Rhodium(III)-catalyzed synthesis of isoquinolines from aryl ketone O-acyloxime derivatives and internal alkynes

A synthetic method of isoquinolines from aryl ketone O-acyloxime derivatives and internal alkynes has been developed using [Cp*RhCl(2)](2)-NaOAc as the potential catalyst system. The present transformation is carried out by a redox-neutral sequence of C-H vinylation via ortho-rhodation and C-N bond formation of the putative vinyl rhodium intermediate on the oxime nitrogen, where the N-O bond of oxime derivatives could work as an internal oxidant to maintain the catalytic cycle.     

Preparation and certification of arsenate [As(V)] reference material, NMIJ CRM 7912-a

Arsenate [As(V)] solution reference material, National Metrology Institute of Japan (NMIJ) certified reference material (CRM) 7912-a, for speciation of arsenic species was developed and certified by NMIJ, the National Institute of Advanced Industrial Science and Technology. High-purity As₂O₃ reagent powder was dissolved in 0.8 M HNO₃ solution and As(III) was oxidized to As(V) with HNO₃ to prepare 100 mg kg^-1 of As(V) candidate CRM solution. The solution was bottled in 400 bottles (50 mL each). The concentration of As(V) was determined by four independent analytical techniques—inductively coupled plasma mass spectrometry, inductively coupled plasma optical emission spectrometry, graphite furnace atomic absorption spectrometry, and liquid chromatography inductively coupled plasma mass spectrometry—according to As(V) calibration solutions, which were prepared from the arsenic standard of the Japan Calibration Service system and whose species was guaranteed to be As(V) by NMIJ. The uncertainties of all the measurements and preparation procedures were evaluated. The certified value of As(V) in the CRM is (99.53 ± 1.67) mg kg^-1 (k = 2).     

Mechanism of the decrease in catalytic activity of human cytochrome P450 2C9 polymorphic variants investigated by computational analysis

Cytochrome P450 (CYP) is deeply involved in the metabolism of chemicals including pharmaceuticals. Therefore, polymorphisms of this enzyme have been widely studied to avoid unfavorable side effects of drugs in chemotherapy. In this work, we performed computational analysis of the mechanism of the decrease in enzymatic activity for three typical polymorphisms in CYP 2C9 species: *2, *3, and *5. Based on the equilibrated structure obtained by molecular dynamics simulation, the volume of the binding pocket and the fluctuation of amino residues responsible for substrate holding were compared between the wild type and the three variants. Further docking simulation was carried out to evaluate the appropriateness of the binding pocket to accommodate substrate chemicals. Every polymorphic variant was suggested to be inferior to the wild type in enzymatic ability from the structural viewpoint. F‐G helices were obviously displaced outward in CYP2C9*2. Expansion of the binding pocket, especially the space near F′ helix, was remarkable in CYP2C9*3. Disappearance of the hydrogen bond between K helix and β4 loop was observed in CYP2C9*5. The reduction of catalytic activity of those variants can be explained from the deformation of the binding pocket and the consequent change in binding mode of substrate chemicals. The computational approach is effective for predicting the enzymatic activity of polymorphic variants of CYP. This prediction will be helpful for advanced drug design because calculations forecast unexpected change in drug efficacy for individuals. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

System size and energy dependence of jet-induced hadron pair correlation shapes in Cu+Cu and Au+Au collisions at square root sNN=200 and 62.4 GeV

We present azimuthal angle correlations of intermediate transverse momentum (1-4 GeV/c) hadrons from dijets in Cu+Cu and Au+Au collisions at square root sNN=62.4 and 200 GeV. The away-side dijet induced azimuthal correlation is broadened, non-Gaussian, and peaked away from Delta phi=pi in central and semicentral collisions in all the systems. The broadening and peak location are found to depend upon the number of participants in the collision, but not on the collision energy or beam nuclei. These results are consistent with sound or shock wave models, but pose challenges to Cherenkov gluon radiation models.     

PhI(OAc)2-mediated iminobromination for synthesis of bromomethyl cyclic imines starting from alkenyl carbonitriles and Grignard reagents

PhI(OAc)₂-mediated iminobromination was developed starting from alkenyl carbonitriles and Grignard reagents. The present transformation is carried out by a sequence of nucleophilic addition of Grignard reagents to alkenyl carbonitriles to form N-H imines and their iminohalogenation by subsequent treatment with PhI(OAc)₂.     

Mass balance method for purity assay of phthalic acid esters: development of primary reference materials as traceability sources in the Japan Calibration Service System

Purity assay of high-purity materials (HPMs) of phthalic acid esters (PAEs) was carried out by means of a mass balance method. In this method, chromatographic methods such as gas chromatography-flame ionization detector (GC-FID) and/or high-performance liquid chromatography (HPLC) in combination with other methods such as Karl-Fischer (KF) titration and vacuum evaporation (VE) were applied. The sum of the impurities estimated by these methods allowed the estimation of the purity of the main component by difference. Seven PAEs with varying side chain structures and levels of impurities were analysed on a systematic way in which impurities were classified into several groups in terms of their abundance, availability of qualitative information and availability of authentic compounds, etc. The absolute quantity of each impurity was determined by GC-FID and/or HPLC based on the calibration made by the authentic compounds of impurities whenever available. The purities in mass fraction of these PAEs were certified at the National Metrology Institute of Japan (NMIJ), and the PAEs were registered as primary reference materials playing an essential role in linking the metrological traceability of the Japan Calibration Service System (JCSS) to the International System of Units (SI).     

Copper-catalyzed benzylic C-H oxygenation under an oxygen atmosphere via N-H imines as an intramolecular directing group

Copper-catalyzed benzylic C-H oxygenation under an oxygen atmosphere was developed starting from carbonitriles and Grignard reagents via N-H imine intermediates. The present process is characterized by the following two-step sequence in a one-pot manner: (1) addition of Grignard reagents to carbonitriles to form N-H imines and (2) benzylic C-H oxygenation (C═O bond formation) triggered by 1,5-hydrogen atom transfer with transient iminyl copper species.     

Halichonines A, B, and C, novel sesquiterpene alkaloids from the marine sponge Halichondria okadai Kadota

Novel sesquiterpene alkaloids, halichonines A (1), B (2), and C (3), were identified from the marine sponge Halichondria okadai Kadota. By spectroscopic analyses and synthesis, their structures were revealed to include a 6,6-bicyclic ring system and two prenylated amine moieties. In addition, 2 induced apoptosis in HL60 human leukemia cells.     

Crystal plasticity analysis of texture development in magnesium alloy during extrusion

The texture development mechanism during the extrusion of magnesium alloy is investigated by experimental observation and numerical analysis. First, we perform a finite element analysis of a full extrusion process using a phenomenological constitutive equation, and it is confirmed that the loading condition of the extrusion process near the central axis of the billet is approximated by an equi-biaxial compression mode. Then, the equi-biaxial compression problem is adopted as a simplified boundary value problem to be solved using a crystal plasticity model to clarify the detailed texture development mechanism during the extrusion process. The crystal plasticity analysis of equi-biaxial compression successfully reproduces the texture development from an initial random texture to the final experimentally observed texture. The effects of the deformation modes (i.e. slip and twinning systems) implemented in the calculation and the reference stress ratio of basal to nonbasal slip systems on texture development are studied in detail. Finally, the mechanism of texture development during the extrusion process is discussed in terms of the lattice rotation caused by the activated slip systems.     

Experimental study on vibrations of a nonwoven fabric cylindrical filter

Unexpected vibrations on a cylindrical filter made of nonwoven fabrics were clarified experimentally. Two types of filter with length L=1.8 m and 3.7 m, both 45 cm in diameter and 1.08 mm in thickness, were used. This is a new type of aeroelastic vibration phenomenon because the filter is a closed cylindrical vessel. In addition, the flow velocity of inner air was very slow and inner air flowed out slowly from the filter surface. The velocity distribution of air flow from a fan duct as well as the frequency and amplitude of the filter vibration were measured for two types of filter. By setting up a roll core panel at the outlet of the fan duct, we could rectify the outflow and suppressed the vibration of the shorter filter with L=1.8 m. However, this method was not adequate for the longer filter with L=3.7 m, and we could suppress the vibration by shielding the inner surface of the filter at the top region.