多吡啶类双核镍配合物的合成、晶体结构及抗癌活性

合成了2个相似的多吡啶类双核镍配合物[Ni_2(L)_2Cl_2](ClO_4)_2·3H_2O (1)和[Ni_2(L)_2Cl_2](PF_6)_2 (2)(L=N,N-bis(pyridin-2-ylmethyl)-4-(4-((pyridin-2-ylmethyl)amino)benzyl)aniline),通过X射线单晶衍射对其结构进行测定并解析,并利用元素分析、红外光谱对其进行表征。另外,通过噻唑蓝(MTT)比色法检验了 2个配合物对HeLa细胞、BGC-823细胞、NCI-H460细胞以及HepG-2细胞的体外毒性作用,结果表明2个配合物均对NCI-H460细胞表现出良好的毒性作用,IC_(50)值分别为(26.0±2.2)μmol·L~(-1)(1)和(31.3±2.7) μmol·L-~1 (2)。进一步通过Hoechst 33342染色、活性氧水平检测、线粒体膜电位的测定和分析探究了配合物1的抗肿瘤作用机制,结果表明,该配合物可能通过线粒体途径来诱导细胞凋亡从而对癌细胞产生致死作用。     

关于开设内光电效应实验的探索与思考

介绍了开设以内光电效应为理论基础的半导体光电器件的重要性和迫切性,并详细介绍了内光电效应的理论与半导体光电器件的分类和应用前景。     

基于瑞利-索末菲积分的大衍射角衍射光学元件设计方法

针对现有的衍射光学元件设计方法只适用于小角度衍射的情况,本文提出了一种基于瑞利-索末菲衍射积分的设计方法,可以用来设计具有大衍射角的衍射光学元件。先对目标光场进行坐标变换和强度调整,再利用改进的Gerchberg-Saxton算法优化得到衍射光学元件的相位分布。分别采用本文方法和原有的基于夫琅禾费衍射积分的方法设计衍射光学元件实现线条结构光和不同角度方框图形的光场重构,结果表明:原有的设计方法只适用于衍射角全角小于25°的情况,当衍射角大于25°时,重构光场会出现显著的枕形畸变和不均匀的强度分布。而本文方法在小角度和大角度衍射下都能重构出准确的衍射角和较为均匀的强度分布.     

编码器动态检测系统高实时性高精度角度基准设计

在编码器动态特性检测中,角度基准的快速反应和精度直接影响着动态特性检测装置的准确性。为实现角度基准的快速响应,提高基准编码器的测角精度,本文设计了高精度快速细分角度基准编码器。首先,通过对目前角度基准不足对编码器动态特性检测影响的分析,得出动态检测精度主要受基准编码器的数据处理延时影响。其次,通过对基准编码器结构、细分电路、处理电路等的设计,完成了23位高实时性角度基准编码器的制作。最后,为提高检测精度,利用RBF神经网络对角度基准进行误差补偿。所设计的角度基准编码器分辨率达到0.15",并且可以在10 r/s速度时,保证逐分辨率输出。经过测量,补偿前基准编码器的精度为1.30",补偿后的基准编码器误差峰峰值不超过2.5",精度优于0.6"。高精度、高实时性角度基准编码器的研制,提高了编码器动态特性检测系统的检测精度,为研究编码器动态特性提供了基础。     

天文/卫星组合点校捷联惯性导航系统算法研究

捷联式惯性导航系统通常采用卫星导航系统的位置、速度信息对惯导解算误差进行校正,但对于水下载体惯性导航系统而言,由于只能获得点位置信息,对惯导的校正精度以及校正参量有限。针对上述问题,提出了基于天文/卫星组合校正捷联式惯导技术,通过卫星精确定位信息和天文快速观测信息,全面修正惯导系统误差、提高导航精度。仿真结果表明,基于天文/卫星组合校正算法对惯导进行校正,相对于传统校正算法精度可提高约50%。     

Pyrolysis of Hailar lignite in an autogenerated steam agent

An in situ pyrolysis process of high moisture content lignite in an autogenerated steam agent was proposed. The aim is to utilize steam autogenerated from lignite moisture as a reactant to produce fuel gas and additional hydrogen. Thermogravimetric analysis revealed that mass loss and maximum mass loss rate increased with the rise of heating rates. The in situ pyrolysis process was performed in a screw kiln reactor to investigate the effects of moisture content and reactor temperature on product yields, gas compositions, and pyrolysis performance. The results demonstrated that inherent moisture in lignite had a significant influence on the product yield. The pyrolysis of L _R (raw lignite with a moisture content of 36.9 %, wet basis) at 900 °C exhibited higher dry yield of 33.67 mL g^?1 and H₂ content of 50.3 vol% than those from the pyrolysis of the predried lignite. It was also shown that increasing reaction temperature led to a rising dry gas yield and H₂ yield. The pyrolysis of L _R showed the maximum dry yield of 33.7 mL g^?1 and H₂ content of 53.2 vol% at 1,000 °C. The LHV of fuel gas ranged from 18.45 to 14.38 MJ Nm^?3 when the reactor temperature increased from 600 to 1,000 °C.     

Toehold‐initiated Rolling Circle Amplification for Visualizing Individual MicroRNAs In Situ in Single Cells

The ability to quantitate and visualize microRNAs (miRNAs) in situ in single cells would greatly facilitate the elucidation of miRNA‐mediated regulatory circuits and their disease associations. A toehold‐initiated strand‐displacement process was used to initiate rolling circle amplification of specific miRNAs, an approach that achieves both stringent recognition and in situ amplification of the target miRNA. This assay, termed toehold‐initiated rolling circle amplification (TIRCA), can be utilized to identify miRNAs at physiological temperature with high specificity and to visualize individual miRNAs in situ in single cells within 3 h. TIRCA is a competitive candidate technique for in situ miRNA imaging and may help us to understand the role of miRNAs in cellular processes and human diseases in more detail.     

Calcite Microneedle Arrays Produced by Inorganic Ion‐Assisted Anisotropic Dissolution of Bulk Calcite Crystal

Besides studies on the mineralization process, research on the demineralization of minerals provides another way to understand the crystallization mechanism of biominerals and fabricate crystals with complicated morphologies. The formation of ordered arrays of c‐axis‐oriented calcite microneedles with a tri‐symmetric structure and lengths of more than 20 μm was realized on a large scale for the first time through anisotropic dissolution of calcite substrates in undersaturated aqueous solution in the presence of ammonium salts. The lengths and the aspect ratios of the calcite microneedles can be tuned by simply changing the concentrations of the ammonium salts and the dissolution time. The shape of the transverse cross sections of the calcite microneedles obtained in the presence of NH₄Cl and NH₄Ac is almost regularly triangular. The tri‐symmetric transverse cross‐section geometry of the calcite microneedles could be attributed to the tri‐symmetric feature of rhombohedral calcite atomic structures, the synergetic interactions between electrostatic interaction of ammonium ions and dangling surface carbonate groups, and the ion incorporation of halide ions.     

甲氨蝶呤的电化学测定及与溶菌酶相互作用的研究

研究甲氨蝶呤(MTX)在石墨烯修饰玻碳电极上的电化学行为,探讨MTX与溶菌酶(LYSO)的相互作用及其作用机理。结果发现,在pH 4.5的HAc-NaAc缓冲溶液中,石墨烯修饰电极对MTX的电化学氧化具有明显的催化作用,氧化峰电流相对于在裸玻碳电极上增加了5倍。线性范围为0.05~3.0μmol/L,检出限(S/N=3)为0.02μmol/L。对0.8μmol/L的MTX11次平行测定,RSD为3.5%。当LYSO加入MTX溶液后,其峰电流降低。紫外光谱有红移增色效应。MTX与LYSO结合比为1∶1,结合常数为4.9×105L/mol。方法可用于MTX片药物的检测及与蛋白相互作用的研究。     

ZnO掺杂的SnO_2纳米纤维的制备、表征及气敏机理(英文)

以二水氯化亚锡(SnCl2·2H2O)为盐原料,采用静电纺丝的方法制备了SnO2纳米纤维.为了研究ZnO掺杂对SnO2形貌、结构及化学成分的影响,分别制备了不同含量ZnO掺杂的SnO2/ZnO复合材料.利用热重-差热分析(TG-DTA)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱仪、扫描电镜(SEM)及能量色散X射线(EDX)光谱对材料的结晶学特性及微结构进行了表征.制备的SnO2/ZnO复合材料是由纳米量级的小颗粒构成的分级结构材料.ZnO含量不同,对应的SnO2/ZnO复合材料结构不同.表征结果表明ZnO的掺杂量对SnO2材料的形貌及结构均起着重要作用.将制备的不同ZnO含量的SnO2/ZnO复合材料进行气敏测试,测试结果表明,Sn:Zn摩尔比为1:1制作的气敏元件对甲醇的灵敏度优于其它摩尔比的气敏元件.讨论了SnO2/ZnO复合材料气敏元件的敏感机理.同时针对Sn:Zn摩尔比为1:1时表现出最好的气敏响应,分析了其原因,包括Zn的替位式掺杂行为、ZnO的催化作用、过量ZnO对SnO2生长的抑制作用以及SnO2与ZnO晶粒界面处的异质结.