Aspects of the Reduction of Double Bonds Using Cob (I)alamin as Catalys

The olefinic system in 3β-methoxy-4-cholesten-6 a-ol ( 2 ) is reduced using cob (I)alamin ( 1 ( I ); see Scheme 1) as catalyst, aqueous acetic acid as solvent and metallic zinc as electron source (cf. Schemes 2 and 3). Experimental evidence for an attack of 1 ( I ) on both faces of the double bond is presented. By the same catalyst (1 R)-10, 10-dimethyl-2-pinene- 10-carbonitrile ( 9 ) is first transformed to the menthene derivative 11 (see Schemes 4 and 5). The ring opening is then followed by a fast saturation of the disubstituted olefinic system in 11 , and ultimately the remaining double bond is reduced in a slow reaction. The cis-configurated saturated menthane derivative 16 is the main final product ( 16 / 17 ≈ 10:1).     

Anomalous dehydration of 2-phenylindole-3-carboxamide to 2-phenylindole-3-carbonitrile by lithium aluminum hydride

Steric factors have been shown to be responsible for the anomalous dehydration of 2-phenylindole-3-carboxamide (1) to 2-phenylindole-3-carbonitrile (3) by lithium aluminum hydride. This steric effect was also reflected in the reactions of 2-phenylindole (4) and its derivatives.

---

Anomale Dehydratisierung von 2-Phenylindol-3-carbonsäureamid zu 2-Phenyl-indol-3-carbonitril mit Lithiumaluminiumhydrid (Kurze Mitteilung)

Zusammenfassung Es wird gezeigt, daß für die anomale Dehydratisierung von 2-Phenylindol-3-carbonsäureamid (1) zum entsprechenden Nitril3 durch Lithiumaluminiumhydrid sterische Faktoren verantwortlich sind. Dieser sterische Effekt zeigt sich auch bei Reaktionen von 2-Phenylindol (4) und seiner Derivate.

     

The asymmetric syntheses of the C-1 sidechains of zaragozic acid A and zaragozic acid C

The asymmetric syntheses of the C-1 sidechains of zaragozic acid A and C are described. Aldol reaction defines the chirality at C-4′and C-5′in two independent routes. Multigram preparation as well as a route amenable to derivatization are highlights of these approaches.     

Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.     

A robust multisyringe system for process flow analysis. Part II. A multi-commuted injection system applied to the photometric determination of free acidity and iron(III) in metallurgical solutions

A new software-controlled volume-based system for sample introduction in process flow injection analysis was developed. By using a multi-syringe burette coupled with one or two additional commutation valves, the multi-commuted injection of precise sample volumes was accomplished. Characteristics and performance of the injection system were studied by injecting an indicator in a buffered carrier. Three configurations were implemented in order to achieve two different tasks: the single injection of a sample in a two- or three-channels manifold, and the dual injection into different streams. The two channel flow system using the single injection was applied to the determination of free acidity in diluted samples containing high levels of iron(III), by employing the single point titration methodology. The precipitation of ferric hydroxide was prevented using the ammonium and sodium salts of oxalate and acetate as buffer titrant. Methyl Red was employed as indicator. The procedure allows determination of acid concentration in solutions with a Fe(III)/H+ molar ratio up to 0.2. Samples with higher Fe(III)/H+ molar ratios were spiked with a known strong acid at dilution. The three-channel configuration was applied to the determination of ferric ions, using, as reagent, a merging mixture of sulfuric acid and potassium thiocyanate. The double injection system was implemented in series in a single (three-channel) manifold in such a way that a different injection volume and a changed reagent were used for each analyte. It was applied to the separated or sequential determination of free acidity and ferric ions. In this configuration, iron(III) was determined using 0.5-0.7% (w/v) sodium salicylate solution as reagent. The systems can operate at up to 100, 84 and 78 injections per hour, respectively. Determinations on synthetic and process samples compared well with the reference values and procedures. Recoveries of 95-102% with a maximum RSD value of 5.4% were found for acidity. The respective values obtained for iron determinations were 96-105% and 4.3%.     

Germacrene A is a product of the aristolochene synthase-mediated conversion of farnesylpyrophosphate to aristolochene

The biosynthesis of several sesquiterpenes has been proposed to proceed via germacrene A. However, to date, the production of germacrene A has not been proven directly for any of the sesquiterpene synthases for which it was postulated as an intermediate. We demonstrate here for the first time that significant amounts of germacrene A (7.5% of the total amount of products) are indeed released from wild-type aristolochene synthase (AS) from Penicillium roqueforti. Germacrene A was identified through direct GC-MS comparison to an authentic sample and through production of beta-elemene in a thermal Cope rearrangement. AS also produced a small amount of valencene through deprotonation of C6 rather than C8 in the final step of the reaction. On the basis of the X-ray structure of AS, Tyr 92 was postulated to be the active-site acid responsible for protonation of germacrene A (Caruthers, J. M.; Kang, I.; Rynkiewicz, M. J.; Cane, D. E.; Christianson, D. W. J. Biol. Chem. 2000, 275, 25533-25539). The CD spectra of a mutant protein, ASY92F, in which Tyr 92 was replaced by Phe, and of AS were very similar. ASY92F was approximately 0.1% as active as nonmutated recombinant AS. The steady-state kinetic parameters were measured as 0.138 min(-1) and 0.189 mM for k(cat) and K(M), respectively. Similar to a mutant protein of 5-epi-aristolochene (Rising, K. A.; Starks, C. M.; Noel, J. P.; Chappell, J. J. Am. Chem. Soc. 2000, 122, 1861-1866), the mutant released significant amounts of germacrene A (approximately 29%). ASY92F also produced various amounts of a further five hydrocarbons of molecular weight 204, valencene, beta-(E)-farnesene, alpha- and beta-selinene, and selina-4,11-diene.     

Phenylsulfonyl ene-allenes as efficient precursors to bicyclic systems via intramolecular [2 + 2]-cycloaddition reactions

Various phenylsulfonyl allene derivatives were prepared with double bonds tethered either to the alpha-position or the gamma-position of the allene. These substrates underwent a highly regio- and stereospecific thermal [2 + 2]-cycloaddition across the nonactivated cumulene double bond, forming distal cycloadducts (i.e., 57) in the case of alpha-tethered allenes and proximal adducts (i.e., 25) in the case of gamma-tethered allenes. The mechanistic rationale for the observed stereospecificity involves initial diradical formation, followed by a rapid ring closure to the more stable cis-fused ring system. The tether may be equipped with heteroatoms, allowing for the formation of fused heterocycles (e.g., 61), and the cycloaddition can be facilitated by the introduction of sterically bulky groups and/or by conformational rigidity to the tether. Other modes of cyclization were observed in the presence of sodium benzenesulfinate or Lewis acids, in which cases polar mechanisms prevail. The chemoselectivity is reversed for [4 + 2]-cycloadditions, which prefer instead to engage the vinyl sulfone moiety, independent of whether the tether is attached to the alpha- or gamma-position of the allene.     

Factors affecting gas-phase deuterium scrambling in peptide ions and their implications for protein structure determination

In this report, we evaluate the validity of using hydrogen/deuterium exchange in combination with collision-induced dissociation mass spectrometry (CID MS) for the detailed structural and conformational investigation of peptides and proteins. This methodology, in which partly deuterated peptide ions are subjected to collision-induced dissociation in the vacuum of a mass spectrometer, has emerged as a useful tool in structural biology. It may potentially provide quantitatively the extent of deuterium incorporation per individual amino acid in peptides and proteins, thus providing detailed structural information related to protein structure and folding. We report that this general methodology has limitations caused by the fact that the incorporated deuterium atoms migrate prior or during the CID MS analysis. Our data are focused on a variety of transmembrane peptides, incorporated in a lipid bilayer, in which the near-terminal amino acids that anchor at the lipid-water interface are systematically varied. Our findings suggest that, under the experimental conditions we use, the extent of intramolecular hydrogen scrambling is strongly influenced by experimental factors, such as the exact amino acid sequence of the peptide, the nature of the charge carrier, and therefore most likely by the gas-phase structure of the peptide ion. Moreover, the observed scrambling seems to be independent of the nature of the peptide fragment ions (i.e., protonated B and Y' ' ions, and sodiated A and Y' ions). Our results strongly suggest that scrambling may be reduced by using alkali metal cationization instead of protonation in the ionization process.     

Collisionally induced dissociation mass spectrometric studies of perfluorinated 1H-heptane,tert-butanol, 2-butyltetrahydrofuran and isopropyl bromobutyl ether

High-energy collision-activated dissociation in connection with mass-analyzed ion kinetic energy spectrometry (CAD/MIKES) was employed to probe the structures of some ions generated by methane chemical ionization (CI) and negative ion chemical ionization (NICI) of the title compounds. CAD/MIKES results show that the [M ? H]^? ion of lH-perfluorobeptane and the [O(CF₂)₄Br]^? ion of perfluoroisopropylbromobutyl ether are stable. The methane CI of these fluorocarbons also showed that the expulsion of HF molecules appears to be a major driving force for further fragmentations.     

Theoretical Study of Electronic Structures and Spectra of Chalcogenido Complexes of Molybdenum, trans-Mo(Q)(2)(PH(3))(4) (Q = O, S, Se, Te)

Electronic structures of the title complexes have been studied using quantum chemical computations by different methods. It is shown that the results of Xalpha calculations agree well with expectations from classical ligand-field theory, but both are far from being in agreement with the results given by ab initio calculations. The HOMO in the ab initio Hartree-Fock molecular orbital diagrams of all these complexes is a chalcogen p(pi) lone pair orbital rather than the metal nonbonding d(xy)() orbital previously proposed. Electronic transition energies were calculated by CASSCF and CI methods. The results suggest that in the cases when Q = S, Se, and Te the lowest energy transitions should be those from the p(pi) lone pair orbitals to the metal-chalcogen pi orbitals. The calculated and observed electronic spectra of the oxo complex are in good agreement and very different from the spectra of the other complexes, and the lowest absorptions were accordingly assigned to transitions of different origins.