Fused isoquinolines: 3-aryl-2,3,4,5-tetrahydro-1H-pyrrolo[2,3-c]isoquinoline-1,5-dione-2-spiro-4′-(1′-alkyl-1′,4′-dihydropyridine)s

Previously unknown 3-arylamino-1,2-dihydro-1-isoquinolones were obtained by condensation of 2-cyanomethylbenzoic acid with arylamines. Isonicotinoylation of the compounds was shown to proceed at the carbon atom in the 4-position to give 3-arylamino-4-isonicotinoyl-1,2-dihydro-1-isoquinolones which were quaternized with alkylating agents and formed the corresponding pyridinium salts. Deprotonation of the latter induced intramolecular conjugated addition with the pyrrole ring closure and formation of spiro compounds. The structure of the products was confirmed by NMR, IR and UV spectroscopy and by synthesis of the model compound, 3-(4-tolyl)-2,3,4,5-tetrahydro-1H-pyrrolo[2,3-c]isoquinoline-1,5-dione.     

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.     

Electron capture dissociation of polypeptides using a 3 Tesla Fourier transform ion cyclotron resonance mass spectrometer

Electron capture dissociation (ECD) of polypeptides has been demonstrated using a commercially available 3 Tesla Fourier transform ion cyclotron resonance (FTICR) instrument. A conventional rhenium filament, designed for high-energy electron impact ionisation, was used to effect ECD of substance P, bee venom melittin and bovine insulin, oxidised B chain. A retarding field analysis of the effective electron kinetic energy distribution entering the ICR cell suggests that one of the most important parameters governing ECD for this particular instrument is the need to employ low trapping plate voltages. This is shown to maximise the abundance of low-energy electrons. The demonstration of ECD at this relatively low magnetic field strength could offer the prospect of more routine ECD analysis for the wider research community, given the reduced cost of such magnets and (at least theoretically) the greater ease of electron/ion cloud overlap at lower field.     

Finite-size scaling for Potts models

Recently, Borgs and Kotecký developed a rigorous theory of finite-size effects near first-order phase transitions. Here we apply this theory to the ferromagneticq-state Potts model, which (forq large andd2) undergoes a first-order phase transition as the inverse temperature is varied. We prove a formula for the internal energy in a periodic cube of side lengthL which describes the rounding of the infinite-volume jumpE in terms of a hyperbolic tangent, and show that the position of the maximum of the specific heat is shifted by _m (L)=(Inq/E)L ^–d +O(L ^–2d ) with respect to the infinite-volume transition point _t . We also propose an alternative definition of the finite-volume transition temperature _t (L) which might be useful for numerical calculations because it differs only by exponentially small corrections from _t .     

Suppression of deleterious effects of free silanols in liquid chromatography by imidazolium tetrafluoroborate ionic liquids

Silica-based stationary phases are commonly used in liquid chromatography, but their surface acidity causes known problems, especially when separating basic compounds. Deleterious effects of free silanols are not fully removed by standard prevention procedures consisting in adding alkylamines or other amino quenchers to the eluents. We found that ionic liquids of the imidazolium tetrafluoroborate class, added to mobile phases at concentrations of 0.5-1.5% (v/v), blocked silanols and provided excellent thin-layer chromatographic separations of strongly basic drugs which were otherwise not eluted, even with neat acetonitrile as the mobile phase. The silanol suppressing potency of imidazolium tetrafluoroborates was demonstrated to markedly exceed that of the standard mobile phase additives, like triethylamine, dimethyloctylamine and ammonia. The proposed new mobile phase additives were also demonstrated to provide reliable lipophilicity parameters of base drug analytes as determined by gradient mode of high-performance liquid chromatography. By applying the readily available and environmentally friendly imidazolium tetrafluoroborate ionic liquids, simple and efficient means of improvement of liquid chromatographic analysis of organic bases were elaborated.     

Synthesis and characterization of dinuclear ruthenium complexes covalently linked to Ru(II) tris-bipyridine: an approach to mimics of the donor side of photosystem II

To mimic the electron-donor side of photosystem II (PSII), three trinuclear ruthenium complexes (2, 2a, 2b) were synthesized. In these complexes, a mixed-valent dinuclear Ru2(II,III) moiety with one phenoxy and two acetato bridges is covalently linked to a Ru(II) tris-bipyridine photosensitizer. The properties and photoinduced electron/energy transfer of these complexes were studied. The results show that the Ru2(II,III) moieties in the complexes readily undergo reversible one-electron reduction and one-electron oxidation to give the Ru2(II,III) and Ru2(III,III) states, respectively. This could allow for photooxidation of the sensitizer part with an external acceptor and subsequent electron transfer from the dinuclear ruthenium moiety to regenerate the sensitizer. However, all trinuclear ruthenium complexes have a very short excited-state lifetime, in the range of a few nanoseconds to less than 100 ps. Studies by femtosecond time-resolved techniques suggest that a mixture of intramolecular energy and electron transfer between the dinuclear ruthenium moiety and the excited [Ru(bpy)3]2+ photosensitizer is responsible for the short lifetimes. This problem is overcome by anchoring the complexes with ester- or carboxyl-substituted bipyridine ligands (2a, 2b) to nanocrystalline TiO2, and the desired electron transfer from the excited state of the [Ru(bpy)3]2+ moiety to the conduction band of TiO2 followed by intramolecular electron transfer from the dinuclear Ru2(II,III) moiety to photogenerated Ru(III) was observed. The resulting long-lived Ru2(III,III) state decays on the millisecond timescale.     

A detailed resonance Raman spectrum of Nickel(II)-substituted Pseudomonas aeruginosa azurin

Nickel(II) and cobalt(II) derivatives of the blue copper protein Pseudomonas aeruginosa azurin have been studied by resonance Raman (RR) spectroscopy at liquid-nitrogen temperatures. Vibrational assignments for the observed RR bands of Ni(II)-azurin have been made through a study of (62)Ni-substituted azurin. A comparison of Ni(II)-azurin RR spectra with those of the wild type (Cu-containing) protein showed Ni(II)-S(Cys) stretching vibrations, nu(Ni-S)(Cys), at substantially lower frequencies (approximately 360 versus approximately 400 cm(-1), respectively), indicating that the Ni(II)-S(Cys) bond is much weaker than the corresponding Cu(II)-S(Cys) bond. Resonance enhanced predominantly nu(Ni-N)(His) modes indicate that the metal-N(His) bond distances in the Ni(II) derivative are the same as those in native azurin. The vibrational data also confirm a tetrahedral disposition of ligands about the metal in Ni(II)-azurin found in the protein crystallographic structures. As expected, excitation profile measurements on Ni(II)-azurin show that the nu(Ni-S)(Cys) assignable modes give maxima at the 440-nm absorption band, which confirms a S(Cys) --> Ni(II) charge-transfer origin of the 440-nm electronic transition in Ni(II)-substituted azurin.     

Chemical Bonding and Pressure‐Induced Change of the Electron Configuration of Ytterbium in β‐YbAgGa2

Single‐phase polycrystalline samples of the intermetallic compound β‐YbAgGa₂ were synthesized by inductive heating and subsequent annealing for eight weeks at 670 K. Magnetic properties were characterized by susceptibility measurements and indicated intermediate valence of ytterbium at ambient pressure. Angle‐dispersive X‐ray powder diffraction data of orthorhombic β‐YbAgGa₂ indicate stability of the phase in the investigated pressure range from 0.1 MPa (ambient pressure) to 19 GPa. The pressure‐induced volume decrease is accompanied by an increase of the effective valence from 2.17 at ambient conditions to 2.71 at 16 GPa as evaluated by X‐ray absorption spectroscopy at the Yb L_III threshold. Analysis of the chemical bonding in β‐YbAgGa₂ by integrating the electron density of the polyanion in basins as defined by the electron localization function results in an electron count Yb^2.7+[(Ag^0.2—)(Ga1(3b)^1.0—)(Ga2(4b)^1.5—)]. This finding is close to the expected values calculated by means of the Zintl rules and fits well the results of magnetic susceptibility measurements and XAS investigations.     

Theoretical DFT and experimental Raman and NMR studies on thiophene, 3-methylthiophene and selenophene

The results of extended MO calculations using density functional theory (DFT) approximation supported by experimental Raman, ¹H and ¹³C NMR studies on thiophene are reported. Raman spectra of liquid thiophene were re-examined and the performance of a hybrid B3PW91 density functional was compared with the ab initio restricted Hartree–Fock (RHF) method. With the basis sets of the 6-311++G^** quality, the DFT calculated bond lengths, dipole moments and harmonic vibrations were predicted in a very good agreement with available experimental data.

Additionally, the results on thiophene were extended by calculations on 3-methylthiophene and selenophene. In this case, a significant change in geometry and charge distribution in thiophene ring due to a methyl group substituent or replacement of sulphur by selene atom was observed.

A linear correlation between the predicted harmonic vibrational frequencies (scaled using SQM method) and experimental ones for thiophene, selenophene and 3-methylthiophene was shown. The theoretically calculated spectra have satisfactorily reproduced the available experimental spectra for thiophene and selenophene.     

A generic approach to the impurity profiling of drugs using standardised and independent capillary zone electrophoresis methods coupled to electrospray ionisation mass spectrometry

Three standardised, capillary zone electrophoresis-electrospray ionisation mass spectrometry (CZE-ESI-MS) methods were developed for the analysis of six drug candidates and their respective process-related impurities comprising a total of 22 analytes with a range of functional groups and lipophilicities. The selected background electrolyte conditions were found to be: 60/40 v/v 10 mM ammonium formate pH 3.5/organic, 60/40 v/v 10 mM ammonium acetate pH 7.0/organic and 10 mM piperidine, pH 10.5, where the organic solvent is 50/50 v/v methanol/acetonitrile. The coaxial sheath flow consisted of either 0.1% v/v formic acid in 50/50 v/v methanol/water, or 10 mM ammonium acetate in 50/50 v/v methanol/water, depending on the mixture being analysed. Factor analysis and informational theory were used to quantify the orthogonality of the methods and predict their complementarities. The three selected CZE-ESI-MS methods allowed the identification of 21 out of 22 of all the drug candidates and their process-related impurities and provided orthogonality with four established high-performance liquid chromatography-mass spectrometry (HPLC-MS) methods. These methodologies therefore form the basis of a generic approach to impurity profiling of pharmaceutical drug candidates and can be applied with little or no analytical method development, thereby offering significant resource and time savings.