纳米Fe3O4/高岭土复合粉体制备及其对亚甲基蓝吸附性能研究

以天然高岭土为载体、利用化学共沉淀法成功地制备出纳米Fe3O4/高岭土复合粉体。采用XRD、FSEM对复合粉体的物相组成、粒径、显微结构、形貌进行了表征,并研究了其磁分离性能和对亚甲基蓝(MB)的吸附性能。结果显示,复合粉体中的铁氧化物呈单一的Fe3O4相,Fe3O4晶粒的尺寸为10~30 nm,且均匀负载于高岭石晶体表面。当Fe3O4、高岭土质量比为1∶5时,复合粉体的磁分离率高达90.12%,并具有良好的吸附性能。复合粉体对MB的去除率随着吸附时间的延长、吸附温度的升高、溶液p H的增大和投入量的增加而逐步提高,随着MB溶液初始浓度的增大而逐步减小;对MB的吸附量随初始浓度的增大而逐步增大。     

生长溶液配比对MnTeMoO6晶体形态的影响

采用顶部籽晶溶液法生长Mn Te Mo O6晶体,研究了在不同配比生长溶液中Mn Te Mo O6晶体的实际生长形态,模拟计算了Mn Te Mo O6晶体的理想生长形态,探讨了生长溶液配比对晶体形态的影响,选择的3种生长溶液中Mn Te Mo O6∶Te O2∶Mo O3摩尔比分别为1∶2∶2、1∶3∶2和1∶3∶3。结果表明,在3种配比的生长溶液中Mn Te Mo O6晶体的(110)面具有最大的面网密度和最小的生长速率;生长溶液中Te O2和Mo O3的含量和比例影响了晶体在不同方向的生长速率,从而影响到Mn Te Mo O6晶体的实际生长形态。     

氮杂环卡宾-钯配合物催化Buchwald-Hartwig偶联反应最新研究进展*

钯催化的Buchwald-Hartwig偶联反应是用于构建C-N键非常直接有效的方法。氮杂环卡宾-钯配合物具有性能稳定、催化活性高等优点,是Buchwald-Hartwig偶联反应的高效催化剂。对这一领域近3年的研究进展作简要介绍。     

溶胶-凝胶法制备TiO2-C纳米复合材料的研究

采用溶胶-凝胶法制备了TiO2-C纳米复合材料,利用XRD、SEM和TEM等方法对样品进行分析表征。实验结果表明:网络诱导剂的加入有利于样品在室温下静置后更快凝胶,经600℃焙烧3 h后样品中二氧化钛晶粒有不同程度长大,其特征峰更加明显,且其中二氧化钛晶粒为锐钛矿型;乙酰乙酸乙酯的加入有利于溶胶-凝胶的形成,且随着乙酰乙酸乙酯加入量的增加,TiO2-C纳米复合材料的孔容和孔径均增加。     

溶剂比对Mn-ZnO复合纳米线形貌及吸附脱硫研究

采用水热法合成了Mn-ZnO复合纳米线,通过改变溶剂比来考察其对Mn-ZnO形貌的影响,并用等体积浸渍法负载金属Ni,制备反应吸附脱硫剂,以正庚烷/噻吩为模拟油并在固定床反应器装置上评价反应吸附脱硫性能.通过XRD、BET、SEM等方法对该催化剂进行表征;研究表明:溶剂比不同可导致Mn-ZnO复合物形貌的不同,从而影响脱硫性能.以乙醇溶液为溶剂制备的脱硫催化剂脱硫率可达99;左右,并且具有良好的稳定性.     

The Calibration Method of TOFr in the STAR Experiment

a tray of time of flight detector based on mrPc technology took part in the physics run of star both in p+p and d+au collisions in 2003. together with the information from the time Projection chamber(tPc) and the pseudo–vertex Position detector (pvPd) of the star experiment,corrections are done to calibrate the new prototype tof. the intrinsic time resolution of tofr reaches 85ps and it extends the π/K and K/p separation up to 1.6gev/c and 3.0gev/c respectively.     

Superposition of Coherent States in a Mesoscopic Josephson Junction with Dissipation

A mesoscopic Josephson junction with dissipation is considered. Usually the dissipation in the system is described as a consequence of its coupling to a reservoir. By solving the master equation we show that the state of the junction can evolve in a quantum superposition of two coherent states even when the dissipation is present.``     

Optical Properties of a New Two-photon Absorption Dye DEASPI

The two-photon absorption (TPA), TPA-induced frequency up-conversion emission, and two-photon pumped (TPP) frequency up-conversion lasing properties of a new synthesized dye Trans-4-［p-(N,N-diethylamino)styryl］-N-methylpyridinium iodide (DEASPI) were experimentally studied. This new dye has a moderate TPA cross-section of σ2=6.9×10-48 cm4*s/photon at 1064 nm, but exhibits a high lasing efficiency. The overall superradiant lasing conversion efficiency is as high as 10.7% at the pump energy of 2.14 mJ.     

Effect of Vacuum on the Laser-Induced Damage of Anti-Reflection Coatings

In the comparison of damage modifications, absorption measurement and energy dispersive x-ray analysis, the effect of vacuum on the laser-induced damage of anti-reflection coatings is analyzed. It is found that vacuum decreases the laser-induced damage threshold of the films. The low laser-induced damage threshold in vacuum environments as opposed to air environments is attributed to water absorption and the formation of the O/Si, O/Zr sub-stoichiometry in the course of laser irradiation.     

大口径石英基底衍射透镜的高精度制备方法

针对传统接触式曝光过程中掩模版因自身重力产生形变从而引入不可忽视的线宽误差和位置误差的问题,提出了一种大口径石英基底衍射透镜的高精度制备方法.采用背面具有真空道的高平面度、高强度金属校正工装吸附在掩模版上,利用掩模版上下表面的压强差使其与工装高度贴合,确保掩模版的高平面度.待石英基底所有区域均与掩模版结构面紧密贴合后取下工装.完成接触式曝光和显影后,采用反应离子刻蚀技术对大口径石英基底进行刻蚀,最终得到高精度微纳米结构.经有限元分析,使用该校正工装后,掩模版的形变量由28.85μm减小为0.88μm.实验结果表明,采用该方法制备的口径430mm两台阶石英基底菲涅尔衍射透镜波像差优于1/25λ,平均衍射效率为38.24%,达到理论值的94.35%,具有良好的聚焦和光学成像效果.