Design and construction of an quasi-adiabatic dissolution calorimeter with a novel dosing apparatus and a low heat capacity

A quasi-adiabatic calorimeter for determining the molar solution enthalpies (Δ_sol H) of non-volatile solids was constructed. The design of the instrument was adjusted to allow the determination of solution enthalpies of small amounts of solids. For that purpose, the novel apparatus for sample dosage with virtually negligible “blank heat” was built. The rather low heat capacity of the calorimeter was achieved by reducing the volume of the reaction cell (20 mL), the dosing unit, and electric elements (the thermistor and the heater). Good thermal isolation of the reaction cell from the surroundings was accomplished by placing the cell into an evacuated polypropylene vessel. A computer program for processing the calorimetric data according to modified Regnault–Pfaundler method was written. The performance of the calorimeter was tested by determining the heats of the reactions serving as thermochemical standards at 25 °C (the dissolution of KCl and NaCl in water and the dissolution of tris(hydroxymethyl)-aminomethane in 0.1 mol dm^?3 HCl(aq)). The obtained data were in very good agreement with the literature values.     

基于相关因素的遥感影像辐射质量度量模型研究

目前遥感影像辐射质量评价多以目视判读为主,具有很强的主观性。针对如何客观、全面地评价遥感影像辐射质量这一问题,本文研究了一种利用质量相关因素来评价遥感影像辐射质量的度量模型。该模型提取遥感影像的四个因素指标,即亮度、清晰度、信息量和纹理特征,采用相关分析法计算各个因素指标的权值。对于清晰度指标,通过改进梯度函数,研究了新的清晰度提取方法。实验证明,对于多种不同类型的遥感影像,本模型所得的评价结果可较好地符合人眼的视觉感受。该遥感影像辐射质量度量模型能够客观、定量地分析遥感影像辐射质量,同时与主观评价具有一致性。     

Carbon Nanotubes/Heteroatom‐Doped Carbon Core–Sheath Nanostructures as Highly Active,Metal‐Free Oxygen Reduction Electrocatalysts for Alkaline Fuel Cells

A facile, scalable route to new nanocomposites that are based on carbon nanotubes/heteroatom‐doped carbon (CNT/HDC) core–sheath nanostructures is reported. These nanostructures were prepared by the adsorption of heteroatom‐containing ionic liquids on the walls of CNTs, followed by carbonization. The design of the CNT/HDC composite allows for combining the electrical conductivity of the CNTs with the catalytic activity of the heteroatom‐containing HDC sheath layers. The CNT/HDC nanostructures are highly active electrocatalysts for the oxygen reduction reaction and displayed one of the best performances among heteroatom‐doped nanocarbon catalysts in terms of half‐wave potential and kinetic current density. The four‐electron selectivity and the exchange current density of the CNT/HDC nanostructures are comparable with those of a Pt/C catalyst, and the CNT/HDC composites were superior to Pt/C in terms of long‐term durability and poison tolerance. Furthermore, an alkaline fuel cell that employs a CNT/HDC nanostructure as the cathode catalyst shows very high current and power densities, which sheds light on the practical applicability of these new nanocomposites.     

Interconvertable modular framework and layered lanthanide(III)-etidronic acid coordination polymers

Isostructural modular microporous Na2[Y(hedp)(H2O)0.67] and Na4[Ln2(hedp)2(H2O)2].nH2O (Ln = La, Ce, Nd, Eu, Gd, Tb, Er) framework-type, and layered orthorhombic [Eu(H2hedp)(H2O)2].H2O and Na0.9[Nd0.9Ge0.10(Hhedp)(H2O)2], monoclinic [Ln(H2hedp)(H2O)].3H2O (Ln = Y, Tb), and triclinic [Yb(H2hedp)].H2O coordination polymers based on etidronic acid (H5hedp) have been prepared by hydrothermal synthesis and characterized structurally by (among others) single-crystal and powder X-ray diffraction and solid-state NMR. The structure of the framework materials comprises eight-membered ring channels filled with Na+ and both free and lanthanide-coordinated water molecules, which are removed reversibly by calcination at 300 degrees C (structural integrity is preserved up to ca. 475 degrees C), denoting a clear zeolite-type behavior. Interesting photoluminescence properties, sensitive to the hydration degree, are reported for Na4[Eu2(hedp)2(H2O)2].H2O and its fully dehydrated form. The 3D framework and layered materials are, to a certain extent, interconvertable during the hydrothermal synthesis stage via the addition of HCl or NaCl: of the 3D framework Na4[Tb2(hedp)2(H2O)2].nH2O, affords layered [Tb(H2hedp) (H2O)].3H2O, whereas layered [Tb(H2hedp)(H2O)2].H2O reacts with sodium chloride yielding a material similar to Na4[Tb2(hedp)2(H2O)2].nH2O. In layered [Y(H2hedp)(H2O)].3H2O, noncoordinated water molecules are engaged in cooperative water-to-water hydrogen-bonding interactions, leading to the formation of a (H2O)13 cluster, which is the basis of an unprecedented two-dimensional water network present in the interlayer space.     

Magnetic exchange interactions and magneto-structural correlations in heterobridged μ-phenoxo-μ(1,1)-azide dinickel(II) compounds: a combined experimental and theoretical exploration

This investigation presents the syntheses, crystal structures, magnetic properties, and density functional theoretical modeling of magnetic behavior of two heterobridged μ-phenoxo-μ(1,1)-azido dinickel(II) compounds [Ni(II)(2)(L(1))(2)(μ(1,1)-N(3))(N(3))(H(2)O)]·CH(3)CH(2)OH (1) and [Ni(II)(2)(L(2))(2)(μ(1,1)-N(3))(CH(3)CN)(H(2)O)](ClO(4))·H(2)O·CH(3)CN (2), where HL(1) and HL(2) are the [1+1] condensation products of 3-methoxysalicylaldehyde and 1-(2-aminoethyl)-piperidine (for HL(1))/4-(2-aminoethyl)-morpholine (for HL(2)), along with density functional theoretical magneto-structural correlations of μ-phenoxo-μ(1,1)-azido dinickel(II) systems. Compounds 1 and 2 crystallize in orthorhombic (space group Pbca) and monoclinic (space group P2(1)/c) systems, respectively. The coordination environments of both metal centers are distorted octahedral. The variable-temperature (2-300 K) magnetic susceptibilities at 0.7 T of both compounds have been measured. The interaction between the metal centers is moderately ferromagnetic; J = 16.6 cm(-1), g = 2.2, and D = -7.3 cm(-1) for 1 and J = 16.92 cm(-1), g = 2.2, and D(Ni1) = D(Ni2) = -6.41 cm(-1) for 2. Broken symmetry density functional calculations of exchange interaction have been performed on complexes 1 and 2 and provide a good numerical estimate of J values (15.8 cm(-1) for 1 and 15.35 cm(-1) for 2) compared to experiments. The role of Ni-N bond length asymmetry on the magnetic coupling has been noted by comparing the structures and J values of complexes 1 and 2 together with previously published dimers 3 (Eur. J. Inorg. Chem. 2009, 4982), 4 (Inorg. Chem. 2004, 43, 2427), and 5 (Dalton Trans. 2008, 6539). Our extensive DFT calculations reveal an important clue to the mechanism of coupling where the orientation of the magnetic orbitals seems to differ with asymmetry in the Ni-N bond lengths. This difference in orientation leads to a large change in the overlap integral between the magnetic orbitals and thus the magnetic coupling. DFT calculations have also been extended to develop several magneto-structural correlations in this type of complexes and the correlation aim to focus on the asymmetry of the Ni-N bond lengths reveal that the asymmetry plays a proactive role in governing the magnitude of the coupling. From a completely symmetric Ni-N bond length, two behaviors have been noted: with a decrease in bond length there is an increase in the ferromagnetic coupling, while an increase in the bond lengths leads to a decrease in ferromagnetic interaction. The later correlation is supported by experiments. The magnetic properties of 1, 2, and three previously reported related compounds have been discussed in light of the structural parameters and also in light of the theoretical correlations determined here.     

Study of the inhibiting effect of a quaternary ammonium surfactants mixture synthesized from petroleum fraction (reformate) against the carbon steel corrosion in HCl 1 M

Quaternary ammonium cationic surfactants were synthesized from reformate, a liquid mixture of hydrocarbons (aromatics, naphthenes and paraffins), via chloromethylation/quaternization sequences. The petroleum surfactants thus obtained were evaluated as corrosion inhibitors for carbon steel in 1 M HCl, by gravimetry, potentiodynamic polarization and electrochemical impedance spectroscopy. The corrosion inhibiting efficiency was assessed as functions of surfactant concentration. The results showed that the inhibiting efficiency increased with surfactant concentration; its optimal value of 70 % was for a surfactant concentration of 320 mg/L at 25 °C. Potentiodynamic polarization measurements showed that the mixture acts as a mixed type inhibitor. The corrosion inhibiting mechanism is thought to proceed via an adsorption of the surfactant molecules on the steel surface, generating a film and hindering the active sites. Our experimental adsorption data were found to obey the Langmuir adsorption isotherm. SEM images of the treated specimens, revealing the likely formation of a protective film, demonstrated the inhibiting capacity of the petroleum quaternary ammonium surfactants against the carbon steel corrosion.     

Characterization of a Robust CoII Fluorescent Complex Deposited Intact On HOPG

The new diimine fluorescent ligand ACRI‐1 based on a central acridine yellow core is reported along with its coordination complex [Co₂( ACRI‐1 )₂] ( 1 ), a fluorescent weak ferromagnet. Due to the strong fluorescence of the acridine yellow fluorophore, it is not completely quenched when the ligand is coordinated to Co^II. The magnetic properties of bulk complex 1 and its stability in solution have been studied. Complex 1 has been deposited on highly ordered pyrolitic graphite (HOGP) from solution. The thin films prepared have been characterized by AFM, time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS), grazing incidence X‐ray diffraction (GIXRD), X‐ray absorption spectroscopy (XAS), X‐ray magnetic circular dichroism (XMCD) and theoretical calculations. The data show that the complex is robust and remains intact on the surface of graphite.     

Electrochemical Oxidation of Donepezil and Its Voltammetric Determination at Gold Electrode

The oxidative ability of donepezil, a frequently prescribed drug for the treatment of Alzheimer’s disease is reported for the first time at a gold electrode. It was oxidized by cyclic voltammetry and determined by square wave voltammetry in phosphate buffer electrolyte. Electrochemical degradation of donepezil was carried out by long term potential cycling. The identification and characterization of the major product, isolated by preparative high performance liquid chromatography, was performed by high resolution mass spectrometry and 1D and 2D nuclear magnetic resonance spectroscopy. Donepezil hydroxy derivative was identified as the major electrochemical oxidation product from donepezil.     

Analysis of monoclonal antibody by a novel CE‐UV/MALDI‐MS interface

mAbs are highly complex proteins that present a wide range of microheterogeneity that requires multiple analytical methods for full structure assessment and quality control. As a consequence, the characterization of mAbs on different levels is particularly product‐ and time‐consuming. CE‐MS couplings, especially to MALDI, appear really attractive methods for the characterization of biological samples. In this work, we report the last instrumental development and performance of the first totally automated off‐line CE‐UV/MALDI‐MS/MS. This interface is based on the removal of the original UV cell of the CE apparatus, modification of the spotting device geometry, and creation of an integrated delivery matrix system. The performance of the method was evaluated with separation of five intact proteins and a tryptic digest mixture of nine proteins. Intact protein application shows the acquisition of electropherograms with high resolution and high repeatability. In the peptide mapping approach, a total number of 154 unique identified peptides were characterized using MS/MS spectra corresponding to average sequence coverage of 64.1%. Comparison with NanoLC/MALDI‐MS/MS showed complementarity at the peptide level with an increase of 42% when using CE/MALDI‐MS coupling. Finally, this work represents the first analysis of intact mAb charge variants by CZE using an MS detection. Moreover, using a peptide mapping approach CE‐UV/MALDI‐MS/MS fragmentation allowed 100% sequence coverage of the light chain and 92% of the heavy chain, and the separation of four major glycosylated peptides and their structural characterization.     

5‐O‐Caffeoylshikimic acid from Solanum somalense leaves: Advantage of centrifugal partition chromatography over conventional column chromatography

Solanum somalense leaves, used in Djibouti for their medicinal properties, were extracted by MeOH. Because of the high polyphenol and flavonoid contents of the extract, respectively, determined at 80.80 ± 2.13 mg gallic acid equivalent/g dry weight and 24.4 ± 1.01 mg quercetin equivalent/g dry weight, the isolation and purification of the main polyphenols were carried out by silica gel column chromatography and centrifugal partition chromatography. Column chromatography led to 11 enriched fractions requiring further purification, while centrifugal partition chromatography allowed the easy recovery of the main compound of the extract. In a solvent system composed of CHCl₃/MeOH/H₂O (9.5:10:5), 21.8 mg of this compound at 97% purity was obtained leading to a yield of 2.63%. Its structure was established as 5‐O‐caffeoylshikimic acid by mass spectrometry and NMR spectroscopy. This work shows that S. somalense leaves contain very high level of 5‐O‐caffeoylshikimic acid (0.74% dry weight), making it a potential source of production of this secondary metabolite that is not commonly found in nature but could be partly responsible of the medicinal properties of S. somalense leaves.