Electronic Transitions in Conformationally Controlled Peralkylated Hexasilanes

The photophysical properties of oligosilanes show unique conformational dependence due to σ‐electron delocalization. The excited states of the SAS, AAS, and AEA conformations of peralkylated n‐hexasilanes, in which the SiSiSiSi dihedral angles are controlled into a syn (S), anti (A), or eclipsed (E) conformation, were investigated by using UV absorption, magnetic circular dichroism (MCD), and linear dichroism spectroscopy. Simultaneous Gaussian fitting of all three spectra identified a minimal set of transitions and the wavenumbers, oscillator strengths, and MCD B terms in all three compounds. The results compare well with those obtained by using the symmetry‐adapted‐cluster configuration interaction method and almost as well with those obtained by time‐dependent density functional theory with the PBE0 functional. The conformational dependence of the transition energies and other properties of free‐chain permethylated n‐hexasilane, n‐Si₆Me₁₄, was also examined as a function of dihedral angles, and the striking effects found were attributed to avoided crossings between configurations of σσ* and σπ* character.     

A study of comparability in amplified fragment length polymorphism profiling using a simple model system

A simple amplified fragment length polymorphism (AFLP) model, using the bacteriophage lambda genome, was developed to test the reproducibility of this technique in an international comparative study. Using either non-selective or selective primers, nine fragments or subsets of two or three fragments, respectively, were predicted using in silico software. Under optimized conditions, all predicted fragments were experimentally generated. The reproducibility of the AFLP model was tested by submitting both "unknown" DNA template that had been restricted and ligated with AFLP linkers (R/L mixture) and corresponding primer pairs to nine laboratories participating in the study. Participants completed the final PCR step and then used either slab gel electrophoresis or CE to detect the AFLP fragments. The predicted fragments were identified by the majority of participants with size estimates consistently up to 3 base pair (bp) larger for slab gel electrophoresis than for CE. Shadow fragments, 3 bp larger than the predicted fragments, were often observed by study participants and organizers. The nine AFLP fragments exhibited relative intensities ranging from less than 3% to 22% and, apart from the two weakest fragments, with a % CV of 16 to 25. Fragments containing the highest guanine-cytosine (GC) content of 50-56% showed the greatest stability in the AFLP profiles.     

Determination of cadmium in grains by isotope dilution ICP–MS and coprecipitation using sample constituents as carrier precipitants

A coprecipitation method using sample constituents as carrier precipitants was developed that can remove molybdenum, which interferes with the determination of cadmium in grain samples via isotope dilution inductively coupled plasma mass spectrometry (ID-ICPMS). Samples were digested with HNO₃, HF, and HClO₄, and then purified 6 M sodium hydroxide solution was added to generate colloidal hydrolysis compounds, mainly magnesium hydroxide. Cadmium can be effectively separated from molybdenum because the cadmium forms hydroxides and adsorbs onto and/or is occluded in the colloid, while the molybdenum does not form hydroxides or adsorb onto the hydrolysis colloid. The colloid was separated by centrifugation and then dissolved with 0.2 M HNO₃ solution to recover the cadmium. The recovery of Cd achieved using the coprecipitation was >97%, and the removal efficiency of Mo was approximately 99.9%. An extremely low procedural blank (below the detection limit of ICPMS) was achieved by purifying the 6 M sodium hydroxide solution via Mg coprecipitation using Mg(NO₃)₂ solution. The proposed method was applied to two certified reference materials (NIST SRM 1567a wheat flour and SRM 1568a rice flour) and CCQM-P64 soybean powder. Good analytical results with small uncertainties were obtained for all samples. This method is simple and reliable for the determination of Cd in grain samples by ID-ICPMS. Figure Overview of a coprecipitation method using sample constituents     

Preparation of rapidly disintegrating tablets containing itraconazole solid dispersions

The disintegratability of tablets prepared from two types of solid dispersions containing the water-soluble polymer TC-5 and the enteric polymer HP-55 as an excipient were compared. The disintegratability was better in the tablets of solid dispersions containing non-water-soluble HP-55 than those containing TC-5. In consideration of the dissolubility of solid dispersions containing HP-55, the mean diameter of the solid dispersion (coating powder) must be controlled to 120 microm or less, but as this markedly increases the adhesion/aggregation tendency of the particles (angle of repose: 47 degrees ), control of the adhesion/aggregation tendency emerged as another problem. Therefore, surface-modification was performed in a high-speed agitating granulator using 0.1% light anhydrous silicic acid as a surface modifier, and marked improvement in the flowability was observed. This made continuous tableting using a rotary tablet machine possible even with the poorly flowable solid dispersions. Also, in tableting of the solid dispersions, no recrystallization of amorphous itraconazole by the tableting pressure was observed, and the tablets maintained satisfactory dissolubility. Moreover, it was possible to obtain the rapidly disintegrating tablets with very satisfactory properties, i.e., a tablet hardness of 30 N or higher and a disintegration time of 30 s or less, by the addition of croscarmellose as a disintegrant at 2% to the surface-modified solid dispersion and selection of the tableting pressure at 4.5 kN.     

Structure of the electrical double layer on the aqueous solution side of the polarized interface between water and a room-temperature ionic liquid, tetrahexylammonium bis(trifluoromethylsulfonyl)imide

The structure of the electrical double layer on the aqueous solution side has been studied by measuring electrocapillary curves at the polarized interface between a room-temperature ionic liquid (RTIL), tetrahexylammonium bis(trifluoromethylsulfonyl)imide, and water (W) at different concentrations of LiCl. Thermodynamic analysis of the electrocapillary curves indicates that Li+ ions negatively adsorb at the point of zero charge. The adsorption of Li+ and Cl- ions in the polarized potential window of about 200 mV can be explained by the Gouy's double layer model, and the specific adsorption of Li+ and Cl- ions at the RTIL|W interface is negligible within the polarized potential window.     

Phosphatidylcholine vesicle-mediated decomposition of hydrogen peroxide

The decomposition of hydrogen peroxide (H2O2) was examined in aqueous solution (50 mM Tris-HCl buffer, pH 7.4, containing 100 mM NaCl) at 25 degrees C in pure buffer or in the presence of either vesicles or micelles formed from various phosphatidylcholines (PCs). In the absence of PCs, more than 90% of the initially added H2O2 (1.0 mM) remained intact after incubation for 120 h. The effect of the PCs on the decomposition of H2O2 was studied by using different PCs that varied in terms of number of carbon atoms in the two acyl chains n as well as in terms of the degree of unsaturation. PCs with short hydrocarbon chains (n = 4, 6-8) were dissolved in the buffer solution in the form of nonassociated monomers or as micelles in equilibrium with monomers at a fixed PC concentration of 10 mM. The presence of these short-chain PCs slightly enhanced the H2O2 decomposition rate. Micelles formed by non-lipid detergents (sodium cholate, Triton X-100, and sodium dodecylsulfate) had a similar effect. In marked contrast, PCs with long hydrocarbon chains (n > or = 10) dispersed in buffer solution as vesicles (liposomes) significantly enhanced the rate of H2O2 decomposition, with the most effective PC being 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) at 25 degrees C. This indicates that the packing density of the PC molecules influences the reactivity, presumably through the direct interaction of the PC assemblies with H2O2 molecules. Furthermore, in the case of vesicles formed from PCs with unsaturated acyl chains (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, POPC; 1,2-dioleoyl-sn-glycero-3-phosphocholine, DOPC), carbon-carbon double bond oxidation did not occur extensively under the conditions used. This indicates that the observed effect of PCs on the decomposition of H2O2 is indeed related to the assembly structure (vesicle vs micelles vs monomers) and is clearly not related to the presence of unsaturated hydrocarbon chains. Fluorescence polarization measurements of two fluorescent probes embedded either in the acyl chain region of the vesicles (DPH, 1,6-diphenyl-1,3,5-hexatriene) or on the surface of the vesicles (TMA-DPH, 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene iodide) show that the presence of H2O2 leads to a decrease in the fluidity of the lipid-water surface and not to a change in the fluidity of the hydrophobic region of the vesicle bilayer. This indicates that the decomposition of H2O2 is triggered through interactions between H2O2 and the polar head group area of PC vesicles.     

Mechanical and dielectric studies of carrageenan sols and gels

The temperature dependence of the dynamic shear modulus, strain optical coefficient, DC conductivity, and complex dielectric spectrum of κ- and ι-carrageenan aqueous solutions with K, Ca, Cs, and Na were measured in order to clarify the formation process of the cross-linking region and the gel network structure. From the correlation analysis between the shear modulus and the strain optical coefficient, we found that the stress inducing unit orientation increases with decreasing temperature, which strongly suggests that the branching number in a cross-linking region increases with decreasing temperature, which depends on counterion species. In terms of the correlation parameters, an increasing scheme of the branching number depends on counterion species. Just below the coil-helix transition temperature, dielectric relaxation arises, with relaxation time ∼100μs and relaxation strength ∼10³. Dielectric relaxation can be assigned to the counterion fluctuation in the parallel direction to the helical axis. The fluctuation distance of the counterion estimated from the relaxation time increases sharply in the initial stage of gelation and gradually reaches a constant value. We concluded that the longitudinal length of the aggregated region increases sharply at the initial state of gelation while the number of helical molecules bundled in a cross-linking region increases successively with decreasing temperature.     

Relativistic effects and the halogen dependencies in the 13C chemical shifts of CH4−nIn,CH4−nBrn,CCl4−nIn,and CBr4−nIn (n=0–4)

Linear and nonlinear halogen dependencies of the ¹³C magnetic shielding constants of CH_4−nI_n, CH_4−nBr_n, CCl_4−nI_n, and CBr_4−nI_n were fairly reproduced by the ab initio generalized unrestricted Hartree–Fock (GUHF)/finite perturbation (FP) method including spin‐orbit (SO) interaction and spin‐free relativistic (SFR) terms. As seen from the experimental trends, the calculated ¹³C chemical shifts in CCl_4−nI_n and CBr_4−nI_n depend linearly on n=0–4, while those in CH_4−nI_n and CH_4−nBr_n depend nonlinearly. We found that both the linear and nonlinear dependencies are due to the relativistic effects, and especially due to the Fermi–Contact (FC) term originating from the SO interaction. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 528–536, 2001     

Iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides for synthesis of α-tertiary amines

A protocol for the synthesis of α-tertiary amines was developed by iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides. Nucleophilic 1,2-addition of organolithium reagents to carboxamides forms anionic tetrahedral carbinolamine (hemiaminal) intermediates, which are subsequently treated with bromotrimethylsilane (Me₃SiBr) followed by organomagnesium (Grignard) reagents, organolithium reagents or tetrabutylammonium cyanide, affording α-tertiary amines. Employment of (trimethylsilyl)methylmagnesium bromide as the 2^nd nucleophile allowed for aza-Peterson olefination of the resulting α-tertiary (trimethylsilyl)methylamines with acidic work-up, resulting in the formation of 1,1-diarylethylenes.

We herein report a concise protocol for iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides for the synthesis of α-tertiary amines.     

p-Nitrophenol permeability and temperature characteristics of an acryloyl-L-proline methyl ester-based porous gel membrane

Thermoresponsive porous gel membranes were synthesized by a simultaneously occurring process consisting of radiation-induced polymerization and crosslinking in aqueous solutions at various concentrations of acryloyl-L -proline methyl ester(A-ProOMe) without a crosslinker. Permeation of p-nitrophenol (PNP) through a thermoresponsive porous gel membrane obtained at a monomer concentration of 80% (w/w) drastically reduced around 14°C, the lower critical solution temperature (LCST) of linear poly(A-ProOMe) in water, from 0.60 × 10⁻³ cm/min at 10°C to no permeation at 18°C, accompanied by changes in both size and shape of pores associated with gel shrinkage. Moreover, it was found that porous gel membranes with a porosity of approximately 60% had a greater PNP permeability constant through porous gel membranes with mutually connected pores obtained at a monomer concentration of 50% (w/w) than individually supported pores obtained at a monomer concentration of 70% (w/w). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1495–1500, 1998