Electrocatalytically Active Fe‐(O‐C2)4 Single‐Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Single‐atom catalysts have demonstrated their superiority over other types of catalysts for various reactions. However, the reported nitrogen reduction reaction single‐atom electrocatalysts for the nitrogen reduction reaction exclusively utilize metal–nitrogen or metal–carbon coordination configurations as catalytic active sites. Here, we report a Fe single‐atom electrocatalyst supported on low‐cost, nitrogen‐free lignocellulose‐derived carbon. The extended X‐ray absorption fine structure spectra confirm that Fe atoms are anchored to the support via the Fe‐(O‐C₂)₄ coordination configuration. Density functional theory calculations identify Fe‐(O‐C₂)₄ as the active site for the nitrogen reduction reaction. An electrode consisting of the electrocatalyst loaded on carbon cloth can afford a NH₃ yield rate and faradaic efficiency of 32.1 μg h^?1 mg_cat.^?1 (5350 μg h^?1 mg_Fe^?1) and 29.3 %, respectively. An exceptional NH₃ yield rate of 307.7 μg h^?1 mg_cat.^?1 (51 283 μg h^?1 mg_Fe^?1) with a near record faradaic efficiency of 51.0 % can be achieved with the electrocatalyst immobilized on a glassy carbon electrode.     

Porous Organic Molecular Frameworks with Extrinsic Porosity: A Platform for Carbon Storage and Separation

The assembly of porous organic molecular frameworks (POMFs), which typically evidence common feasibility and compatibility, purification, and regeneration at practical conditions, remains a strategic challenge in modern materials science and is crucial for their favorable applications in biological, medical, and environmental realms. However, instructive knowledge of well‐organized POMF assembly by supramolecular interactions is, in general, ambiguous to date. Nevertheless, a significant advance in controlled POMF assembly has been recently achieved. This Minireview highlights these approaches, with a particular focus on the design of molecular constituents and assembly strategies. We also look beyond the field of solid‐state POMF materials into the assembly and recognition in solution, thus covering recent advances in POMFs based on material design and applications in carbon storage and separation.     

Carnation‐like CuO Hierarchical Nanostructures Assembled by Porous Nanosheets for Nonenzymatic Glucose Sensing

Carnation‐like CuO hierarchical nanostructures assembled by ultrathin porous nanosheets were successfully fabricated via a facile solvothermal route followed with heat treatment. As‐prepared CuO nanostructures exhibited excellent catalytic activity toward glucose oxidation in the absence of any enzymes. Under the optimized conditions, the CuO‐based enzymeless glucose sensor showed high sensitivity of 3.15 mA mM^?1 cm^?2, low limit of detection (98 nM, S/N=3), good reproducibility, excellent selectivity and long‐time stability. The superb nonenzymatic glucose sensing performance of the CuO hierarchical nanostructures was attributed to the highly catalytically active sites at the edges and basal planes of the CuO nanosheets, facile transportation of analytes through the abundant mesopores and macropores, robust and stable hierarchical structure. Moreover, the CuO‐based enzymeless glucose sensor showed high accuracy and reliability in comparison with clinical glucometer for quantitative determination of glucose in human blood serum samples.     

Synthesis,Structures, and Fluorescent Properties of Three Cobalt‐Based Coordination Polymers with a Rigid Tripodal Carboxylate Ligand

Three cobalt(II) coordination polymers, [Co₂(tatb)₂(2,2′‐bipy)₂ (H₂O)₂ · DMA · 2H₂O] ( 1 ), [Co₂(tatb)₂(1,10‐phen)₂(H₂O)₂ · 2H₂O] ( 2 ) and [Co(tatb)(1,3‐dpp) · H₂O] ( 3 ) (H₃tatb = 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoic acid; 2,2′‐bipy = 2,2′‐bipyridyl; 1,10‐phen = 1,10‐phenanthroline; 1,3‐dpp = 1,3‐bis(pyridin‐4‐yl)propane), were synthesized solvothermally and characterized by single‐crystal and powder X‐ray diffraction (PXRD), as well as IR spectroscopy. Complexes 1 and 2 exhibit 1D double‐chain structures, which further connect into interesting 3D networks by hydrogen bond and strong π–π interactions. Complex 3 possesses 2D 4⁴‐sql topology, which is packed parallel in an AA fashion. Moreover, thermal stability properties and photoluminescence properties of 1 , 2 and 3 were also investigated.     

3D-structured carbon-coated MnO/graphene nanocomposites with exceptional electrochemical performance for Li-ion battery anodes

MnO has a high theoretical capacity, moderate discharge plateau, and low polarization when it is used as the anode material in lithium battery. However, the issues that limit its application are its poor conductivity and large volume changes, which can easily result in the collapse of electrode structure during long-term cycling. In the present work, a carbon-coated MnO/graphene 3D-network anode material is synthesized by an electrostatic adsorption of dispersed precipitates precipitation method. The MnO nanoparticles coated by carbon are uniformly distributed on the surface of graphene nanosheets and form a 3D sandwich-like nanostructure. A carbon layer is coated on the surface of MnO nanoparticles, which slows down the volume expansion in the process of lithium intercalation. The graphene nanosheets are cross-linked through carbons in this 3D nanostructure, which provides mechanical support and effective electron conduction pathways during the charge-discharge. The electrochemical tests indicate that the prepared 3D carbon-coated MnO/graphene electrode exhibits an excellent rate capacity of 1247.3 and 713.2 mAh g^?1 at 100 and 1000 mA g^?1, respectively. The capacity is 792.2 mAh g^?1 after long cycle at a current density of 1000 mA g^?1. The specific capacity is higher than that of MnO-based composite lithium anode materials currently reported. The superior rate and cycling performances are attributed to the unique 3D-network structure, which provides an effectively conductive network, buffers volume expansion, and prevents falling and aggregation of MnO in the charge and discharge process of the electrode materials. The 3D-structured carbon-coated MnO/graphene anode material will have an excellent application prospect.

Open image in new window

Graphical abstract Cyclic performance at 1 A g^?1 and SEM images (inset) of the 3D-structured carbon-coated MnO/graphene nanocomposite.

     

基于零价铁的地下水化学还原修复体系中的电子转移有效性和电子竞争机制

近年来,基于零价铁的化学还原技术因其高效性逐渐被应用于受污染地下水的原位修复。但是,该技术在实际应用中仍面临一些亟待解决的问题。零价铁作为一种高活性的电子供体,除了和目标污染物反应外,还可以与地下水中其他的氧化性物质（如O₂、H⁺或NO₃^-等）反应。这些反应所造成的零价铁腐蚀,不仅会降低修复效率还会增加地下水修复成本。此外,同类或多类污染物间也存在对零价铁所释放电子的相互竞争,从而影响各自的去除效率。本文综述了基于零价铁的地下水修复体系中的电子传递过程和氧化物间的电子竞争机制,从零价铁的腐蚀和电子传递、零价铁电子选择性量化指标的提出和量化方法、地下水体中多种共存氧化物间电子竞争作用、电子效率的影响因素以及强化措施等方面进行详细介绍。最后,对该技术今后发展方向作出了展望,以期为其今后实际的地下水修复应用提供参考。     

固相萃取-毛细管液相色谱测定食品和水样中有机磷和氨基甲酸酯类杀虫剂残留

采用乙腈提取、固相萃取（SPE）富集浓缩技术结合自行研制开发的毛细管液相色谱（CLC）仪,同时分离测定了食品和水样中1种有机磷和3种氨基甲酸酯类杀虫剂残留。对影响SPE效率和CLC分离检测的各类因素进行了优化,包括固相萃取柱种类、样品pH、洗脱剂种类和体积、上样速率、盐效应、上样体积、检测波长、流动相种类和比例等。结果表明,4种杀虫剂在6 min内达到完全分离,检出限为0.35~1.20 μg/kg,定量限为1.17~4.00 μg/kg。使用该SPE-CLC法对西红柿、黄瓜、苹果样品和自来水、湖水水样进行加标回收测定,得到食品中加标回收率为72.41%~107.15%,相对标准偏差≤8.12%;水样中加标回收率为71.45%~109.25%,相对标准偏差≤9.28%。该法能够满足农药多残留分析要求。     

在线中空纤维膜液相微萃取/高效液相色谱法测定3种痕量芳香胺

建立了一种在线中空纤维膜液相微萃取/高效液相色谱联用技术测定3种痕量芳香胺(邻甲苯胺、3,3'-二甲基联苯胺、2-萘胺)的新方法,以顺序注射仪将中空纤维膜液相微萃取装置和高效液相色谱仪连接搭建在线检测装置,利用此装置优化了萃取溶剂、供体相、接收相、盐效应、搅拌速度、萃取时间等前处理条件。结果表明,以正辛醇为萃取溶剂,0.1 mol·L-1Na OH与300 mg·L-1的Na Cl溶液为供体相,0.1 mol·L-1HCl溶液为接收相,搅拌速度为400 r·min-1,萃取40 min后,3种芳香胺的富集倍数可达48~96倍。该方法对3种痕量芳香胺的线性范围为0.01~0.25 mg·L-1,相关系数(r)不小于0.998 4,检出限为0.3~2.2μg·L-1,相对标准偏差(RSD,n=10)为3.1%~4.0%,用于印染废水中3种芳香胺的分析,回收率为98.0%~102.0%。该方法操作简单,有机溶剂用量少,富集率较高,可用于痕量芳香胺类物质的快速分析。     

One‐pot Synthesis of CdS Nanocrystals Hybridized with Single‐Layer Transition‐Metal Dichalcogenide Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Exploration of low‐cost and earth‐abundant photocatalysts for highly efficient solar photocatalytic water splitting is of great importance. Although transition‐metal dichalcogenides (TMDs) showed outstanding performance as co‐catalysts for the hydrogen evolution reaction (HER), designing TMD‐hybridized photocatalysts with abundant active sites for the HER still remains challenge. Here, a facile one‐pot wet‐chemical method is developed to prepare MS₂–CdS (M=W or Mo) nanohybrids. Surprisedly, in the obtained nanohybrids, single‐layer MS₂ nanosheets with lateral size of 4–10 nm selectively grow on the Cd‐rich (0001) surface of wurtzite CdS nanocrystals. These MS₂–CdS nanohybrids possess a large number of edge sites in the MS₂ layers, which are active sites for the HER. The photocatalytic performances of WS₂–CdS and MoS₂–CdS nanohybrids towards the HER under visible light irradiation (>420 nm) are about 16 and 12 times that of pure CdS, respectively. Importantly, the MS₂–CdS nanohybrids showed enhanced stability after a long‐time test (16 h), and 70 % of catalytic activity still remained.