating ligands, and hydrogen-bond formation of weak acids such as secondary amines with the anionoid part of the enolates. The presence in nonpolar solvents of the same supramolecules has been established by NMR-spectroscopic, by osmometric, and by calorimetric measurements. The structures and the order of magnitude of the interactions have also been reproduced by ab-initio calculations. Most importantly, supramolecules may be product-forming species in synthetic reactions of Li enolates. A knowledge of the complex structures of Li enolates also improves our understanding of their reactivity. Thus, simple procedures have been developed to avoid complications caused by secondary amines, formed concomitantly with Li enolates by the common methods. Mixtures of achiral Li enolates and chiral Li amides can give rise to enantioselective reactions. Solubilization by LiX is observed, especially of multiply lithiated compounds. This effect is exploited for alkylations of N-methylglycine (sarcosine) CH₂ groups in open-chain oligopeptides. Thus, the cyclic undecapeptide cyclosporine, a potent immunosuppressant, is converted into a THF-soluble hexalithio derivative (without epimerization of stereogenic centers) and alkylated by a variety of electrophiles in the presence of either excess lithiumdiisopropyl amide or of up to 30 equivalents of lithium chloride. Depending on the nature of the LiX additive, a new stereogenic center of (R) or (S) configuration is created in the peptide chain by this process. A structure-activity correlation in the series of cyclosporine derivatives thus available is discussed.     

Transition metal nitrosyls as nitrosylation agents : II.Photo-nitrosylation of η5-C5H5V(CO)3L(L = CO,Pz3) by [Co(NO)2Br]2

η⁵-C₅H₅V(NO)₂CO is prepared in 40% yield by the photo-reaction between η⁵-C₅H₅V(CO)₄ and [Co(NO)₂Br]₂.η⁵-C₅H₅V(NO)₂CO reacts by an S_N1 mechanism with various phosphines PZ₃ to yield η⁵-C₅-H₅V(NO)₂PZ₃. The phosphine complexes are also obtained by photo-induced ligand interchange between η⁵-C₅H₅V(CO)₃PZ₃ and [Co(NO)₂Br]₂, or η⁵-C₅H₅V(CO)₄ and Co(NO)₂Br(PZ₃). In all cases, the main cobalt species formed is Co(NO)(CO)₃. While the one-bond vanadiumphosphorus coupling constants of most of the phosphine complexes are virtually the same (ca 410 Hz),the chemical shift values δ(⁵¹V) (?1328 to ?973 ppm rel. VOCl₃) decrease in the order PF₃ > CO > P(OR)₃ > P(alkyl)₃ > PPh₃ > PPh(NEt₂)₂, reflecting the decreasing π-acceptor ability of the ligands. δ(⁵¹V) also decreases in the series of alkylphosphines PR₃ (R = Me, Et, Prⁿ, Buⁱ, Prⁱ, BU^t) as the cone angle of PR₃increases.     

Preparation of polycrystalline Ti-Al-O films by magnetron sputtering ion plating: constitution, structure and morphology

Ti-Al-O layers were deposited on Si-<100> wafers at 500 °C by means of reactive magnetron sputtering ion plating (R-MSIP). An Al-target was sputtered in rf-mode and a Ti-target in dc-mode simultaneously by an oxygen/argon plasma. The influence of the Al- and Ti-sputter powers on composition, structure, and morphology of the Ti-Al-O layers and the binding states of the components were investigated. The analysis with EPMA, XPS, AES and TEM yielded the following results: Ti-Al-O coatings with different Ti, Al, and O contents in the range of TiO₂ to Al₂O₃ were grown. TEM structure analysis revealed: the pure TiO₂ film consisted of the tetragonal phases rutile and anatase; the two structures were found in the titanium-rich Ti-Al-O film, too, but with significant smaller lattice constants. The aluminium-rich Ti-Al-O film displayed the same cubic structure of γ-Al₂O₃ as determined for the pure Al₂O₃ film, but the lattice constant is significant lower. Evaluation of the TEM pattern of the film with a Ti/Al ratio of 0.8 indicates a hexagonal structure with lattice constants similar to those of κ′-Al₂O₃. All films are nanocrystalline and not textured. Received: 24 June 1996 / Revised: 27 December 1996 / Accepted: 4 January 1997     

Coupling reactions of alpha-(N-carbamoyl)alkylcuprates with enol triflates derived from cyclic beta-keto esters: A facile approach to gamma-carbamoyl-alpha,beta-enoates

alpha-(N-Carbamoylalkyl)cuprates couple with enol triflates derived from carbocyclic and heterocyclic (i.e., piperidinones) beta-keto esters. Product yields are higher with the alkyl(cyano)cuprates [i.e., RCu(CN)Li, 56-93%] than with the dialkylcuprate reagents (i.e., R(2)CuLi.LiCN). An enol nonaflate works as well as the corresponding enol triflate. A facile synthetic route to gamma-amino alpha,beta-enoates not readily prepared from gamma-keto-alpha,beta-enoates is thus established. The gamma-amino-alpha,beta-enoates, available via N-Boc deprotection, can be cyclized to annulated pyrrolin-2-ones.     

Chiral bidentate aminophosphine ligands: synthesis, coordination chemistry and asymmetric catalysis

Chiral aminophosphines Ph2PN(R)(CH2)nN(R)PPh2 1-4 [n= 2, R = CH(CH3)(Ph) 1; n= 3, R = CH(CH2CH3)(Ph) 2, n= 2, R = CH(CH3)(1-naphthyl) 3; n= 2, R = CH(CH3)(C6H11) 4] were synthesized by the reaction of ClPPh2 with the appropriate easily accessible enantiopure amine building blocks. For compounds 1 and 2, the corresponding selenides 5 and 6 were prepared to determine the electronic character of the phosphine moieties. By reaction of 1 with either PdCl2(cod) or PdCl(CH3)(cod) the cis-complexes 7 and 8 were obtained. The molecular structure for complex 7, cis-[PdCl2(1)], was determined by X-ray crystallography. Reaction of PtCl2(cod) with 1 or 2 yielded the corresponding monomeric cis-isomers 9 and 10. The rhodium derivative [RhCl(CO)(1)] (11) was obtained as a mixture of cis and trans-isomers. Preliminary results in the rhodium catalyzed hydroformylation of styrene and vinyl acetate, with ee's up to 51% and high regioselectivities, showed the potential of these chiral aminophosphines for homogeneous catalysis.     

Synthesis of Hexadentate Hexahydro-1,3,5-triazine-Based Ligands and their Copper(I) Complexes

Summary.  Hexadentate ligands were formed by the reaction of primary dimethylaminoethyl- or methoxyethylamines with formaldehyde. The resulting N, N′, N″-functionalized hexahydro-1,3,5-triazines contain pending amino or ether functionalities which are able to coordinate to metals in addition to the ring nitrogen atoms. Both ligands were reacted with CuBr, and novel tricopper clusters were isolated and characterized by X-ray structure analysis. In these compounds a ring nitrogen atom, the pending amino or ether functionality, and two bridging bromine atoms coordinate each of the copper atoms. Received January 22, 2002; accepted (revised) March 22, 2002     

Perfluoralkyljod-verbindungen: Darstellungen und eigenschaften von CF3JO,CF3JOF2 und CF3JO2

Perfluoroalkyl iodine compounds: preparations and properties of CF₃IO, CF₃IOF₂, and CF₃IO₂. The trifluoromethyl iodine compounds CF₃IO, CF₃IOF₂, and CF₃IO₂ are formed from the reactions of CF₃I, CF₃IF₂ or CF₃IF₄ with ozone or silicon dioxide respectively. Their preparartions, properties, ¹⁹F-nmr spectra, and ir spectra are described.     

Enantioselective Preparation of 2‐Aminomethyl Carboxylic Acid Derivatives: Solving the β2‐Amino Acid Problem with the Chiral Auxiliary 4‐Isopropyl‐5,5‐diphenyloxazolidin‐2‐one (DIOZ). Preliminary Communication

Multigram amounts of suitably protected β²‐amino acids with 17 of the 20 proteinogenic side chains are prepared by diastereoselective reactions of Li, B, or Ti enolates of the corresponding 3‐acyl‐4‐isopropyl‐5,5‐diphenyloxazolidin‐2‐ones (acyl‐DIOZ; 1 ) with appropriate electrophiles (amidomethylation, hydroxyalkylation, (benzyloxycarbonyl)methylation) in yields of 55–90% and with diastereoselectivities of 80 to >97% (Scheme). The primary products 2 – 8 thus obtained are converted to protected β²‐amino acids by standard procedures (Table 1). Many of the DIOZ derivatives are highly crystalline compounds (31 X‐ray crystal structures in Table 2). The chiral auxiliary DIOZ, readily prepared in either enantiomeric form, is recovered with high yield.     

Synthese monodisperser linearer und cyclischer Oligomere der (R)-3-Hydroxybuttersäure mit bis zu 128 Einheiten

Monodisperse Linear and Cyclic Oligo[(R)-3-hydroxybutanoates] Containing up to 128 Monomeric Units Using benzyl ester/(tert-butyl)diphenylsilyl ether protection, (COCl)₂/pyridine esterification conditions, and a fragment-coupling strategy (with H₂/Pd-C debenzylation and HF · pyridine desilylation), linear oligomers of (R)-3-hydroxybutanoic acid (3-HB) containing up to 128 3-HB building blocks (mol. weight > 11 000 Da) are assembled (Schemes 1,2,5, and 6). In contrast to the previously employed protecting-group combination, and due to the low-temperature esterifying conditions, this procedure leads to monodisperse oligomers: all steps occur without loss of single 3-HB units. The product oligomers with two, one, and no terminal protecting groups (mostly prepared in multi-gram amounts) are characterized by all standard spectroscopic methods, especially by mass spectroscopy (Figs. 2 and 3), by their optical activity, and by elemental analyses. Cyclization of the oligo[(R)-3-hydroxybutanoic acids] with up to 32 3-HB units, using thiopyridine activation and CuBr₂ for the ring closure, produces oligolides consisting of up to 128 ring atoms (Scheme 7). Mixed oligolides containing 3-HB and (R)-3-hydroxypentanoic units are prepared from the corresponding linear trimers, using Yamaguchi's method for the ring closure (Scheme 8 and Fig.4 (X-ray crystal structures of two folded conformers)). Comparisons of melting points (Table 1), of [α] values (Tables 2 and 3), of ¹H-NMR coupling constants (Table 3), and of molecular volume/hydroxyalkanoate unit (Table 4) of linear and cyclic oligomer derivatives and of the high-molecular-weigh polymer show that the monodisperse oligomers appear to be surprisingly good models for the polymer. Besides this insight, our synthesis is supplying the samples to further test the role of P(3-HB) (ca. 140 units) as a component of complexes forming channels through cell-wall phospholipid bilayers.     

PHYTOCHROME EVOLUTION: A PHYLOGENETIC TREE WITH THE FIRST COMPLETE SEQUENCE OF PHYTOCHROME FROM A CRYPTOGAMIC PLANT: (Selaginella martensii SPRING)

We have sequenced cDNA and genomic clones coding for phytochrome of the fern Selaginella. On the amino acid level, this phytochrome shares sequence homologies with phytochromes of higher plants which range between 62 (phytochrome B of Arabidopsis) and 55 (56)% [phytochrome C of Arabidopsis (Avena)]. Introns in the Selaginella gene are short and occupy positions known from phytochrome sequences of higher plants. A rooted phylogenetic tree based on mutation distances puts Selaginella phytochrome closest to the hypothetical ancestor. A similar tree arises if the tree is constructed with partial sequences (about 200 amino acids) around the chromophore attachment site. An extension of this tree by sequences of other cryptogamic plants (Mougeotia, Ceratodon, Psilotum) shows all these sequences including those of the phytochromes B and C of Arabidopsis on a branch, well separated from the branch formed by phytochromes known to accumulate in etiolated plants. The rooted phytochrome phylogenetic tree, however, is difficult to reconcile with the fossil record.