Composite viscoelasticity in glassy,transitional and molten states

As part of a study of viscous and elastic behaviors, over a range of temperatures from below the glass transition up to the hot melt, we here report steady-shear viscosities at 0.007 to 13 s^?1 and at 160 to 220 °C of polystyrene containing 0 to 60% by mass of 0.18-micron diameter titanium dioxide particles. The materials were shearthinning without a yield stress, with a constant activation energy at constant stress, but having a shear-dependent activation energy at constant shear rate — proportional to the volume fraction of the polymer matrix. Superposition of the flow curves at different temperatures for the unfilled and filled systems was possible. All the data were represented by one equation with four parameters: 1) a shear stress coefficient (units Pa · s²); 2) a characteristic stress level for non-Newtonian behavior, independent of temperature and composition; 3) an activation energy at constant stress; and 4) an Einstein coefficient (or intrinsic viscosity of the filler). Other equations also fitted the data, but the others diverged widely when extrapolated.     

GaN薄膜中的马赛克结构随厚度发生的变化

利用高分辨率X射线衍射(HRXRD)对MOCVD系统中生长在c面Al₂O₃上的不 同厚度的GaN薄膜内马赛克结构进行了研究. 在对称面的三轴X射线衍射曲线中, 用两种方法计算得到晶粒的垂直关联长度和水平关联长度, 两者均随着薄膜厚度的增加而增加, 并且垂直关联长度近似膜厚从倒易空间图中得出的横向关联长度也有相同的趋势, 结合非对称面的衍射曲线用Williamson-Hall方法和外推法分 别拟合出晶粒的面外倾斜角和面内扭转角, 他们随着薄膜厚度的增加显著减少, 这一切都表明厚度的增加, 晶粒的单向有序排列越来越整齐, 外延片的质量越来越高. 关键词： GaN薄膜马赛克结构 厚度 HRXRD     

单谐振腔外部Q值的计算方法

 通过对带有耦合器的单驻波腔进行等效电路分析,推导出可计算带有耦合波导的单谐振腔外部Q值的反射相位法,该方法通过计算不同频率的反射相位来确定谐振频率和外部Q值。详细叙述了在CST Microwave Studio中用谐振模式求解法、直接时域跟踪法和反射相位法进行计算的步骤;用这3种方法分别计算了二次发射微波电子枪的外部Q值并和实验测量结果做了比较。结果显示3种计算方法都有很高的精度,但反射相位法的速度最快,耗时1 071 s。计算发现外部Q值与耦合口长度的4.1次方成反比。     

有ITO透明导电膜的平面分层介质系统的电磁波性能理论研究

理论研究了有ITO(indium tin oxide)透明导电膜的多层平面分层介质系统的电磁性能，给出的理论曲线和实测曲线符合很好.多层平面分层介质系统的电磁性能与ITO膜(方块电阻为8Ω)所在界面位置和平面分层介质系统层数及各层厚度等有关.优化设计了一种含有ITO透明导电膜的厚度仅7.35mm的四层平面分层介质系统，其在8—18GHz频段内电磁波反射性能很好.作为多层平面分层系统中的ITO导电膜，其方块电阻应低于30Ω，并且越小，其反射性能越好. 关键词： 多层平面介质系统 电磁性能 ITO透明导电膜     

一种新的磷化铟复合沟道高电子迁移率晶体管小信号物理模型

针对磷化铟(InP)复合沟道高电子迁移率晶体管(HEMT)的特点，对常规单沟道HEMT的小信号物理模型进行了修正，提出了一种新的用于复合沟道HEMT的小信号物理模型，用商用器件模拟软件ISE(integrated systems engineering)对其进行了仿真验证，对比了实测和仿真的I-V特性及转移特性曲线，重点研究了在InGaAs/InP双层沟道中考虑量子效应后的电场和电流密度随着不同栅电压的变化趋势，研究结果表明，由于在沟道中存在量子效应，在栅下靠源端低电场区域，电流主要分布在InGaAs沟道 关键词： 高电子迁移率晶体管 复合沟道 物理模型 磷化铟     

氧离子激发光谱的精密测量

在2×1.7串列加速器上利用束-箔方法和装有CCD的Spectrapro-500i光谱单色仪的测量装置，在2MeV束能下研究了250nm—350nm波长范围离化态氧原子光谱.在250nm—350nm范围已确定的201条光谱线，确定的跃迁大部分属于OⅡ到OⅣ原子的n，l能级间的跃迁，一些实验结果与现有理论一致.实验发现，在这个范围的光谱大都属于弱跃迁谱线，并且许多谱线是以前没有观测到的. 关键词： 串列加速器 氧离子 CCD 光谱     

用自适应脉冲微扰引导混沌系统到周期解

用自适应脉冲微扰方法控制的系统的某个系统变量作为驱动,设计了一种自适应控制器方法对两个或多个响应混沌系统进行脉冲微扰,引导这些系统从混沌运动到低周期运动,实现同时控制多个混沌系统到不同的周期态. 当选择相同的自适应控制器输入变量实施脉冲微扰时,还可控制两个或多个混沌系统达到不同的周期态同步. 通过对R?ssler混沌系统的仿真研究证实了方法的有效性. 关键词： 混沌控制 系统参量 自适应控制器 脉冲微扰 周期态同步     

Nanomaterials in Cerebrovascular Disease Diagnose and Treatment

Cerebrovascular diseases (CVDs) are among the most serious diseases with high mortality and disability rates. The prevalent diagnosis and treatment methods of CVDs include imaging and interventional therapy. With the development of nanotechnology, large numbers of nanomaterials have been applied to the diagnosis and treatment of CVDs, mainly including carbon nanotubes, quantum dots, fullerenes, and dendrimers. In this review, the applications of nanomaterials in the field of diagnosis and treatment of CVDs, mainly including drug target delivery, imaging, therapy, endovascular treatment, and angiogenesis, are summarized. The applications of nanomaterials in the field of CVD are almost in the laboratory, and more effort is needed for clinical translation. The aim of this review is to provide useful information for future research and equipment development.     

Au-Nanoparticle-Array/Aligned-Ag-Nanowire-Based Flexible Dual Plasmonic Substrate for Sensitive Surface-Enhanced Raman Scattering Detection

The fabrication of flexible surface-enhanced Raman scattering (SERS) substrates for sensitive detection on uneven or irregular surfaces is challenging. In this study, a flexible dual plasmonic SERS (FDPS) substrate rationally constructed using Au nanoparticle (AuNP) arrays/aligned Ag nanowires (AgNWs) and elastic polyurethane (PU) is demonstrated. It exhibits high sensitivity (detection limit of 10⁻⁸ m for melamine and 10⁻¹⁰ m for malachite green) and excellent reproducibility. The well-designed structure of AuNP arrays/aligned AgNWs fabricated using block copolymer self-assembly and oil–water–air interfacial self-assembly successfully enhances the electromagnetic field through plasmonic coupling. In addition, the FDPS substrate retains a high SERS sensitivity after exposure to air at room temperature for 30 days because of the high stability of AuNP arrays and antioxidation characteristic of the PU covered on the aligned AgNWs. Even after undergoing stretching, bending, and twisting for 100 cycles, the FDPS substrate maintains a stable SERS activity owing to the introduction of the elastic PU. This study demonstrates a potential application of SERS detection under practical conditions for irregular surfaces and may be helpful in the development of flexible sensors.