成像光谱技术的研究与发展

成像光谱技术是20世纪70年代末发展起来的一项新型航天航空遥感技术。综述了成像光谱技术的发展背景,在海洋、大气、植被、地质研究等领域的应用现状。介绍了成像光谱技术的几种主要分类、各种类型的特点以及国内外具有代表性的方案。提出了大孔径干涉型成像光谱仪的原理,并展示了攻关样机和实验数据。     

Proton Transfer Isomerization of Pyrazole in the Ground State:σν sπ Mechanism and Water Assisting Effect

The proton transfer isomerization of pyrazole and the water assisting effect by looping 1 to 4 water molecules on the singlet state potential energy surface have been investigated by using hybrid density functional theory method (B3PW91) with a 6-311++G** basis set. Two mechanisms were proposed to explain the mono- and multi-water assisting effects, respectively. The reactants and products of all groups have been characterized on their potential energy surfaces. For the isomerization of monomolecule pyrazole, the isomerization energy barrier is 46.4 kcal·mol-1. For the monohydration assisting mechanism, the reactant complex is connected to the product complex via two saddle points. The corresponding isomerization barriers are 46.7and 23.0 kcal(mol-1, respectively. As to the multihydration assisting mechanism, the isomerization barriers are 12.0, 10.9 and 13.14 kcal(mol-1 accordingly, when the number of water molecules is 2, 3 and 4, respectively. The multihydration assisting isomerization can occur in water-dominated environments, for example, in the organism, and thereby is crucial to energy transference. The deproton and dehydrogen energies of monomolecule pyrazole and various hydrated pyrazoles were calculated and then found much bigger than the isomerization barriers of their relative complexes, suggesting the impossibility of deprotonation or dehydrogenation. The isomerization of pyrazole is a proton-coupling-electron-migration process, but two different mechanisms are noticed, viz.σ- and π-type mechanisms. The π-bond of pyrazole participates in isomerization in the π-type mechanism, whereas only σelectron takes part in isomerization in the σ-type mechanism.     

杂多阴离子[GeMo12O40]4-α/β异构体的密度泛函研究

采用密度泛函方法，在DND基组水平上，对[GeMo12O40]^4-杂多阴离子最常见的α和β异构体进行了几何构型优化，得到了与X射线晶体衍射实验结果相一致的结构参数，并在此基础上进行了振动频率分析，得到了杂多阴离子的电子结构、热力学特性和振动光谱，通过定义α，β异构体异构化反应的Gibbs函变△Gα-β与温度的关系，研究了这两种异构体的相对稳定性．结果表明：低温时α异构体更稳定，高温时β异构体更稳定些，550K左右为转变点．振动频率分析得到2种异构体的最强峰位于4个频率位置，分别指认为vax(Mo-Od)，vas(Mo-Od)，vas(Mo-Oc-Mo)，vas(Ge-Oa)，vas(Mo-Ob-Mo)振动，与红外光谱(IR)的特征振动峰相对应，观察到了特征频率的振动模式，从理论计算角度说明了Rocchiccioli—Deltcheff关于振动模式的设想是合理的．     

Asymmetric organocatalytic allylic substitution of Morita-Baylis-Hillman carbonates with allylamines for the synthesis of 2,5-dihydropyrroles

The asymmetric allylic substitution reaction of MBH carbonates with allylamines has been developed, which affords N-allyl-β-amino-α-methylene esters in high yields and enantioselectivities. After a subsequent ring-closure metathesis of the products, a series of optically active 2,5-dihydropyrroles could be obtained smoothly in high yields without any loss of enantioselectivity. Finally, a tentative mechanism for rationalization of the reaction has been proposed.     

铁合金中微量钛元素的激光诱导击穿光谱研究

采用激光诱导击穿光谱对铁(Fe)合金中的钛元素(Ti)的含量进行测量。实验中激光器在最大能量输出(50 mJ),延时为1 μs时光谱信号的强度值最大。在此条件下,分别使用传统定标法和Fe Ⅰ 438.35 nm及Fe Ⅰ 427.12 nm两条谱线的内标法对铁合金中的Ti进行定量分析。内标法得到的拟合相关系数(r)分别为0.997 8和0.993 9,优于传统法得到的r(0.956 3)。提出了一种双谱线平均内标法,拟合得出r为0.998 4。同时,在浓度为0.063%～1.9%的范围内传统定标法测量的相对误差为23.7%,内标法的相对误差为6.0%,采用平均内标法后相对误差降为3.9%。最后,通过测量的Ti光谱计算了激光能量为50 mJ时所产生的等离子体温度为6 654.3 K,电子密度为1.072×1022 cm-3,并讨论了激光能量与烧蚀产生等离子体温度之间的关系。     

Experimental 511 W Composite Nd：YAG Ceramic Laser

We demonstrate a 511 W laser diode pumped composite Nd：YAG ceramic laser. The optical pumping system is consisted of five laser diode stacked arrays arranged in a pentagonal shape around the ceramic rod whose size is φ6.35×144mm. When the pumping power is 1600 W, the cw laser output up to 511 W at 1064nm can be obtained with a linear piano-piano cavity, and the optical-to-optical efficiency is 31.9%. To our knowledge, this is the highest value of laser output by using a newly invented composite Nd：YAG ceramic rod as the gain medium.     

Analysis of Cr atom focusing deposition properties in the double half Gaussian standing wave field

The use of the dipole force on atoms is a new technology that is used to build nanostructures. In this way, a high quality standard nano-grating can be obtained. Based on the semi-classical model, the motion equation is investigated and the trajectories of atoms in double half Gaussian standing wave field are simulated. Compared with the Gaussian standing wave field, the double half Gaussian standing wave can well focus the Cr atoms. In order to obtain this kind of beam, a prism is designed and the experimental result shows that the beam is well generated.     

共掺杂效应对Y2O3:Eu3+和Gd2O3:Eu3+发光影响的理论研究

通过在Y2O3:Eu3 和Gd2O3:Eu3 发光材料中掺入Li ,Mg2 ,Al3 等离子能有效地提高材料的发光强度,根据分子动力学和密度泛函计算的结果,认为这些离子多倾向于形成C2格位附近的间隙缺陷对,导致部分Y(Gd)-O的键长增加,提高了材料的量子效率的同时使得激发峰位出现红移,是引起材料发光增强的一个原因.     

含三苯胺基团的菲咯啉铁(Ⅱ)配合物电致变色材料的合成及性质

以4-甲酰基三苯胺和1,10-菲咯啉-5,6-二酮为原料,经过缩合、甲基化等反应合成了配体N-甲基-2-(4-二苯胺基苯基)咪挫并[4,5-f][1,10]-菲咯啉(TPAPhen),再与Fe~(2+)配位得到配合物[Fe(TPAPhen)_3](BF_4)_2,最后经过电化学聚合在ITO玻璃表面制备了新型电致变色材料poly-Fe(TPAPhen)_3。在外加电压作用下,poly-Fe(TPAPhen)_3聚合物薄膜表现出多种颜色变化和良好的电致变色性能,尤其是在721 nm处的光学对比度高达86%,着色效率高达971 cm2·C~(-1),并且表现出较快的响应速度(着色时间:2.6 s,褪色时间:5.3 s)。