Molecular Weight Distribution in Living Polymerization Proceeding with Reshuffling of Polymer Segments due to Chain Transfer to Polymer with Chain Scission, 2. Monte Carlo Simulation of Polymer Reshuffling Proceeding with Disproportionation of Chain Functionalities

The method for analyzing the reshuffling of polymer segments developed previously has been extended to systems involving the disproportionation of chain functionalities. The effect of interchain exchange reactions of this type, leading to the redistribution of chain lengths and of the chain functionalities (redistribution of living and dead chain ends), was analyzed by means of the Monte Carlo simulations. In the systems, in which no propagation occurs (monomer concentration equal to zero), a set of polymer chains containing one living and one dead end was taken as an initial material. A series of simulations were performed for systems with differing molecular weight distributions of the starting macromolecules. Uniform (no chain length distribution polymer – all chains are of the same length), Poisson, and the most probable (geometric) distributions were taken into consideration. Although the molecular weight distributions (MWDs) of functionally different chains of the same polymer were different apart from the eventual equilibrium conditions, the overall MWD was very close to that observed in analogous systems without disproportionation. The same was observed concerning MWDs in modeled polymerization systems, in which reshuffling and disproportionation accompanied propagation. Consequently, a method of estimating the ratio of rate constants of propagation and reshuffling (i. e. k_p /k _tr) in the relevant polymerization systems, using the observed polydispersity indexes, was proposed. The extent of disproportionation can be evaluated from the determined relationships of the polydispersity index and of the monofunctional chains fraction as functions of the average number of chain transformations.     

Non-denaturating isoelectric focusing gel electrophoresis for uranium–protein complexes quantitative analysis with LA-ICP MS

A non-denaturating isoelectric focusing (ND-IEF) gel electrophoresis protocol has been developed to study and identify uranium (U)–protein complexes with laser ablation–inductively coupled plasma mass spectrometry (LA-ICP MS) and electrospray ionization mass spectrometry (ESI-MS). The ND-IEF-LA-ICP MS methodology set-up was initiated using in vitro U–protein complex standards (i.e., U–bovine serum albumin and U–transferrin) allowing the assessment of U recovery to 64.4?±?0.4 %. This methodology enabled the quantification of U–protein complexes at 9.03?±?0.23, 15.27?±?0.36, and 177.31?±?25.51 nmol U L^?1 in digestive gland cytosols of the crayfish, Procambarus clarkii, exposed respectively to 0, 0.12, and 2.5 μmol of waterborne depleted U L^?1 during 10 days. ND-IEF-LA-ICP MS limit of detection was 19.3 pmol U L^?1. Elemental ICP MS signals obtained both in ND-IEF electropherograms and in size exclusion chromatograms of in vivo U–protein complexes revealed interactions between U- and Fe- and Cu-proteins. Moreover, three proteins (hemocyanin, pseudohemocyanin-2, and arginine kinase) out of 42 were identified as potential uranium targets in waterborne-exposed crayfish cytosols by microbore reversed phase chromatography coupled to molecular mass spectrometry (µRPC-ESI-MS/MS) after ND-IEF separation.

Interferences in ultratrace speciation of organolead and organotin by gas chromatography with atomic spectrometric detection

Interferences in trace and ultratrace speciation analysis of organotin and organolead compounds in various samples by gas chromatography coupled with atomic absorption spectrometry (AAS) and/or microwave induced plasma atomic emission spectrometry (MIP AES) are investigated. Particular attention is given to the effects of matrix co-extractives and reagents impurities introduced during sample preparation. Their influence on the detection limits is discussed in terms of baseline noise level, blank value, formation of artefacts and signal suppression. Loss of column resolution during the analysis of some matrices is observed.     

Spontaneous and diastereoselective aldol reactions of cyclic β-amino ketones in the presence of water

Direct aldol reactions of 4-methyl-1-piperidone, tropinone and granatanone (pseudopelletierine) take place spontaneously in the presence of water without any catalyst or additional reagents. The anti/syn-diastereoselectivity of the aqueous aldol reaction depends on the amount of water used. The syn-selectivity of the reaction is probably due to the thermodynamic control. Excellent atom economy and low E factors together with anti-selectivity as high as 98:2 for the tropinone aldol were obtained.     

Comfortable, flexible upholstery fire barriers on base of bast, wool and thermostable fibres

The paper presents elastic barrier materials developed at the INF which play a role of filling and fire barrier material at the same time in upholstery furniture, reducing the development and spread of fire on flammable materials. The presented results of flammability and biophysical tests confirm the comfort of products.The developed barrier materials use natural fibres (wool, flax FR) characterized by good air permeability, hygroscopicity, moisture transport, elimination of electrostatic charges and have effect on climate of interiors also when blended with thermostable fibres such as Polyacrylate. These flexible structures based on blend of natural fibres and thermostable fibres with at least two barrier effects i.e. durable resistance to fire, thermal insulation, control of electrostatic phenomena.     

Influence of the soft segment length on the properties of water‐cured poly(carbonate‐urethane‐urea)s

Poly(carbonate‐urethane‐urea)s (PCUU) based on oligocarbonate diols (M_n ≈ 2000) with different length of the hydrocarbon chain as soft segments were synthesized and investigated. Carbonate oligomerols were obtained in a two‐step method from dimethyl carbonate (DMC) and linear α,ω‐diols (1,4‐butanediol, 1,5‐pentanediol, 1,6‐hexanediol, 1,9‐nonanediol, 1,10‐dekanediol and 1,12‐dodecanediol). Oligo(trimethylene carbonate) diol was synthesized using ring‐opening polymerization of trimethylence carbonate. PCUUs were obtained by prepolymer method using isophorone diisocyanate (IPDI) and water as a chain extender. Changes in polymers properties with increase of methylene group number between carbonate linkages were investigated by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), tensile strength and hardness measurements. The thermal stability was also analyzed by means of thermogravimetric analysis (TGA). Based on FTIR analysis influence of methylene groups number between carbonate linkages on phase separation and concentration of allophanate and biuret groups in the samples were investigated. The obtained poly(carbonate‐urethane‐urea)s exhibited very good mechanical properties. Tensile strength and elongation at break were 40 MPa and 400–600%, respectively, depending on the oligocarbonate used. Copyright © 2014 John Wiley & Sons, Ltd.     

Pressurized liquid extraction and anticholinesterase activity-based thin-layer chromatography with bioautography of Amaryllidaceae alkaloids

Modern extraction technique-pressurized liquid extraction (PLE) was optimised for extraction of lycorine and galanthamine (Amaryllidaceae alkaloids) from Narcissus jonquilla ‘Pipit’. Crude extracts were purified on Oasis MCX cartridges, and the alkaloids eluted with 80-100% recoveries using methanol-10% ammonia solution (3:1, v/v). Quantitative results were obtained by both HPTLC-densitometry on silica gel plates and RP-HPLC with diode array (DAD) on XTerra C₁₈ stationary phase. Both methods were fully validated in terms of specificity, precision (including intra- and inter-day measurements), LOD and LOQ values, correlation of UV spectra and linearity of calibration curves. The methods were also well correlated each other with correlation coefficients (r) 0.98823 and 0.99081, respectively, for the mean values of galanthamine and lycorine.Among the investigated solvents methanol and 1% tartaric acid methanolic solution at default conditions (120 °C, p = 60 bar, time: 10 min, one static cycle) permit the highest yields of the total sum of the alkaloids, whereas for toluene the lowest amounts were measured. Lycorine to galanthamine mean ratios were dependant on the type of solvent used, and in toluene galanthamine and related alkaloids were preferably extracted.In temperature experiments for galanthamine, the levels of this compound increased from the temperature of 20 till 150 °C in the investigated solvent systems, then decreased with slight increase from the temperature of 175 to 200 °C in 1% tartaric acid methanolic solution. When lycorine was analysed, similar trends were observed, however the maximum of the concentration was measured at a temperature about 125 °C. The ratios of the mean values of these two compounds differed in temperature-dependant experiments in both solvent systems.Further more, two TLC with bioautography approaches were used in screening for anticholinesterese properties of the extracts. No qualitative differences were found among the different solvent extracts, and AChE inhibition was correlated with galanthamine and related compounds.In conclusion, optimised PLE was much more effective than previously applied hot-solvent extraction, microwave-assisted extraction (MAE) or ultrasound-assisted extraction (USAE).     

On the Incorrectness of the Factor 2 in the Radical Termination Equation

The IUPAC recommended factor 2 preceding rate coefficients in the radical termination kinetic equations is claimed to be incorrect and confusing. This recommendation can lead to incorrect analysis of experimental data, especially while applying kinetic Monte Carlo simulations. The statement is based on the derivation of the corresponding relationships.

     

Mercury determination by CV-AAS in wastewater and sewage sludge from a stabilization pond system

The mercury concentrations in wastewater and sewage sludge of a stabilization pond system have been evaluated. The system is built by three parallel facultative ponds followed by two systems of three maturation ponds in series. The samples of wastewater and sludge were digested using nitric acid and placed into a Parr-type bomb for 4 h at 110° C. Mercury was measured by Cold Vapour Atomic Absorption Spectrometry (CV-AAS) at 253.7 nm with sodium tetrahydroborate as reductant. The methodologies were checked with an USEPA quality control sample, a standard reference material from NIST and with another method of mineralization (cold mineralization) showing good results. Concentrations of mercury in wastewater between 1.47 ± 0.75 gl^–1 have been found at the entrance of the system and 0.74 ± 0.0 gl^–1 at the exit, while in sludge the results were between 0.29 ± 0.12 gkg^–1 in the facultative pond and 0.04 ± 0.02 gkg^–1 in the second maturation pond (exit).