Pulse compression and fiber delivery of 45 fs Fourier transform limited pulses at 830 nm

A specific scheme is used for fiber delivery of ultrashort pulses using conventional elements. Starting from a standard femtosecond Ti:Al(2)O(3) oscillator (150 fs @ 830 nm), perfectly compressed ultrashort pulses with a duration of 45 fs are produced at the output of a standard two meter long single-mode fiber. The setup allows compensating independently and simultaneously second and third orders of chromatic dispersion as well as management of self-phase modulation in the fiber. It includes an optimized dispersion compensation line made of the assembly of diffraction gratings and prisms. The unsurpassed performances of the device are experimentally and numerically highlighted. Fiber delivery of sub-30 fs multinanojoule pulses is discussed.     

Real-time increase in depth of field of an uncooled thermal camera using several phase-mask technologies

Imaging systems that combine a phase mask in the pupil and digital postprocessing may have better performance than conventional ones. We have built such a system to enhance the depth of field of an uncooled thermal camera. The phase masks are binary, their structures are optimized thanks to an image quality criterion, and they have been realized with three different technologies that give equivalent results. The deconvolution postprocessing is performed in real time with a graphics processing unit. A significant increase of the depth of field of a factor 3 has been obtained.     

Low-Energy Kaon�CNucleon/Nuclei Interaction Studies at DA��NE (SIDDHARTA and AMADEUS Experiments)

The DA??NE electron?Cpositron collider at the Laboratori Nazionali di Frascati of INFN has made available a unique quality low-energy negative kaons ??beam??. The SIDDHARTA experiment used this beam to perform unprecedented precision measurements on kaonic atoms, while the AMADEUS experiment plans to perform in the coming years precision measurements on kaon?Cnuclei interactions at low-energies, in particular to study the kaonic nuclei. The two experiments are briefly presented in this paper.     

The feasibility of Al-based oxide precipitation in Fe–10%Cr alloy by ion implantation

This paper reports the feasibility of nano-oxide precipitate formation in Fe–Cr alloy by ion implantation synthesis. High contents of Al⁺ and O⁺ ions were implanted into thin films of high purity Fe–10%Cr alloy at room temperature and were studied by transmission electron microscopy (TEM) and atom probe tomography (APT). In contrast, to the common two-stage implantation/annealing scheme of precipitate ensemble synthesis by ion beams, cluster formation took place at the implantation stage in our study, requiring no subsequent high-temperature annealing. The post-implantation microstructural examination revealed in the as-implanted thin foil an array of precipitates with diameters in the range of 3–30?nm. The precipitate number density distribution was found to depend on the foil thickness. The precipitate enrichment with both Al and O was confirmed by the energy-filtered TEM analysis. Judging from the electron diffraction pattern and high-resolution TEM analysis, the crystal lattice of precipitates corresponds to some cubic modification of aluminium-rich oxide or pure aluminium oxide. The precipitate lattice alignment with the host matrix was revealed for at least a part of precipitates. The analysis of APT data using cluster detection algorithm indicates the presence of local zones enriched in Al and O, even in those areas of as-implanted samples where no clusters were visible by TEM.     

Acoustic thermometric data on blood flow and thermal output in forearm under physical pressure

The influence of blood flow and thermal output on temperature changes in the human forearm under physical pressure is studied by acoustic thermometry. Compression of the shoulder with a tourniquet decreases blood flow, which make it possible to evaluate the thermal output characteristics only. In calculating the depth temperature of the forearm, the thermal conductivity equation was used and blood flow and additional thermal output sources were taken into account. According to the calculations in which the experimental data were used, the peak depth temperature of the forearm at rest is 36°C. Due to thermal output alone (without blood flow), physical pressure increases this temperature to 37°C, and when both factors are considered, the temperature rises to 38°C. The experiments in question have allowed us to test acoustic thermographic method on subjects, which is an important step in adopting acoustic thermography in clinical practice.     

Time-Ordering and a Generalized Magnus Expansion

Both the classical time-ordering and the Magnus expansion are well known in the context of linear initial value problems. Motivated by the noncommutativity between time-ordering and time derivation, and related problems raised recently in statistical physics, we introduce a generalization of the Magnus expansion. Whereas the classical expansion computes the logarithm of the evolution operator of a linear differential equation, our generalization addresses the same problem, including, however, directly a non-trivial initial condition. As a by-product we recover a variant of the time-ordering operation, known as ${\mathsf{T}^\ast}$ -ordering. Eventually, placing our results in the general context of Rota–Baxter algebras permits us to present them in a more natural algebraic setting. It encompasses, for example, the case where one considers linear difference equations instead of linear differential equations.     

An effective force field for molecular dynamics simulations of dimethyl sulfone

A rigid five-site united atom model for dimethyl sulfone (DMSO₂) compatible with the GROMOS force field is parametrized and tested. The parameters were optimized with respect to experimental quantities such as liquid density, heat of vaporization, shear viscosity and excess free energy. Good agreement with pure component properties is achieved except for the static dielectric permittivity which is calculated too low. Together with the SPC model for water the new DMSO₂ model was used to study aqueous mixtures at low concentrations and compared to aqueous mixtures of DMSO. It is concluded that interaction parameters for sulfoxide oxygen are not directly transferable to sulfonyl oxygen.     

Influence of sintering temperature and aging on properties of cermet Ni/8YSZ materials obtained by citric method

The anode supported cell for solid oxide fuel cell, as a modification of the traditional Ni-YSZ anode supported on electrolyte, is examined in this work. The materials obtained on the base of citric method are presented and investigated in this work. The materials consisted of 40 wt.% Ni/YSZ, 50 wt.% Ni/YSZ and 60 wt.% Ni/YSZ were obtained. The base Ni/YSZ materials are tested on the two ways: (a) aging tests and (b) sintering tests. All the materials after aging and sintering are tested by the impedance spectroscopy. The results of electrical conductivity for samples before and after aging show that only in the case of 40 wt.% Ni/YSZ, sample loses of metallic conductivity after 500 h of heating. The other samples reveal metallic conductivity even after long period of aging. The tests of sintering temperature show that this process does not affect significantly on electrical conductivity of the materials.     

转镜式高速扫描相机时间分辨率的测定

 介绍了产生时间分辨率的原因，测量时间分辨率在高速摄影中的作用，前人曾做过的工作，时间分辨率测定的难点；着重介绍了新的测量方法，给出了实际测定的结果。结果表明，对于GSJ型相机，时间分辨率可达8.6 ns，测量的均方根误差为1.1 ns。     

The 2<Superscript>1/3</Superscript> rule and other properties of ferromagnets near the temperature of the maximum of magnetic susceptibility

The behavior of the magnetization M and the magnetic susceptibility χ is theoretically analyzed for ferromagnets at the temperature T=T _m corresponding to the maximum of the function χ(T). Four new methods of determining the Curie temperature T_C with the use of the derived relationships are proposed. One of these methods is based on the relationship χ(T _m ) =2^1/3χ(T_C) (the 2^1/3 rule). The results are applied for processing experimental data obtained for lanthanum manganite of composition La_0.85Sr_0.15MnO₃.