炭材料负载金属催化剂催化硅氢加成反应进展

炭材料具有比表面积大、孔径可调、取材广泛等优点,以其为载体负载金属活性组分制备硅氢加成催化剂极具发展前景.我们详细总结了近20年不同炭材料如活性炭、石墨与石墨烯、碳纳米管、富勒烯、卡宾等在硅氢加成反应中负载金属催化剂的制备方法、催化性能以及可能的催化机理,并对有望应用到该反应的新型炭材料载体进行了对比与展望.认为未来硅氢加成炭负载型催化剂的研究可聚焦于(1)探寻新型双金属活性组分以进一步提高催化活性;(2)研发更具优势的金属配体,明晰配体与载体、配体与金属之间的相互作用关系以提高催化选择性与稳定性;(3)结合科学可靠的催化机理研究,以期研发出更符合可持续发展要求的炭负载型硅氢加成金属催化剂,可使硅氢加成反应基本实现原子经济性.     

A novel intumescent flame retardant imparts high flame retardancy to epoxy resin

Intumescent flame retardant (IFR) has received the considerable attention ascribed to the inherent advantages including non‐halogen, low toxicity, low smoke release and environmentally friendly. In this work, a novel charring agent poly (piperazine phenylaminophosphamide) named as PPTA was successfully synthesized and characterized by Fourier transform infrared spectra (FTIR) and X‐ray photoelectron spectroscopy (XPS). Then, a series of flame‐retardant EP samples were prepared by blending with ammonium polyphosphate (APP) and PPTA. Combustion tests include oxygen Index (LOI), vertical Burning Test (UL‐94) and cone calorimeter testing,these test results showed that PPTA greatly enhances the flame retardancy of EP/APP. According to detailed results, EP containing 10 wt% APP had a LOI value of 30.2%,but had no enhancement on UL‐94 rating. However, after both 7.5 wt% APP and 2.5 wt% PPTA were added, EP‐7 passed UL‐94 V‐0 rating with a LOI value of 33.0%. Moreover, the peak heat release rate (PHRR) and peak of smoke product rate (PSPR) of EP‐7 were greatly decreased. Meanwhile, the flame‐retardant mechanism of EP‐7 was investigated by scanning electron microscopy (SEM), thermogravimetric analysis/infrared spectrometry (TG‐IR) and X‐ray photoelectron spectroscopy (XPS). The corresponding results presented PPTA significantly increased the density of char layer, resulting in the good flame retardancy.     

Electrocatalytically Active Fe‐(O‐C2)4 Single‐Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Single‐atom catalysts have demonstrated their superiority over other types of catalysts for various reactions. However, the reported nitrogen reduction reaction single‐atom electrocatalysts for the nitrogen reduction reaction exclusively utilize metal–nitrogen or metal–carbon coordination configurations as catalytic active sites. Here, we report a Fe single‐atom electrocatalyst supported on low‐cost, nitrogen‐free lignocellulose‐derived carbon. The extended X‐ray absorption fine structure spectra confirm that Fe atoms are anchored to the support via the Fe‐(O‐C₂)₄ coordination configuration. Density functional theory calculations identify Fe‐(O‐C₂)₄ as the active site for the nitrogen reduction reaction. An electrode consisting of the electrocatalyst loaded on carbon cloth can afford a NH₃ yield rate and faradaic efficiency of 32.1 μg h^?1 mg_cat.^?1 (5350 μg h^?1 mg_Fe^?1) and 29.3 %, respectively. An exceptional NH₃ yield rate of 307.7 μg h^?1 mg_cat.^?1 (51 283 μg h^?1 mg_Fe^?1) with a near record faradaic efficiency of 51.0 % can be achieved with the electrocatalyst immobilized on a glassy carbon electrode.     

Size-controlled flow synthesis of metal-organic frameworks crystals monitored by in-situ ultraviolet-visible absorption spectroscopy

Size-controlled flow synthesis of nanoporous particles are of considerable interest for future industrial applications,however,is facing challenges due to lack of in-situ method for size-characterization in fluidic environment.We present that ultraviolet-visible(UV-vis) absorption spectroscopy can be integrated into a flow-synthesis system which was produced by femtosecond laser micro machining.The shift of the absorption peak position of the ex-situ and in-situ UV-vis spectra correlates to variation of size of porous metal-organic frameworks crystals.ZIF-67 crystals with a size in the range from 200 nm to1025 nm are fabricated with the assistance of tri-ethylamine under monitoring of in-situ UV-vis spectra.The ZIF-67 crystals are converted into nanoporous carbons particles with controlled sizes.These materials show size-dependent performance in Na-ion battery and size-independent performance in metal/H_2 O seawater battery.     

超声辅助快速合成4H-吡喃衍生物

采用浸渍法制备水滑石（LDH）负载路易斯酸催化剂,并通过傅里叶红外（FT-IR）、热重分析（TG）和扫描电子显微镜（SEM）对其结构进行分析。以芳香醛、丙二腈及苯甲酰乙腈为原料,LDH负载路易斯酸为催化剂,超声辅助快速合成4H-吡喃衍生物。采用单因素法研究了催化剂、溶剂、超声时间、原料摩尔比、催化剂用量、催化剂循环等对产率的影响。结果表明:超声辅助下,LDH/ZnCl₂催化5 min即可合成4H-吡喃衍生物(4a~4i),产率82.8%~98.2%;扩大原料用量至克级,4a产率94.6%,且催化剂循环5次仍保持较高的催化性能。      

碳点的性质及其在生物传感器领域的应用

碳点(carbon dots,CDs)作为一种具有优良生物相容性、低毒性和表面功能可调的新型碳基纳米材料,在生物传感领域具有极大的应用潜力.本文对碳点的生物效应、发光性质及其发光机理进行了简述,并根据传感机制的不同,将CDs在生物传感领域的应用分为荧光(fluorescence,FL)传感器、电致发光(electroc...     

ZIF-8衍生的具有可控氧空位的ZnO对光催化去除NO的增强及毒性NO2形成的抑制

氧化锌作为一种半导体材料,具有合适的能带结构位置,高催化效率,低成本和环境可持续性,因而广泛用于光催化领域.然而,由于氧化锌的宽带隙,可见光吸收能力差以及光生电子-空穴对的快速复合,极大地影响了其光催化效率.通过引入氧空位调控光催化剂的结构被证明是一种可以改善光生载流子的分离,从而提高光催化性能的有效方法.本文以ZIF-8为前驱体,采用两步煅烧法合成了具有不同浓度氧空位分布的ZnO纳米光催化剂,通过X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、X射线光电子能谱(XPS)、电子顺磁共振(EPR)、荧光光谱仪(PL)等手段系统地分析了合成的光催化剂的理化性质,并评价了它们在可见光下光催化氧化去除NO反应性能.EPR结果表明,样品中氧空位的浓度取决于温度处理的过程.通过两步煅烧法得到氧化锌中氧空位的含量高于一步直接煅烧法所得的样品.此外,随着煅烧温度升高,合成的氧化锌晶格越完好,其氧空位含量越少.UV-Vis DRS结果表明,两步煅烧法合成的ZnO与商业的ZnO及一步法直接煅烧合成的ZnO相比,其吸光范围从紫外光拓展到了可见光,表现出了更加优异的吸光性能.光催化反应结果表明,与商业氧化锌和一步直接煅烧法所得样品相比,两步煅烧法合成的样品表现出了更优异的光催化去除NO性能,并抑制了中间产物毒性NO2的产生,促进了NO的深度氧化.具体反应路径为:在光照过程中,光生电子很容易被氧空位俘获,与O2反应产生更多的超氧自由基(·O2^-),从而将NO氧化成最终的产物硝酸盐.尤其有趣的是,先在350 ℃煅烧2小时再400℃煅烧1小时的两步法样品Z 350-400的NO去除效率分别比一步法样品Z 400(400℃煅烧)和商用ZnO高出1.5和4.6倍.这表明以MOF材料衍生的具有适当量氧空位的金属氧化物为一种高效去除NO的光催化剂具有很好的应用前景.     

酞菁铁中N4-Fe2+的氧化还原化学和氧还原性能

准确理解金属大环配合物(如N4-Fe²⁺)体系的氧化还原化学性能,对氧还原反应(ORR)电催化剂的基础研究和合理设计具有重要意义.本文采用微波法将三种不同酞菁铁类金属大环配合物吸附在碳纳米管上,分别记为(NH2)4FePc@CNTs,(t-Bu)4FePc@CNTs和FePc@CNTs,考察了取代基对Fe³⁺/Fe²⁺氧化还原电位的影响,以及碱性介质中的氧还原反应催化活性.结果表明,FePc@CNTs,(t-Bu)4FePc@CNTs和(NH2)4FePc@CNTs的ORR起始电位分别为0.98,0.96和0.96 V,而半波电位(E1/2)由高到低的顺序为FePc@CNTs(E1/2=0.91 V),(t-Bu)4FePc@CNTs(E1/2=0.87 V),(NH2)4FePc@CNTs(E1/2=0.83 V).与20%Pt/C(E1/2=0.85 V)相比,FePc@CNTsFePc@CNTs具有优异的ORR性能.在活性、稳定性和耐甲醇性方面,FePc@CNTs复合材料比其他复合材料表现出更高的ORR性能.研究发现,FePc上的供电子基团可以显著改变N4-Fe²⁺活性位点的电子云密度,增加dz 2轨道(HOMO)的能量,并观察到Fe²⁺/Fe³⁺氧化还原电位显著向阴极方向移动.结果表明,取代基的高电子贡献能力降低了HOMO和LUMO(O2的杂轨道*-轨道)之间的电子耦合,从而降低了氧还原催化活性.因此,FePc框架外围的供电子基团对ORR不利.本文阐明了取代基电子效应-金属大环配合物氧化还原电位与ORR催化性能之间的关系,为ORR催化剂活性中心的构建和调控提供了借鉴.     

Exploring Effects of Chitosan Oligosaccharides on the DSS-Induced Intestinal Barrier Impairment In Vitro and In Vivo

Intestinal barrier dysfunction is an essential pathological change in inflammatory bowel disease (IBD). The mucus layer and the intestinal epithelial tight junction act together to maintain barrier integrity. Studies showed that chitosan oligosaccharide (COS) had a positive effect on gut health, effectively protecting the intestinal barrier in IBD. However, these studies usually focused on its impact on the intestinal epithelial tight junction. The influence of COS on the intestinal mucus layer is still poorly understood. In this study, we explored the effect of COS on intestinal mucus in vitro using human colonic mucus-secreted HT-29 cells. COS relieved DSS (dextran sulfate sodium)-induced mucus defects. Additionally, the structural characteristics of COS greatly influenced this activity. Finally, we evaluated the protective effect of COS on intestinal barrier function in mice with DSS-induced colitis. The results indicated that COS could manipulate intestinal mucus production, which likely contributed to its intestinal protective effects.     

新工科背景下高分子材料类人才创新创业能力培养的改革与实践

近年来随着双一流建设的不断发展,高校更加注重对大学生创新创业能力的培养.本文基于新工科建设和工程教育专业认证的要求,以四川大学高分子材料与工程专业为例,通过构建分阶段分层次的培养步骤、全面实施"一条龙、全过程"本科生导师制、打造"本研协同"的专业培养模式以及加强实践能力培养,论述了高分子材料与工程专业学生创新创业能力的...