CAROTENOID-TO-BACTERIOCHLOROPHYLL SINGLET ENERGY TRANSFER IN CAROTENOID-INCORPORATED B850 LIGHT-HARVESTING COMPLEXES OF Rhodobacter sphaeroides R-26.1

Four carotenoids, 3,4,7,8-tetrahydrospheroidene, 3,4,5,6-tetrahydrospheroidene, 3,4-dihydrospheroidene and spheroidene, have been incorporated into the B850 light-harvesting complex of the carotenoidless mutant, photosynthetic bacterium, Rhodobacter sphaeroides R-26.1. The extent of π-electron conjugation in these molecules increases from 7 to 10 carbon-carbon double bonds. Carotenoid-to-bacteriochlorophyll singlet state energy transfer efficiencies were measured using steady-state fluorescence excitation spectroscopy to be 54 ± 2%, 66 ± 4%, 71 ± 6% and 56 ± 3% for the carotenoid series. These results are discussed with respect to the position of the energy levels and the magnitude of spectral overlap between the S, (2′AJ state emission from the isolated carotenoids and the bacteriochlorophyll absorption of the native complex. These studies provide a systematic approach to exploring the effect of excited state energies, spectral overlap and excited state lifetimes on the efficiencies of carotenoid-to-bacteriochlorophyll singlet energy transfer in photosynthetic systems.     

Analysis of organomercury compounds in sediments by capillary GC with atomic fluorescence detection

Analysis of methyl- and ethylmercury (MM and EM) halides in biological and environmental samples is generally performed by gas chromatography with electron capture detection. Tedious sample work-up protocols and poor chromatographic response (using packed columns) have, however, shown the need for the development of new methods in this field. This paper reports a sensitive method, free from these deficiencies, for the determination of methyl- and ethylmercury. The organomercury compounds (MM and EM) are first released from the sample matrix, by the combined action of acidic potassium bromide and cupric ions, and then extracted into dichloromethane. The initial extracts are subjected to thiosulfate clean-up and the organomercury species are isolated as their chloride derivatives by addition of cupric chloride, and subsequent extraction into a small volume of organic solvent. Capillary GC coupled with atomic fluorescence detection provided excellent separation efficiencies for methyl- and ethylmercury and proved to be a very selective and sensitive technique. The absolute detection limit for both MM and EM was found to be 0.2 pg.     

Charge reversal of three alkylamide ions: Free nitrenium ions

The methylnitrenium, ethylnitrenium and dimethylnitrenium ions are prepared by charge reversal collisional activation (CR CA) of the corresponding negative ions; their collisional activation mass spectra are shown to support the assigned structures. MINDO/3 energies are used to evaluate relative energies of [CH₄N]⁺ and [C₂H₆N]⁺ isomers, and to determine whether unstable forms rearrange spontaneously to stable ones. As in other examples, charge reversal here generates cations that do not exist in an energy well, but their transient existence is established because their fragmentation is more rapid than their rearrangement to a more stable form.     

Geometry of the Fluorides, Oxofluorides, Hydrides, and Methanides of Vanadium(V), Chromium(VI), and Molybdenum(VI): Understanding the Geometry of Non-VSEPR Molecules in Terms of Core Distortion

This paper describes a study of the topology of the electron density and its Laplacian for the molecules VF(5), VMe(5), VH(5), CrF(6), CrMe(6), CrOF(4), MoOF(4), CrO(2)F(2,) CrO(2)F(4)(2)(-) and CrOF(5)(-) all of which, except VF(5,) CrF(6), and CrOF(5)(-) have a non-VSEPR geometry. It is shown that in each case the interaction of the ligands with the metal atom core causes it to distort to a nonspherical shape. In particular, the Laplacian of the electron density reveals the formation of local concentrations of electron density in the outer shell of the core, which have a definite geometrical arrangement such as four in a tetrahedral arrangement or five in a square pyramidal or trigonal bipyramidal and six in an octahedral arrangement. Ligands that are predominately covalently bonded are found opposite regions of charge depletion between these core charge concentrations. In VH(5), VMe(5), CrOF(4), and MoOF(4), these core charge concentrations have a square pyramidal arrangement, and the regions of charge depletions have the corresponding inverse square pyramidal arrangement so that these molecules have a square pyramidal geometry rather than a trigonal prism geometry. In CrMe(6), there are five core charge concentrations with a trigonal bipyramidal arrangement so that the regions of charge depletion have a trigonal prismatic arrangement and the molecule has the corresponding trigonal prism geometry rather than an octahedral geometry. In contrast, molecules in which the only ligand is the more ionically bound fluorine are less affected by core distortion and have VSEPR-predicted structures. The unexpected bond angles in CrO(2)F(2) and the preference of CrO(2)F(4)(2)(-) for a cis structure are also discussed in terms of the pattern of core charge concentrations.     

Synthesis and conformational analysis by 1H NMR and restrained molecular dynamics simulations of the cyclic decapeptide [Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly]

Summary The design of enzyme mimics with therapeutic and industrial applications has interested both experimental and computational chemists for several decades. Recent advances in the computational methodology of restrained molecular dynamics, used in conjunction with data obtained from two-dimensional ¹H NMR spectroscopy, make it a promising method to study peptide and protein structure and function. Several issues, however, need to be addressed in order to assess the validity of this method for its explanatory and predictive value. Among the issues addressed in this study are: the accuracy and generizability of the GROMOS peptide molecular mechanics force field; the effect of inclusion of solvent on the simulations; and the effect of different types of restraining algorithms on the computational results. The decapeptide Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly, which corresponds to the sequence of ACTH_1–10, has been synthesized, cyclized, and studied by two-dimensional ¹H NMR spectroscopy. Restrained molecular dynamics (RMD) and time-averaged restrained molecular dynamics (TARMD) simulations were carried out on four different distance-geometry starting structures in order to determine and contrast the behavior of cyclic ACTH_1–10 in vacuum and in solution. For the RMD simulations, the structures did not fit the NOE data well, even at high values of the restraining potential. The TARMD simulation method, however, was able to give structures that fit the NOE data at high values of the restraining potential. In both cases, inclusion of explicit solvent molecules in the simulation had little effect on the quality of the fit, although it was found to dampen the motion of the cyclic peptide. For both simulation techniques, the number and size of the NOE violations increased as the restraining potential approached zero. This is due, presumably, to inadequacies in the force field. Additional TARMD vacuum-phase simulations, run with a larger memory length or with a larger sampling size (16 additional distance-geometry structures), yielded no significantly different results. The computed data were then analyzed to help explain the sparse NOE data and poor chymotryptic activity of the cyclic peptide. Cyclic ACTH_1–10, which contains the functional moieties of the catalytic triad of chymotrypsin, was evaluated as a potential mimic of chymotrypsin by measurement of the rate of hydrolysis of esters of L-and d-phenylalanine. The poor rate of hydrolysis is attributed to the flexibility of the decapeptide, the motion of the side chains, which result in the absence of long-range NOEs, the small size of the macrocycle relative to that of the substrate, and the inappropriate orientation of the Gly, His, and Ser residues. The results demonstrate the utility of this method in computer-aided molecular design of cyclic peptides and suggest structural modifications for future work based on a larger and more rigid peptide framework.     

Concurrent restructuring and oxidation of the surface of n-hexane plasma polymers during aging in air

Angle-dependent XPS and air/water contact angle (CA) measurements were performed on specimens of n-hexane plasma polymers at various times after fabrication in order to monitor the aging of the surfaces in contact with air. XPS revealed incorporation of oxygen over extended periods of time. The depth distribution of O changed in the course of aging. CAs decreased over the first 3 weeks, then increased again, and finally stabilized at 5 weeks. These results were interpreted in terms of two concurrent processes: spontaneous oxidation (initiated by trapped radicals), which increased the surface polarity, and surface restructuring, which caused the partial removal of polar groups from the interface with air. The former process made a larger contribution to the overall aging of the surfaces but the latter process also contributed measurably. Over the first 3 weeks, oxidation was rapid and surface restructuring was not competitive. Subsequently, the oxygen uptake slowed down markedly, and the outermost surface layers became oxygen depleted relative to the deeper layers, due to partial surface reorientation. The surface topography, assessed by STM, did not change on aging. The aging of n-hexane plasma polymer surfaces thus is due to superimposed effects arising from post-deposition oxidative processes and partial surface reorientation.     

The work of ISO-REMCO’s accreditation task group

This paper discusses some of the work of ISO-REMCO’s Task Group 4 (TG4) – the Accreditation TG, giving firstly a brief account of the recently published ISO Guide 34 – which gives guidance on the type of quality system a reference material producer should have in place. Secondly, work on the future development of Guide 34 to produce a document against which it will be possible for producers to be accredited without reference to ISO Guide 25 is discussed, and thirdly, the possible formation of an international register of CRM producers, which will provide users with information about the quality status of different producers, is considered.     

Intrinsic and Intramolecular Lipophilicity Effects in O-Glucuronides

In this study, we compared the lipophilicity of O-glucuronides and their aglycones. Distribution coefficients (log D) and P values of neutral species (log P) were determined by centrifugal partition chromatography (CPC) in octanol/buffer systems. Two-phase potentiometry was also used to measure the log P value of some lipophilic solutes. The experimentally determined global influence of glucuronidation on lipophilicity, obtained as the difference (decrement) log P_{(glucuronide)} ? log P_(aglycone), was found to be ?1.30 ± 0.16 (n = 4) for glucuronides of alcohols (methyl, menthyl, neomenthyl, and chloramphenicol O-glucuronide). The mean decrement was ?2.06 ± 0.31 (n = 9) for glucuronides of phenols (phenyl, p-nitrophenyl, 1-naphthyl, 6-bromo-2-naphthyl, 4-methylumbelliferyl, 3-coumarinyl, phenolphthalein, 4′-benzophenonyl O-glucuronide, and diflunisal phenolic glucuronide). For the acylglucuronide of diflunisal and its rearrangement isomers, the mean decrement was ?1.80 ± 0.08 (n = 4; range ?1.7 to ?1.9). Differences in through-bond proximity effects as parametrized in the CLOGP algorithm seem to account for much of this difference. Conformational factors may also play a role, although it appears modest and unassessable for the glucuronides investigated here. The results imply that in vivo glucuronidation should have a stronger influence on the excretion of phenols than on that of alcohols.     

Studies on monobactams II. Synthesis and β-lactamase inhibitory activity of 4α-methyl-3-[(thien-2-yl)-methylene]-2-azetidinone-1-sulfonate

Two monobactam derivatives, potassium 4-methyl-(3E)-[(thien-2-yl)methylene]-2-azetidinone-1-sulfonate and its (3Z)-isomer, were prepared and evaluated for their -lactamase inhibitory activities. These compounds were devoid of -lactamase inhibitory activity.SynPhar Laboratories Inc., #2, 4290-91A Street, Edmonton, Alberta T6E 5V2, Canada. Tokushima Research Institute, Taiho Pharmaceutical Co., Ltd., 224-2 Ebisuno Hiraishi, Kawauchi-cho, Tokushima 771-01, Japan. Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1548–1552, November, 1998.     

Electrophoretic extraction and analysis of DNA from chitosan or poly-l-lysine-coated alginate beads

Alginate beads containing entrapped DNA were produced using both external and internal calcium sources, and coated with chitosan or poly-l-lysine membranes. The beads were assayed with DNase nuclease to determine formulation conditions offering the highest level of DNA protection fromnucleic acid hydrolysis, simulating gastrointestinal exposure. A method was developed to extract and assay intracapsular DNA through a modified agarose electrophoresis system. Both external and internally gelled beads were permeable to DNase (M_w=31 kDa), indicated by the absence of DNA after nuclease exposure. At low levels of DNase exposure, coated high guluronic content alginate beads offered a higher level of DNA protection compared with coated beads with low guluronic alginate. No apparent correlation was found with chitosan membrane molecular weight and degree of deacetylation; however, increasing poly-l-lysine molecular weight appeared to increase DNase exclusion from beads. At elevated levels of DNase exposure, DNA hydrolysis was evident within all coated beads with the exception of those coated with the highest molecular weight poly-l-lysine (M_w=197.1 kDa), which provided almost total nuclease protection. Optimal combination then for DNA protection from nucleases is a high guluronic alginate core, coated with high molecular weight poly-l-lysine.