Thermal effects on energetics and dynamics in water cluster anions (H2O)n(-)

The electron binding energies and relaxation dynamics of water cluster anions (H(2)O)(n)(-) (11 ≤ n ≤ 80) formed in co-expansions with neon were investigated using one-photon and time-resolved photoelectron imaging. Unlike previous experiments with argon, water cluster anions exhibit only one isomer class, the tightly bound isomer I with approximately the same binding energy as clusters formed in argon. This result, along with a decrease in the internal conversion lifetime of excited (H(2)O)(n)(-) (25 ≤ n ≤ 40), indicates that clusters are vibrationally warmer when formed in neon. Over the ranges studied, the vertical detachment energies and lifetimes appear to converge to previously reported values.     

Size controlled growth of germanium nanorods and nanowires by solution pyrolysis directly on a substrate

Herein, we describe the controlled growth of 1 dimensional germanium nanostructures from high aspect ratio nanowires (>10 microns in length) to shorter aspect nanorods (100 nm in length) via a simple pyrolysis method. The synthetic route involves the thermal decomposition of selected germanium precursors by dropping a solution in a high boiling point solvent directly onto a pre-heated Si wafer in the presence of a copper source under inert conditions.     

Unraveling the mechanism of catalytic reduction of O2 by microperoxidase-11 adsorbed within a transparent 3D-nanoporous ITO film

Nanoporous films of indium tin oxide (ITO), with thicknesses ranging from 250 nm to 2 μm, were prepared by Glancing Angle Deposition (GLAD) and used as highly sensitive transparent 3D-electrodes for quantitatively interrogating, by time-resolved spectroelectrochemistry, the reactivity of microperoxidase-11 (MP-11) adsorbed within such films. The capacitive current densities of these 3D-electrodes as well as the amount of adsorbed MP-11 were shown to be linearly correlated to the GLAD ITO film thickness, indicating a homogeneous distribution of MP-11 across the film as well as homogeneous film porosity. Under saturating adsorption conditions, MP-11 film concentration as high as 60 mM was reached. This is equivalent to a stack of 110 monolayers of MP-11 per micrometer film thickness. This high MP-11 film loading combined with the excellent ITO film conductivity has allowed the simultaneous characterization of the heterogeneous one-electron transfer dynamics of the MP-11 Fe(III)/Fe(II) redox couple by cyclic voltammetry and cyclic voltabsorptometry, up to a scan rate of few volts per second with a satisfactory single-scan signal-to-noise ratio. The potency of the method to unravel complex redox coupled chemical reactions was also demonstrated with the catalytic reduction of oxygen by MP-11. In the presence of O(2), cross-correlation of electrochemical and spectroscopic data has allowed us to determine the key kinetics and thermodynamics parameters of the redox catalysis that otherwise could not be easily extracted using conventional protein film voltammetry. On the basis of numerical simulations of cyclic voltammograms and voltabsorptograms and within the framework of different plausible catalytic reaction schemes including appropriate approximations, it was shown possible to discriminate between different possible catalytic pathways and to identify the relevant catalytic cycle. In addition, from the best fits of simulations to the experimental voltammograms and voltabsorptograms, the partition coefficient of O(2) for the ITO film as well as the values of two kinetic rate constants could be extracted. It was finally concluded that the catalytic reduction of O(2) by MP-11 adsorbed within nanoporous ITO films occurs via a 2-electron mechanism with the formation of an intermediate Fe(III)-OOH adduct characterized by a decay rate of 11 s(-1). The spectroelectroanalytical strategy presented here opens new opportunities for characterizing complex redox-coupled chemical reactions not only with redox proteins, but also with redox biomimetic systems and catalysts. It might also be of great interest for the development and optimization of new spectroelectrochemical sensors and biosensors, or eventually new photoelectrocatalytic systems or biofuel cells.     

Copper‐Mediated Deoxygenative Trifluoromethylation of Benzylic Xanthates: Generation of a C?CF3 Bond from an O‐Based Electrophile

The conversion of an alcohol‐based functional group, into a trifluoromethyl analogue is a desirable transformation. However, few methods are capable of converting O‐based electrophiles into trifluoromethanes. The copper‐mediated trifluoromethylation of benzylic xanthates using Umemoto’s reagent as the source of CF₃ to form C? CF₃ bonds is described. The method is compatible with an array of benzylic xanthates bearing useful functional groups. A preliminary mechanistic investigation suggests that the C? CF₃ bond forms by reaction of the substrate with in situ generated CuCF₃ and CuOTf. Further evidence suggests that the reaction could proceed via a radical cation intermediate.     

Fluorinated polymerizable phosphonium salts from PH3: Surface properties of photopolymerized films

An array of highly fluorinated polymerizable phosphonium salts (HFPPS) were synthesized from PH₃ and utilized in UV‐curable formulations. Inclusion of these salts at very low loading (0.1–1 wt %) into hexanediol diacrylate (HDDA) resulted in hydrophobic surfaces. The water repellency was achieved with short C₄F₉ fluorocarbon appendages in the monomer as opposed to the bioaccumulative C₈F₁₇ appended polymers. The physical properties of these new monomers were also characterized. The molecular architecture of the monomers had a pronounced effect on both their physical properties along with the degree of hydrophobicity imparted in the polymer. Salts utilizing the bis(trifluoromethylsulfonyl)imide anion displayed excellent compatibility with HDDA, while the chloride salts were insoluble. Time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) confirmed the presence of the HFPPS at the surface of the polymer coating. For the first time this demonstrates how these salts may be used to functionalize the surface of a UV‐cured film with ionic species. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2782–2792     

Amidrazones 9. Convenient Syntheses of 1-Alkyl-1-Phenylhydrazines and α,β-Unsaturated Amidrazones Via Base-Promoted Reactions of 1,1-Disubstituted-3-Amino-4,5-Dihydro-1H-Pyrazolium Salts

A simple, efficient procedure for the conversion of phenylhydrazine to 1-alkyl-1-phenylhydrazines via base-promoted hydrolysis of 1-alkyl-3-amino-4,5-dihydro-1-phenyl-1H-pyrazolium iodides (2) is described. N¹, N¹-disubstituted hydrazones of trans-cinnamamide and acrylamide are obtained by Hofmann-type ring openings of 1,1 -disubstituted-3-amino-4,5-dihydro-5-phenyl (or 5-unsubstituted) -1H-pyrazolium halides (5, 7).     

Determination of palladium in different samples by neutron activation after selective preconcentration with α-benzildioxime

A procedure is described for the determination of submicrogram quantities of palladium in sea water, biological and geological materials. Palladium is preconcentrated by coprecipitation with α-benzildioxime at pH 2 in the presence of citric acid followed by neutron activation. The method is highly selective and only traces of other metals are adsorbed on the surface of the precipitate. The instrumental variant of counting of long-lived ¹⁰⁹Pd (t$\text{1}\text{2}$ = 13.6 h) after 16-h irradiation gives a detection limit of 10 ng. A further decrease of the detection limit to 1 ng can be attained by removal of radioactive impurities (mainly ²⁴Na, ⁵⁶Mn and ⁸²Br) after washing the dichloromethane extract of dissolved precipitate with an aqueous solution of citric acid containing inactive carriers of bromide, manganese and sodium ions. Palladium (¹⁰⁹Pd) is finally measured by a NaI(Tl) well type scintillation detector. The method can be applied to most environmental samples.     

Mechanisms of TiO2 nanoparticle transport in porous media: role of solution chemistry, nanoparticle concentration, and flowrate

The controlled self-assembly of multi-components in one system represents the capability integrating intermolecular interactions and functions of components and is believed the key procedure leading to multifunctional materials finally. In pursuing this goal, we used a double-chain cationic surfactant with a benzoic acid group at the end of one tail to encapsulate Keggin-type polyanion clusters via electrostatic interaction, obtaining uniform supramolecular hybrid reverse micelles, which served as hydrogen-bonding donors. Five pyridine derivatives containing conjugated and non-conjugated groups were chosen as hydrogen-bonding acceptors to bind with reverse micelles. Through mixing with these components according to chemical stoichiometry, the hybrid reverse micelle changed to a new self-assembly precursor through intermolecular hydrogen bonding. The as-prepared reverse micelles bearing conjugated pyridine groups exhibit supramolecular liquid crystal properties, which were characterized by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. The length and number of the alky chain in the pyridine derivatives, as well as the charges of polyoxometalates were also studied with regard to the liquid crystal structure. The synergistic effect of among three components was analyzed, and the liquid crystal properties could be conveniently adjusted through the modification of the hydrogen-bonding acceptor components.