Protection of iron corrosion by stearic acid and stearic imidazoline self-assembled monolayers

A type of stearic imidazoline (IM) inhibitor was prepared using stearic acid (SA) and diethylenetriamine (DETA) as raw materials. The monolayers of IM and SA were assembled on the iron surface. The electrochemical characterization of stearic acid (SA) and stearic imidazoline (IM) on an oxide free iron surface had been studied. The monolayers of IM inhibitor were characterized by electrochemical impedance spectroscopy (EIS), electrochemical polarization curves, double layer capacitance, X-ray photoelectron spectroscopy (XPS) and molecular simulation. The results of electrochemical studies had illustrated that the inhibition efficiency of IM was higher than SA. XPS showed that the IM molecules adsorbed on the iron surface. The molecular simulation calculations showed that the IM molecules were tilted at an angle on the iron surface.     

Structural characterization and ferromagnetic behavior of Fe-doped TiO2 powder by high-energy ball milling

Fe-doped TiO₂ powder was prepared by high-energy ball milling, using TiO₂ Degussa P-25 and α-Fe powders as the starting materials. The structure and magnetic properties of the Fe-doped TiO₂ powder were studied by X-ray diffraction, ⁵⁷Fe Mossbauer spectroscopy and vibrating sample magnetometer. The Reitveld refinement of XRD revealed that ball milling not only triggered incorporation of Fe in TiO₂ lattice but also induced the phase transformation from anatase to rutile in TiO₂ and consequently the milled Fe-doped TiO₂ powder contained only rutile.⁵⁷Fe Mössbauer effect measure showed that Fe atoms existed in Fe²⁺ and Fe³⁺ state, which were assigned to the solid solution Fe_xTi_1−xO₂. The magnetization measurements indicated that the milled Fe-doped TiO₂ powder was ferromagnetic above room temperature. The ferromagnetism in our milled Fe-doped TiO₂ powder seemingly does not come from Fe and iron oxides particles/clusters but from the Fe-doped TiO₂ powder matrices.     

新超导体MgCNi3的虚晶掺杂研究

用全势线性缀加平面波方法,考虑局域自旋密度近似研究虚晶掺杂MgCNi3的超导电性和磁性.计算了自旋极化能带结构、体弹性模量和它对压力的导数、原子磁矩 m 及其变化率.计算结果表明,对于电子掺杂的Mg1-xAlxCNi3(0≤x≤0.5), 超导电性和磁涨落随掺杂量的增加逐渐减小.空穴掺杂的Mg1-xNaxCNi3,在x＝0.12处出现铁磁相变,超导电性消失.在MgCNi3少量空穴掺杂区域(0≤x<0.12),表现为超导与磁涨落共存的不稳定状态.     

一种时延范德波尔电磁系统中的复杂行为(Ⅰ)——分岔与混沌现象

建立了一种可积的无穷维系统——时延范德波尔电磁系统，采用Poincaré映射分析了系统随参数E和λ变化发生的分岔与混沌现象，发现这种时延系统具有复杂的非线性动力学特性，例如吸引子共存、间歇性混沌、类似边界碰撞分岔通向混沌以及周期增加的现象.在研究系统时间混沌行为的同时，还对空间混沌行为进行了初步分析，通过描绘空间分布图发现时延范德波尔电磁系统随参数E和λ变化时，在空间中会呈现出周期和混沌等不同的图案. 关键词： 分岔 混沌 无穷维系统 时延范德波尔电磁系统     

Crystal field analysis of the magnetization curves of R2Fe17 and R2Fe17H3 (R=Tb,Ho,Er)

In this paper the values of the crystalline-electric-field parameters A_nm for R₂Fe₁₇ and R₂Fe₁₇H₃ (R=Tb,Ho,Er) are evaluated by fitting calculations to the magnetization curves measured on the single crystal at several temperatures. The fitted A_nm for R₂Fe₁₇ are strikingly different from those for the corresponding R₂Fe₁₇H₃. The energy gaps between the lowest four energy levels for Ho ions in Ho₂Fe₁₇₂ can be reproduced by using the fitted A_nm and exchange field 2μ_BH_ex, which estimated from the fit of the temperature dependence of the spontaneous magnetization combined with inelastic neutron scattering experiment.     

Entanglement of Momentum for a Single Photon with a Single Atom

In this talk, the interaction of a single photon injected to a single atom is studied, for which initially the photon is uncorrelated with the atom. The spontaneous emitted photon will then evolve to be entangled with the atom on their continuous kinetic variables （momentum） in the process of resonant scattering. We find the relations between the entanglement and their physical control parameters （such as the linewidth of the injected photon wave packet, and that of the atomic wave packet, etc. ）, which indicates that high entanglement can be reached by broadening the scale of the atomic wave or squeezing the linewidth of the incident single-photon pulse.     

BP神经网络在光学相关器相关峰识别中的应用

光学相关识别是图像识别的重要方法，有效识别相关器输出平面的相关峰信号是保证光学相关器图像识别准确性的关键。由于激光器输出功率的波动、光学系统本身的误差以及SLM器件本身带来的噪声，采用一般的阈值方法很难达到理想的效果。该文提出对相关器的输出平面进行预处理，充分考虑相关信号的形状信息，提取感兴趣区域(ROI)，采用BP神经网络对输入矢量进行计算，可达到对相关峰信号和噪声的有效分类识别，从而提高了光学相关器识别的可靠性，降低了误判的概率。     

基于FPGA+DSP系统的红外图像非均匀校正的实现

首先引述了红外探测器两点法进行图像非均匀校正的原理,给出了基于DSP+FPGA的图像处理系统硬件模块整体实现框图,以及其非均匀校正模块的硬件结构。然后对其非均匀校正模块硬件实现中的芯片选择,工作流程以及实现作了详细的阐述。最后给出了非均匀校正试验的结果。