Selective and sensitive detection of organic contaminants in water samples by on-line trace enrichment–gas chromatography–mass spectrometry

Liquid chromatographic (LC) type trace enrichment is coupled online with capillary gas chromatography (GC) with mass spectrometric (MS) detection for the analysis of aqueous samples. A volume of 1–10 ml of an aqueous sample is preconcentrated on a trace-enrichment column packed with a polymeric stationary phase. After cleanup with HPLC-grade water the precolumn is dried with nitrogen and subsequently desorbed with ethyl acetate. A fraction of 60 μl is introduced on-line into a diphenyltetramethyldisilazane-deactivated retention gap under partially concurrent solvent evaporation conditions and using an early solvent vapor exit. The analytes are separated and detected by means of GC–MS. The potential of the LC–GC–MS system for monitoring organic pollutants in river and drinking water is studied. Target analysis is carried out with atrazine and simazine as model compounds; the detection limits achieved under full-scan and multiple ion detection conditions are 30 pg and 5 pg, respectively. Identification of unknown compounds (non-target analysis), is demonstrated using a river water sample spiked with 168 pollutants varying in polarity and volatility.     

Haloacrylic acids XI. Photochemical reactions of aliphatic aldehydes with methyl trifluoroacrylate

Photochemically initiated reactions of aliphatic aldehydes, namely acetaldehyde, propionaldehyde and butyraldehyde, with methyl trifluoroacrylate afforded γ-ketoesters of the type R-CO-CF₂CHF-COOCH₃ in the liquid phase. In the gas phase reaction further products were formed by addition of the aldehyde fragments to the olefinic bond of the methyl trifluoroacrylate.     

Development and optimization of ultra-high performance supercritical fluid chromatography mass spectrometry method for high-throughput determination of tocopherols and tocotrienols in human serum

The goal of this study was to develop an effective supercritical fluid chromatography method using single quadrupole MS for analysis of all isomeric forms of vitamin E. Finally, two fast and effective methods, the high resolution one and the high speed one, for the determination of 8 vitamin E isomers in human serum were developed.     

Internal plasticization of poly(vinyl) chloride using glutamic acid as a branched linker to incorporate four plasticizers per anchor point

Internal plasticization of polyvinyl chloride (PVC) using thermal azide‐alkyne Huisgen dipolar cycloaddition between azidized PVC and electron‐poor acetylenediamides incorporating a branched glutamic acid linker resulted in incorporation of four plasticizing moieties per attachment point on the polymer chain. A systematic study incorporating either alkyl or polyethylene glycol esters provided materials with varying degrees of plasticization, with depressed T_g values ranging from ?1 °C to 62 °C. Three interesting trends were observed. First, T_g values of PVC bearing various internal plasticizers were shown to decrease with increasing chain length of the plasticizing ester. Second, branched internal plasticizers bearing triethylene glycol chains had lower T_g values compared to those with similar length long‐chain alkyl groups. Finally, thermogravimetric analysis of these internally plasticized PVC samples revealed that these branched internal plasticizers bearing alkyl chains are more thermally stable than similarity branched plasticizers bearing triethylene glycol units. These internal tetra‐plasticizers were synthesized and attached to PVC‐azide in three simple synthetic steps. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1821–1835     

Foliations on $$\mathbb {P}^2$$ P 2 with only one singular point

Geometriae Dedicata - We prove a criterion for Benjamini-Schramm convergence of periodic orbits of Lie groups. This general observation is then applied to homogeneous spaces and the space of...     

Three-Stage Extraction of Gelatines from Tendons of Abattoir Cattle: 2—Properties of Gelatines

The subject of our previous paper (part 1) was three-stage extraction of gelatines from short cattle tendons. In this paper, we studied influence of extraction conditions on quality of produced gelatines??protein content, ash content, rigidity of gelatine gels, viscosity, and distribution of molecular weights. Ash content of gelatines ranged in limits 3.5?C10.5?%. Rigidity of the gels was influenced by extraction conditions and by elastin content in gelatines; highest-quality gels display rigidity of 213 Bloom. Viscosity of gelatines ranged from 2.47 to 12.11?mPa?s. Molecular weights of gelatines display a proportion of fractions from 20 to 36?kDa, a quite high proportion of fractions from approximately 50 to 100?kDa, in some cases even fractions above 200?kDa appear. It was found that transition temperature and melting temperature of gelatines extracted from tendons are in accord with data on gelatines obtained by traditional extraction techniques from skins and bones. With respect to efficiency of the whole extraction process and to quality of extracted gelatine, we may recommend extraction conditions as follows: in the 1st processing stage, shaking degreased starting material with water in ratio 1:10 at 25?°C for 5?h; in the 2nd stage, treating the swelled material with 5?% (w/w) added proteolytic enzyme at 40?°C for 25?h; in 3rd stage, extracting gelatine while boiling for 16?min.     

A mass‐conservative staggered immersed boundary model for solving the shallow water equations on complex geometries

In this work, an approach is proposed for solving the 3D shallow water equations with embedded boundaries that are not aligned with the underlying horizontal Cartesian grid. A hybrid cut‐cell/ghost‐cell method is used together with a direction‐splitting implicit solver: Ghost cells are used for the momentum equations in order to prescribe the correct boundary condition at the immersed boundary, while cut cells are used in the continuity equation in order to conserve mass. The resulting scheme is robust, does not suffer any time step limitation for small cut cells, and conserves fluid mass up to machine precision. Moreover, the solver displays a second‐order spatial accuracy, both globally and locally. Comparisons with analytical solutions and reference numerical solutions on curvilinear grids confirm the quality of the method. Copyright © 2015 John Wiley & Sons, Ltd.     

Controlling 6-endo-selectivity in oxidation/bromocyclization cascades for synthesis of aplysiapyranoids and other 2,2,6,6-substituted tetrahydropyrans

A cascade, composed of (i) oxovanadium(V)-catalyzed oxidation of bromide by tert-butyl hydroperoxide and (ii) stereoselective 6-endo-bromocyclization, affords 3-bromo-2-aryl-2,6,6-trimethyltetrahydropyrans from styrene-type tertiary alkenols in synthetically useful yields. (E)-Alkenols add the bromo- and the alkoxy substituent anti-selectively across the double bond, indicating a bromonium ion-mechanism for the ring closure. 6-endo-control of the alkenol cyclization thereby arises from the polar effect of the aryl substituent. Two methyl substituents bound to the alkene terminus are not similarly able to favor 6-endo-cyclization, because strain arising from methyl group repulsion, as the bromonium-activated π-bond and the hydroxyl oxygen approach, directs bromocyclization of tertiary prenyl-type substrates toward tetrahydrofuran formation. A hexasubstituted bromotetrahydropyran prepared from the oxidation/bromocyclization cascade served as starting material for synthesis of racemic aplysiapyranoid A, in a sequence of free radical and polar functional group interconversion.