Mice spermatogonial stem cells transplantation induces macrophage migration into the seminiferous epithelium and lipid body formation: high-resolution light microscopy and ultrastructural studies

Transplantation of spermatogonial stem cells (SSCs), the male germline stem cells, in experimental animal models has been successfully used to study mechanisms involved in SSC self-renewal and to restore fertility. However, there are still many challenges associated with understanding the recipient immune response for SSCs use in clinical therapies. Here, we have undertaken a detailed structural study of macrophages elicited by SSCs transplantation in mice using both high-resolution light microscopy (HRLM) and transmission electron microscopy (TEM). We demonstrate that SSCs transplantation elicits a rapid and potent recruitment of macrophages into the seminiferous epithelium (SE). Infiltrating macrophages were derived from differentiation of peritubular monocyte-like cells into typical activated macrophages, which actively migrate through the SE, accumulate in the tubule lumen, and direct phagocytosis of differentiating germ cells and spermatozoa. Quantitative TEM analyses revealed increased formation of lipid bodies (LBs), organelles recognized as intracellular platforms for synthesis of inflammatory mediators and key markers of macrophage activation, within both infiltrating macrophages and Sertoli cells. LBs significantly increased in number and size in parallel to the augmented macrophage migration during different times post-transplantation. Our findings suggest that LBs may be involved with immunomodulatory mechanisms regulating the seminiferous tubule niche after SSC transplantation.     

Dual asymmetric-flow microdialysis for in vivo monitoring of brain neurochemicals

Microdialysis is an extensively used technique for both in vivo and in vitro experiments, applicable to animal and human studies. In neurosciences, the in vivo microdialysis is usually performed to follow changes in the extracellular levels of substances and to monitor neurotransmitters release in the brain of freely moving animals. Catecholamines, such as dopamine and their related compounds, are involved in the neurochemistry and in the physiology of mental diseases and neurological disorders. It is generally supposed that the brain's energy requirement is supplied by glucose oxidation. More recently, lactate was proposed to be the metabolic substrate used by neurons during synaptic activity. In our study, an innovative microdialysis approach for simultaneous monitoring of catecholamines, indolamines, glutamate and energy substrates in the striatum of freely moving rats, using an asymmetric perfusion flow rate on microdialysis probe, is described. As a result of this asymmetric perfusion, two samples are available from the same brain region, having the same analytes composition but different concentrations. The asymmetric flow perfusion could be a useful tool in neurosciences studies related to brain's energy requirement, such as toxin-induced models of Parkinson's disease.     

Comparison of Lattice-Fluid Binary Parameters For Mixtures and Block Copolymers

The aim of this report is to discuss the method of determination of lattice-fluid binary interaction parameters by comparing well characterized immiscible blends and block copolymers of poly(methyl methacrylate) (PMMA) and poly(??caprolactone) (PCL). Experimental pressure-volume-temperature (PVT) data in the liquid state were correlated with the Sanchez—Lacombe (SL) equation of state with the scaling parameters for mixtures and copolymers obtained through combination rules of the characteristic parameters for the pure homopolymers. The lattice-fluid binary parameters for energy and volume were higher than those of block copolymers implying that the copolymers were more compatible due to the chemical links between the blocks. Therefore, a common parameter cannot account for both homopolymer blend and block copolymer phase behaviors based on current theory. As we were able to adjust all data of the mixtures with a single set of lattice-binary parameters and all data of the block copolymers with another single set we can conclude that both parameters did not depend on the composition for this system. This characteristic, plus the fact that the additivity law of specific volumes can be suitably applied for this system, allowed us to model the behavior of the immiscible blend with the SL equation of state. In addition, a discussion on the relationship between lattice-fluid binary parameters and the Flory–Huggins interaction parameter obtained from Leibler's theory is presented.     

AFM and contact angle investigation of growth and structure of pp-HMDSO thin films

HMDSO was plasma polymerized on silicon wafer and polyethylene (PE) substrates. The chemical structure of the pp-HMDSO was analyzed with Fourier-transform infrared (FT-IR) spectroscopy. The morphological structure of the thin films deposited on the different substrates was investigated by means of atomic force microscopy (AFM), indicating different coverage mechanisms. In order to investigate the growth process of the pp-HMDSO, films of different thickness were also deposited, varying the plasma deposition time from 10 s to 1800 s. Thickness and structure of such deposits was detected with AFM. Finally, hydrophobic characteristics of the different samples were evaluated by means of contact angle measurements and correlated with the morphological characteristics.     

Extreme fluctuation events in a simple high-density traffic model

We revisit a simple car-following model adapting it for simulating high-density traffic dynamics. Simulations in continuum space and discrete time are presented for the case of a single traffic lane, using periodic boundary conditions. The model parameters are fitted to empirical data for the mean car speed versus car density for densities higher than . The time evolution of the car ensemble is studied upon application of different types of random perturbations yielding strong speed fluctuations in all cases, the latter characterized by probability distribution functions displaying fat tails. We attempt to study the phenomenon of stop-and-go along the lane in the absence of perturbations by assuming a stopping cutoff speed, and find the resulting behavior of the ensemble both in space and time.     

Measurement of the exclusive 3He(e,e'p) reaction below the quasielastic peak

New, high-precision measurements of the 3He(e,e(')p) reaction using the A1 Collaboration spectrometers at the Mainz microtron MAMI are presented. These were performed in antiparallel kinematics at energy transfers below the quasielastic peak, and at a central momentum transfer of 685 MeV/c. Cross sections and distorted momentum distributions were extracted and compared to theoretical predictions and existing data. The longitudinal and transverse behavior of the cross section was also studied. Sizable differences in the cross-section behavior from theoretical predictions based on the plane wave impulse approximation were observed in both the two- and three-body breakup channels. Full Faddeev-type calculations account for some of the observed excess cross-section, but significant differences remain.     

A liquid chromatography tandem mass spectrometry method for simultaneous analysis of 46 atmospheric particulate-phase persistent organic pollutants and comparison with gas chromatography/mass spectrometry

A novel multi-analyte method for the simultaneous determination of 46 compounds of environmental concern, most of them belonging to the category of persistent organic pollutants, was developed using high-performance liquid chromatography and the results were compared to those obtained by gas chromatography. This study was performed in perspective of a cumulative exposure assessment of substances of health concern in environments where high levels, relatively to airborne particulate matter, can be found. The target compounds included polychlorinated biphenyls, brominated flame–retardants and derivatives of polycyclic aromatic hydrocarbons.

The multi-analyte method was evaluated in air particulate matter in terms of reproducibility, linearity, recovery, limits of detection and quantification and matrix effect. The recovery was above 70% for all the analytes, whereas limits of quantification ranged between 23 and 390 pg?m^?3 in liquid chromatography and less than ten times in gas chromatography–mass spectrometry.

Matrix effect was generally negligible for both the techniques, except the case of the detection of oxygenated derivatives of polycyclic aromatic hydrocarbons by gas chromatography.

In order to demonstrate the efficacy and to assess the method performances (accuracy and precision), both the techniques were applied to standard reference materials, and the results were compared, discussing their advantages and disadvantages.

The method was finally applied to a real sample of indoor airborne particulate matter with aerodynamic diameter ≤4 μm (PM₄).

We demonstrated that liquid chromatography was the only technique able to analyse the 46 compounds, including thermally degradable ones, with a single chromatographic run without derivatisation steps. On the other hand, gas chromatography still presents higher sensitivity for the detection of some of the investigated compounds. This study can be considered only explorative and further improvements can be expected with new-generation LC-MS instruments (10–100 times more sensitive).     

A simple model to explain the complex kinetic behavior of epoxy/anhydride systems

A survey of the literature dealing with the kinetics of epoxy/anhydride polymerizations initiated by tertiary amines, shows inconsistencies in results reported by several authors. Both first-order and autocatalytic expressions have been used to fit experimental results. In the former case, significantly different values of apparent activation energies were found in isothermal and nonisothermal experiments. A simple kinetic model is proposed to explain these inconsistencies, based on the following steps: (a) a reversible reaction transforming an inactive initiator species into an active one, (b) a propagation step, and (c) a chain transfer step regenerating the active initiator (step not relevant to the kinetic analysis). The simple model explains both the first-order and autocatalytic behaviors reported in the literature. It also leads to the experimental values of the apparent activation energies obtained under different conditions. It is also shown that isoconversional methods should not be applied to obtain fundamental kinetic parameters in systems where the reaction rate depends on the concentration of an active species that varies independently of the conversion of functional groups. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2799–2805, 1999     

Thermomechanical Buckling Analysis of the E&P-FGM Beams Integrated by Nanocomposite Supports Immersed in a Hygrothermal Environment

Due to the widespread use of sandwich structures in many industries and the importance of understanding their mechanical behavior, this paper studies the thermomechanical buckling behavior of sandwich beams with a functionally graded material (FGM) middle layer and two composite external layers. Both composite skins are made of Poly(methyl methacrylate) (PMMA) reinforced by carbon-nano-tubes (CNTs). The properties of the FGM core are predicted through an exponential-law and power-law theory (E&P), whereas an Eshelby–Mori–Tanaka (EMT) formulation is applied to capture the mechanical properties of the external layers. Moreover, different high-order displacement fields are combined with a virtual displacement approach to derive the governing equations of the problem, here solved analytically based on a Navier-type approximation. A parametric study is performed to check for the impact of different core materials and CNT concentrations inside the PMMA on the overall response of beams resting on a Pasternak substrate and subjected to a hygrothermal loading. This means that the sensitivity analysis accounts for different displacement fields, hygrothermal environments, and FGM theories, as a novel aspect of the present work. Our results could be replicated in a computational sense, and could be useful for design purposes in aerospace industries to increase the tolerance of target productions, such as aircraft bodies.     

Phase separation induced by a chain polymerization: Polysulfone-modified epoxy/anhydride systems

The reaction-induced phase separation in a blend of a commercial polysulfone (PSu) with diepoxide-cyclic anhydride monomers, was studied. The diepoxide was based on diglycidylether of bisphenol A (DGEBA) and the hardener was methyl tetrahydrophthalic anhydride (MTHPA), used in stoichiometric proportion. Benzyldimethylamine (BDMA) was used as initiator. PSu had no influence on the polymerization kinetics, the gel conversion, and the overall heat of reaction per epoxy equivalent. A kinetic model including initiation, propagation, and termination steps was used to estimate the distribution of linear and branched species in the first stages of the chain-wise copolymerization. This distribution, together with the PSu distribution, were taken into account in a thermodynamic model of the blend. The interaction parameter was fitted from experimental determinations of conversions at the start of phase separation, obtained under different conditions. The thermodynamic model was used to explain the complex morphologies developed in materials containing different PSu concentrations as well as their dynamic mechanical response. The shift in glass transition temperatures was explained by the fractionation of different species during the phase separation process. Phase inversion produced a significant decrease of the elastic modulus in the glassy state and a thermoplastic-like behavior of the material in the rubbery region. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1349–1359, 1998