相变温度低且宽的含有胆甾烯基和反式-4-烷基环己基苯氧基的二介晶化合物

Unsymmetrical dimesogenic compounds with cholesteryl and 4-（trans-4-n-alkylcyclohexyl）phenoxy parts were synthesized by condensation of cholester-3-yl 6-bromohexanoate with appropriate 4-（trans-4-n-alkylcyclohexyl）- phenols. Structures and thermal phase behaviour of these dimesogenic compounds have been confirmed by IR, IH NMR, elemental analysis, DSC, polarity microscopy and XRD measurements. Their thermal phase behaviour was significantly different with that of other cholesterol-based dimesogens while they exhibited low and wide phase transition temperature.     

含氰基侧基聚芳醚砜的合成与表征

汉２，６－二卤苯甲腈、４，４′－二氯二苯砜、４，４′－二羟基二苯砜、间苯二酚、对苯二酚、酚酞及双酚Ａ为主要原料，合成了含不同结构单元和不同氰基含量的含氰基侧基的聚芳醚砜，并采用ＩＲ、＾１３ＣＮＭＲ等分析手段对其结构进行了表征，同时研究了结构单元和氰基含量对聚芳醚砜性能的影响。     

螺旋结构与旋光性——2.脂族链状化合物的螺旋结构和旋光性

利用弯曲键理论,详细讨论了旋光性的脂肪族链状化合物分子内存在的螺旋结构,同样是右螺是右旋的,左螺旋是左旋的。从螺旋方向可以推断旋光方向,知道旋光方向也可以推断构型。     

担载液相催化剂的研究——Ⅳ.催化剂的原位红外光谱表征

本文利用原位红外光谱方法对铑基担载液相催化剂(SLPC)在接近于实际反应条件下进行了表征。结果表明,新鲜催化剂上,铑膦络合物主要以二聚物的形式存在,如Rh_2(CO)_2(PPh_3)_4而在合成气或反应气氛中,催化剂铑膦络合物以单核络合物HRh(CO)_2(PPh_3)_2的形式存在。文中还对SLPC在CO,H_2,C_2-H_4,空气和HCl中处理时铑络合物种的变化进行了原位观察。实验结果表明,SLPC上活性铑络合物与对应的均相过程完全一致,进一步证实了SLPC催化在微观上就是一个均相催化过程。     

酶分子在试管内的定向进化及其在手性有机物合成中的应用

本文扼要介绍了当今改进酶分子性能的有效手段———分子定向进化技术的基本方法如易错PCR和DNA洗牌,以及派生的一些新技术的原理与进展,并列举了在手性有机物合成中一些成功的实例,为该领域的研究与应用提供了一些新的信息。     

Two new compounds from Zingiber officinale

A new cyclic diarylheptanoid,1,5-epoxy-3-hydroxy-1-(3-methoxy-4,5-dihydroxyphenyl)-7-(4-hydroxyphenyl)-heptane (1),as well as a new monoterpene,10-O-β-D-glucopyranosyl-hydroxy cineole (2) were isolated from the rhizomes of Zingiber officinale. The structures of compounds 1 and 2 were established based on their spectral data.In addition,the antioxidant activities of these compounds were also measured.     

Synthesis of silk-like FeS2/NiS2 hybrid nanocrystals with improved reversible oxygen catalytic performance in a Zn-air battery

The development of highly active and stable reversible oxygen electrocatalysts is crucial for improving the efficiency of metal-air battery devices. Herein, an efficient liquid exfoliation strategy was designed for producing silk-like FeS₂/NiS₂ hybrid nanocrystals with enhanced reversible oxygen catalytic performance that displayed excellent properties for Zn-air batteries. Because of the unique silk-like morphology and interface nanocrystal structure, they can catalyze the oxygen evolution reaction (OER) efficiently with a low overpotential of 233 mV at j = 10 mA cm^?2. This is an improvement from the recently reported catalysts in 1.0 M KOH. Meanwhile, the oxygen reduction reaction (ORR) activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals showed an onset potential of 911 mV and a half-wave potential of 640 mV. In addition, the reversible oxygen electrode activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals was calculated to be 0.823 V, based on the potential of the OER and ORR. Further, the homemade rechargeable Zn-air batteries using FeS₂/NiS₂ hybrid nanocrystals as the air-cathode displayed a high open-circuit voltage of 1.25 V for more than 17 h and an excellent rechargeable performance for 25 h. The solid Zn-air batteries exhibited an excellent rechargeable performance for 15 h. This study provided a new method for designing interface nanocrystals with a unique morphology for efficient multifunctional electrocatalysts in electrochemical reactions and renewable energy devices.     

Synthesis and Photophysical Properties of Hetero‐Bischelated Complexes of Rhodium(III) Containing Phenyl‐Pyridin‐2‐Ylmethylene‐Amine

Three new hetero‐bischelated rhodium (III) complexes of cis‐[Rh(PA)(L)Cl₂]Cl (where PA = phenylpyridin‐2‐ylmethylene‐amine; L = 2,2′‐bipyridine, 2,2′‐dipyridylamine and 1,10‐phenanthroline) have been successfully prepared and characterized. Each complex shows high intensity bands in the UV region, and these are assigned to spin‐allowed π‐π* transitions. The medium‐intensity absorption band profile in the lower energy region can be explained by convolution of spin‐allowed CT and d‐d* transitions. The emission spectra at low temperature (77 K) of these complexes in EtOH/MeOH (4:1 v/v) are virtually identical. They all exhibit a broad, symmetric, and structureless red emission with a microsecond lifetime and hence are assigned as the d‐d* phosphorescence.     

Pd-catalyzed intermolecular amidation of aryl halides: the discovery that xantphos can be trans-chelating in a palladium complex

A general method for the intermolecular coupling of aryl halides and amides using a Xantphos/Pd catalyst is described. This system displays good functional group compatibility, and the desired C-N bond forming process proceeds in good to excellent yields with 1-4 mol % of the Pd catalyst. Additionally, the arylation of sulfonamides, oxazolidinones, and ureas is reported. The efficiency of these transformations was found to be highly dependent on reaction concentrations and catalyst loadings. A Pd complex resulting from oxidative addition of 4-bromobenzonitrile, (Xantphos)Pd(4-cyanophenyl)(Br) (II), was prepared in one step from Xantphos, Pd(2)(dba)(3), and the aryl bromide. Complex II proved to be an active catalyst for the coupling between 4-bromobenzonitrile and benzamide. X-ray crystallographic analysis of II revealed a rare trans-chelating bisphosphine-Pd(II) structure with a large bite angle of 150.7 degrees.     

Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007